データ収集ジョブの制御
すべてのデータ収集タスク(およびデータ消去タスク)がジョブ ダッシュボードから制御されます。「ジョブ ダッシュボードを使用したジョブの管理」を参照してください。データ収集ジョブは、「システムジョブ」に一覧表示されています。
システム ジョブ
Cisco EPN Manager によって実行されるバックグラウンドデータ収集ジョブは、[システムジョブ(System Jobs)] の下に一覧表示されます。[システムジョブ(System Jobs)] を表示するには、
の順に選択します。ここでは、ジョブが正常に完了したか、部分的に成功したか、または失敗したかを確認できます。また、ジョブを編集、実行、または一時停止することもできます。ジョブの管理の詳細については、次を参照してください。ジョブスケジュールを編集するには、次の手順を実行します。
手順
ステップ 1 |
の順に選択します。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||
ステップ 2 |
必要なジョブを選択します。たとえば、[インフラストラクチャジョブ(Infrastructure jobs)] の下の [デバイス設定のバックアップ-外部(Device Config Backup-External)] です。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||
ステップ 3 |
[Edit Schedule] をクリックします。[スケジュール(Schedule)] ウィンドウで、[開始時刻(Start Time)] を選択し、[繰り返し(Recurrence)] 間隔を選択します。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||
ステップ 4 |
[実行(Submit)] をクリックして保存します。 [実行(Run)] および [シリーズの一時停止(Pause Series)] タブをクリックして、ジョブを実行または一時停止することもできます。
|