この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
ここでは、次のアクションを実行するための最小限の基本的な設定手順について説明します。
この手順では、これらの作業を実行する 1 つの方法を示しますが、それがこれらの作業を実行する唯一の方法というわけではありません。 ここで紹介するのは、新規ユーザを追加し、システム上で機能する電話機をそのユーザに関連付ける簡略な方法です。
これらの手順は、コーリング サーチ スペース、パーティション、およびその他の複雑な設定がすでに行われ、既存のユーザ用に整備されている安定した Cisco Unified Communications Manager システムでの使用を想定しています。
次の各手順では、可能な場合に、例を使って手順を示します。 このような手順例では、サンプルとして次のユーザ情報と電話情報を使用します。
ここでは、Cisco Unified Communications Manager にユーザを追加する手順を説明します。 使用しているオペレーティング システムと、ユーザの追加方法に応じて、この項の手順のいずれかに従ってください。
ユーザを LDAP ディレクトリ(Cisco Unified Communications Server 以外のディレクトリ)に追加した場合は、次の手順に従うことにより、そのディレクトリを、この同じユーザと電話機ユーザを追加している Cisco Unified Communications Manager にただちに同期化できます。
ステップ 1 | Cisco Unified Communications Manager にログインします。 | ||
ステップ 2 | の順に選択します。 | ||
ステップ 3 | [検索(Find)] ボタンを使用して、対象の LDAP ディレクトリを見つけます。 | ||
ステップ 4 | LDAP ディレクトリ名をクリックします。 | ||
ステップ 5 |
[完全同期を今すぐ実施(Perform Full Sync Now)] をクリックします。
|
||
ステップ 6 | 電話機のセットアップに進みます。 |
LDAP ディレクトリを使用していない場合は、次の手順に従って、ユーザを Cisco Unified Communications Manager に直接追加できます。
ステップ 1 | の順に選択します。 |
ステップ 2 |
[新規追加(Add New)] をクリックします。 [エンド ユーザの設定(End User Configuration)] ウィンドウが表示されます。 |
ステップ 3 |
このウィンドウの [ユーザ情報(User Information)] ペインで、次の情報を入力します。
|
ステップ 4 | [保存(Save)] をクリックします。 |
ステップ 5 | 電話機のセットアップの項に進みます。 |
ステップ 1 | Cisco Unified Communications Manager から、 の順に選択します。 | ||
ステップ 2 | [新規追加(Add New)] をクリックします。 | ||
ステップ 3 |
[電話のタイプ(Phone Type)] ドロップダウン リストからユーザの電話機モデルを選択し、[次へ(Next)] をクリックします。 [電話の設定(Phone Configuration)] ウィンドウが表示されます。
|
||
ステップ 4 |
必須フィールドについて、設定できる値は次のとおりです。
|
||
ステップ 5 |
回線を設定します。
|
||
ステップ 6 | エンド ユーザの最終設定手順の実行に進みます。 |
[エンド ユーザの設定(End User Configuration)] ページが表示されていない場合は、 の順に選択して、設定の最後の作業を行います。 [検索(Search)] フィールドと [検索(Find)] ボタンを使用してユーザ(例:John Doe)を見つけた後、ユーザ ID をクリックして、そのユーザの [エンド ユーザの設定(End User Configuration)] ウィンドウを開きます。 [エンド ユーザの設定(End User configuration)] ウィンドウで、次の手順を実行します。