この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
Cisco Unified IP Phone 6901 および 6911 は、インターネット プロトコル(IP)ネットワーク経由の音声通信を提供します。 Cisco Unified IP Phone は、デジタル ビジネス フォンとほぼ同様に機能し、コールの発信および受信に利用できます。 このマニュアルでの Cisco Unified IP Phone には、次の属性があります。
Cisco Unified IP Phone は、他のネットワーク デバイスと同様、設定と管理が必要です。 これらの電話機は、G.711a、G.711u、G.729a、G.729ab、および iLBC コーデックをエンコードし、G.711a、G.711u、G.729、G.729ab、および iLBC コーデックをデコードします。 これらの電話機は、これらのコーデックを同様の方法でエンコードおよびデコードします。
注意 |
セル方式の電話、携帯電話、GSM 電話、または双方向ラジオを Cisco Unified IP Phone のすぐ近くで使用すると、相互干渉が発生することがあります。 詳細については、干渉デバイスの製造元の資料を参照してください。 |
詳細については、『Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager (SCCP and SIP)』を参照してください。
1 |
イーサネット ケーブル用スロット |
4 |
ネットワーク ポート(10/100 SW)接続 IEEE 802.3af 電源対応 |
2 |
ハンドセットの接続 |
5 |
DC アダプタ ポート(DC48V) |
3 |
ハンドセット ケーブル用スロット |
6 |
DC アダプタ ケーブル用スロット |
電話機の受け台には、フックスイッチ ボタンが含まれています。 フックスイッチ ボタンを押してからすばやく放すと、電話機の各機能を有効にすることができます(フックフラッシュ)。
1 |
DC アダプタ ポート(DC48V) |
4 |
ネットワーク ポート(10/100 SW)接続 IEEE 802.3af 電源対応 |
2 |
AC-DC 電源装置(任意) |
5 |
アクセス ポート(10/100 PC)接続 |
3 |
AC 電源コンセント(任意) |
6 |
ハンドセットの接続 |
Cisco Unified IP Phone 6911 には、LCD 画面は搭載されていません。 シスコでは、名前や連絡先の番号を入力するために使用できるペーパー ストリップを提供しています。
電話機をテーブルまたは机の上に置いている場合は、フットスタンドを電話機の背面に取り付けます。表示角度は好みに応じて調整できます。
1 |
コネクタを下のスロットに差し込みます。 |
2 |
コネクタが上のスロットにはまるまでフットスタンドを持ち上げます。 |
|
|
Cisco Unified IP Phone は、音声通信に必要ないくつかの業界標準ネットワーク プロトコルとシスコ ネットワーク プロトコルをサポートしています。 次の表は、 Cisco Unified IP Phone 6901 および 6911 でサポートされているネットワーク プロトコルの概要を示しています。
ネットワーク プロトコル |
目的 |
使用上の注意 |
||
---|---|---|---|---|
Cisco Audio Session Tunneling(CAST) (Cisco Unified IP Phone 6911 のみ) |
CAST プロトコルの利用により、IP Phone とその電話機の背後にある関連アプリケーションは、Cisco Unified Communications Manager やゲートウェイなどの従来のシグナリング コンポーネントに変更を加えることなく、リモート エンドポイントを検出し、通信できます。 CAST プロトコルを利用することにより、別個のハードウェア デバイスで関連するメディアを同期化できます。また、PC アプリケーションでは、PC をビデオ リソースとして使用することにより、ビデオ非対応の電話機がビデオ対応になるように拡張できます。 |
- |
||
Cisco Discovery Protocol(CDP) |
CDP は、シスコの製造するすべての装置で動作するデバイス検出プロトコルです。 CDP を使用することにより、デバイスは自身の存在を他のデバイスにアドバタイズしたり、ネットワーク内の他のデバイスに関する情報を受信したりします。 |
Cisco Unified IP Phone では、補助 VLAN ID、ポートごとの電源管理の詳細情報、Quality of Service(QoS)設定情報などの情報を、CDP を使用して Cisco Catalyst スイッチとやり取りしています。 |
||
