アップグレード ガイドライン
ここでは、アップグレード ガイドラインについて説明します。
リリース 2.3.1 以降の OpenStack 用 Cisco ACI プラグインは、リリースに対応する ACI ファブリック ソフトウェア、および以降のすべての ACI ファブリック ソフトウェアをサポートします。OpenStack 用 ACI プラグインは、各リリースに対応するバージョンより前の ACI ファブリック ソフトウェアをサポートしません。たとえば OpenStack 用 ACI プラグイン リリース 3.1 では、ACI ファブリック ソフトウェア 3.1 以降はサポートされますが、3.0 以前のバージョンはサポートされません。
アップグレード前のガイドライン
最初に Cisco ACI プラグインをアップグレードする必要があります。
さまざまな OpenStack バージョンとプラグインの互換性について詳しくは、次の URL にある『Cisco ACI Virtualization Compatibility Matrix』を参照してください。
(注) |
OpenStack プラグインのアップグレード前に ACI ファブリックをアップグレードする必要がある例外が 1 つあります。ACI ファブリックを 2.x から 3.x リリースにアップグレードする場合は、OpenStack プラグイン 2.3.1-newton-20180419 以降の実行が必要です。下位バージョンのプラグインを実行している場合、まずはそのプラグインに付属していた agent_ovs を 2.3.1-newton-20180419 に付属していた agent_ovs にアップグレードする必要があります。詳細については、agent_ovs の更新を参照してください。 |
agent_ovs の更新
ACI ファブリックを 2.x から 3.x リリースにアップグレードする場合は、OpenStack プラグイン 2.3.1-newton-20180419 以降の実行が必要です。下位バージョンのプラグインを実行している場合、まずはそのプラグインに付属していた agent_ovs を 2.3.1-newton-20180419 に付属していた agent_ovs にアップグレードする必要があります。
Openstack VMM に接続されている各サーバに root としてログインし、次の手順を実行します。
手順
ステップ 1 |
APIC OpenStack およびコンテナ プラグインのソフトウェア ダウンロード リンクから Openstack Newton ACI プラグインの RPM パッケージをダウンロードします。 |
ステップ 2 |
ディレクトリを作成し、そのファイルのコンテンツを抽出します。 例:
|
ステップ 3 |
次の RPM を更新します。 例:
|
ステップ 4 |
agent-ovs を再起動します。 例:
|
アップグレードのガイドライン
次の URL にある『Cisco APIC Management, Installation, Upgrade, and Downgrade Guide』の情報に従って Cisco ACI ファブリックをアップグレードできます。
Cisco ACI プラグインと Cisco ACIファブリックのリリースの組み合わせがサポートされている場合に限り、プラグインをアップグレードせずに Cisco ACI ファブリックをアップグレードすることもできます。詳細については、次の URL にある『Cisco ACI Virtualization Compatibility Matrix』を参照してください。
アップグレード後のガイドライン
Cisco ACI ファブリックをアップグレードしたら、必要に応じて、アップグレード後の ACI ファブリック コードと同等または下位のバージョンに OpenStack ACI パッケージをアップグレードできます。『OpenStack ACI Plugin Release Notes』で固有の情報も確認してください。
OpenStack ACI プラグインをアップグレードする方法の詳細については、ACI パッケージのアップグレードを参照してください。