ダイナミック ホスト コンフィギュレーション プロトコル(DHCP) |
DHCP は、IP アドレスを動的に確保して、ネットワーク デバイスに割り当てるものです。 DHCP を使用すると、IP Phone をネットワークに接続するだけで、IP アドレスを手動で割り当てたり、追加のネットワーク パラメータを設定したりしなくてもその電話機を機能させることができます。 |
デフォルトでは、電話機の DHCP は有効になっています。 無効にした場合は、個々の電話機がある場所で、IP アドレス、サブネット マスク、ゲートウェイ、および TFTP サーバを手動で設定する必要があります。 シスコでは、DHCP のカスタム オプション 150 を使用することを推奨します。 この方法では、TFTP サーバの IP アドレスをオプション値として設定します。 サポートされているその他の DHCP 設定については、『Cisco Unified Communications Manager System Guide』の「Dynamic Host Configuration Protocol」と「Cisco TFTP」の章を参照してください。
|
||
ハイパーテキスト転送プロトコル(HTTP) |
HTTP は、インターネットや Web 経由で情報を転送し、ドキュメントを移送するための標準的な手段です。 |
Cisco Unified IP Phone では、HTTP をトラブルシューティング用に使用しています。 |
||
IEEE 802.1X |
IEEE 802.1X 標準は、クライアント/サーバベースのアクセス コントロールと認証プロトコルを定義します。これにより、未承認のクライアントが一般にアクセス可能なポートから LAN に接続するのを制限します。 802.1X アクセス コントロールでは、クライアントが認証されるまで、そのクライアントが接続されているポート経由では Extensible Authentication Protocol over LAN(EAPOL)トラフィックしか許可されません。 認証が成功した後は、通常のトラフィックがそのポートを通過します。 |
Cisco Unified IP Phone では、EAP-FAST および EAP-TLS 認証方式をサポートすることによって、IEEE 802.1X 標準が実装されています。 電話機で 802.1X 認証が有効である場合は、ボイス VLAN を無効にします。 詳細については、802.1X 認証を参照してください。 |
||
インターネット プロトコル(IP) |
IP は、パケットの宛先アドレスを指定し、ネットワーク経由で送信するメッセージング プロトコルです。 |
IP を使用して通信するには、ネットワーク デバイスに対して、IP アドレス、サブネット、およびゲートウェイが割り当てられている必要があります。 Cisco Unified IP Phone をダイナミック ホスト コンフィギュレーション プロトコル(DHCP)で使用している場合は、IP アドレス、サブネット、およびゲートウェイが自動的に割り当てられます。 DHCP を使用しない場合は、個々の電話機がある場所で、これらのプロパティを手動で割り当てる必要があります。 Cisco Unified IP Phone は、IPv6 アドレスをサポートしています。 詳細については、『Cisco Unified Communications Manager Features and Services Guide』の「Internet Protocol Version 6 (IPv6)」を参照してください。 |
||
Link Layer Discovery Protocol(LLDP) |
LLDP は、CDP と同様の標準化されたネットワーク検出プロトコルで、一部のシスコ デバイスとサードパーティ製デバイスでサポートされています。 |
Cisco Unified IP Phone 6911 は、スイッチおよび PC ポートで LLDP をサポートしています。 |
||
Link Layer Discovery Protocol-Media Endpoint Devices(LLDP-MED) |
LLDP-MED は、音声製品用に開発された、LLDP 標準の拡張です。 |
Cisco Unified IP Phone は、次のような情報をやり取りするために、SW ポートで LLDP-MED をサポートします。 LLDP-MED サポートの詳細については、次の Web サイトで『LLDP-MED and Cisco Discovery Protocol』ホワイト ペーパーを参照してください。 |
||
リアルタイム転送プロトコル(RTP) |
RTP は、インタラクティブな音声やビデオなどのリアルタイム データをデータ ネットワーク経由で転送するための標準プロトコルです。 |
Cisco Unified IP Phone では、RTP プロトコルを使用して、リアルタイム音声トラフィックを他の電話機やゲートウェイとやり取りします。 |
||
Real-Time Control Protocol(RTCP; リアルタイム制御プロトコル) |
RTCP は RTP と連動して、RTP ストリーム上で QoS データ(ジッター、遅延、ラウンドトリップ遅延など)を伝送します。 |
デフォルトでは、電話機の RTCP は無効になっていますが、Cisco Unified Communications Manager を使用して個々の電話機で有効にすることができます。 |
||
Session Initiation Protocol(SIP) |
SIP は、IP を介したマルチメディア会議のための Internet Engineering Task Force(IETF; インターネット技術特別調査委員会)標準です。 SIP は、アプリケーション層の ASCII ベースの制御プロトコルであり(RFC 3261 で規定)、2 つ以上のエンドポイント間でコールを確立、維持、および終了するために使用できます。 |
他の VoIP プロトコルと同様に、SIP はシグナリングとセッション管理の機能をパケット テレフォニー ネットワークの内部で処理するように設計されています。 シグナリングによって、ネットワーク境界を越えてコール情報を伝送することが可能になります。 セッション管理とは、エンドツーエンド コールの属性を制御する機能を提供することです。 Cisco Unified IP Phone は、SIP または Skinny Client Control Protocol(SCCP)のいずれかを使用するように設定できます。 |
||
Skinny Client Control Protocol(SCCP) |
SCCP は、コール制御サーバとエンドポイント クライアント(IP Phone など)の間で通信を行うためのメッセージング セットを含んでいます。 SCCP は、シスコ独自のものです。 |
Cisco Unified IP Phone 6901 および 6911 では、コール制御に SCCP バージョン 20 を使用します。 |
||
伝送制御プロトコル(TCP) |
TCP は、コネクション型の転送プロトコルです。 |
Cisco Unified IP Phone では、Cisco Unified Communications Manager への接続に TCP を使用します。 |
||
トランスポート レイヤ セキュリティ(TLS) |
TLS は、通信のセキュリティ保護と認証に使用される標準プロトコルです。 |
セキュリティが実装されると、Cisco Unified IP Phone では、Cisco Unified Communications Manager に安全に登録するときに TLS プロトコルが使用されます。 詳細については、『Cisco Unified Communications Manager Security Guide』を参照してください。 |
||
トリビアル ファイル転送プロトコル(TFTP) |
TFTP を使用すると、ファイルをネットワーク経由で転送できます。 Cisco Unified IP Phone で TFTP を使用すると、電話タイプ固有の設定ファイルを取得できます。 |
TFTP では、ネットワーク内に TFTP サーバが必要です。このサーバは、DHCP サーバで自動的に識別できます。 DHCP サーバが指定する以外の TFTP サーバを電話機で使用する場合は、電話機の [ネットワークの設定(Network Configuration)] メニューを使用して、TFTP サーバの IP アドレスを手動で割り当てる必要があります。 詳細については、『Cisco Unified Communications Manager System Guide』の「Cisco TFTP」の章を参照してください。 |
||
ユーザ データグラム プロトコル(UDP) |
UDP は、データ パケットを配信するためのコネクションレス型メッセージング プロトコルです。 |
Cisco Unified IP Phone は、UDP を使用する RTP ストリームを送受信します。 |
Cisco Unified IP Phone は、デジタル ビジネス フォンとほぼ同様に機能し、コールを発信および受信できます。 従来のテレフォニー機能に加えて、 Cisco Unified IP Phone には、電話機をネットワーク デバイスとして管理したりモニタしたりできる機能も含まれています。
Cisco Unified IP Phone は、従来のテレフォニー機能、コール転送、転送、リダイヤル、会議、およびボイス メッセージ システム アクセスを提供します。 Cisco Unified IP Phone では、さらにその他の各種の機能も提供します。 これらの機能の詳細については、『Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager (SCCP and SIP)』を参照してください。
Cisco Unified IP Phone は、他のネットワーク デバイスと同様に、Cisco Unified Communications Manager および IP ネットワークの他の部分にアクセスできるように設定する必要があります。 DHCP を使用すると、電話機上で設定する設定値が少なくなりますが、ネットワークで必要な場合は、IP アドレス、TFTP サーバ、サブネット情報などの情報を手動で設定できます。
最後に、Cisco Unified IP Phone はネットワーク デバイスであるため、詳細なステータス情報を電話機から直接取得できます。 この情報は、ユーザが IP Phone を使用しているときに生じた問題のトラブルシューティングに役立ちます。
Cisco Unified IP Phone の追加の設定値は、Cisco Unified Communications Manager から変更できます。 特に、電話機の登録基準やコーリング サーチ スペースを設定するには、Cisco Unified Communications Manager を使用します。
Cisco Unified Communications Manager の詳細については、Cisco Unified Communications Manager のマニュアル(『Cisco Unified Communications Manager Administration Guide』など)を参照してください。 また、このアプリケーションで参照できる状況依存ヘルプも参考情報として利用できます。
システム管理者は、多くの場合、ネットワーク内や社内の Cisco Unified IP Phone ユーザの主な情報源になります。 機能や手順について確実に最新の情報を伝えるために、Cisco Unified IP Phone の Web サイトにある Cisco Unified IP Phone のマニュアルをよく読んでおいてください。
マニュアルの提供に加えて、ユーザに電話機で有効になっている機能(企業またはネットワークに固有の機能を含む)を通知するようにしてください。 また、必要に応じて、ユーザにこれらの機能にアクセスしたり、カスタマイズしたりする方法も伝えるようにしてください。 社内のサポート Web サイトを使用して、ユーザに常に情報を通知するようにもできます。
Cisco Unified Communications Manager システムでセキュリティを実装すると、電話機や Cisco Unified Communications Manager サーバの ID 盗用、データの改ざん、およびコール シグナリングとメディア ストリームの改ざんを防止できます。
これらの脅威を軽減するために、Cisco IP テレフォニー ネットワークは、電話機とサーバの間で認証および暗号化された通信ストリームを確立して維持し、電話機に転送される前のファイルにデジタル署名し、Cisco Unified IP Phone 間のメディア ストリームおよびコール シグナリングを暗号化します。
Cisco Unified IP Phone 6901 および 6911 は、デバイスがセキュリティ保護、認証、または暗号化の対象になるかどうかを定義している電話セキュリティ プロファイルを使用します。 セキュリティ プロファイルの電話機への適用については、『Cisco Unified Communications Manager Security Guide』を参照してください。
Cisco Unified Communications Manager でセキュリティ関連の設定を行うと、電話機の設定ファイルに機密情報が保存されます。 設定ファイルのプライバシーを確保するには、そのファイルを暗号化用に設定する必要があります。 詳細については、『Cisco Unified Communications Manager Security Guide』の「Configuring Encrypted Phone Configuration Files」の章を参照してください。
次の表に、このマニュアルおよびその他のドキュメントでのセキュリティに関する追加情報の参照先を示します。
トピック |
参照 |
---|---|
Cisco Unified Communications Manager および Cisco Unified IP Phone に関するセットアップ情報、設定情報、およびトラブルシューティング情報を含む、セキュリティの詳細な説明 |
『Troubleshooting Guide for Cisco Unified Communications Manager』および『Cisco Unified Communications Manager Security Guide』 |
Cisco Unified IP Phone でサポートされるセキュリティ機能 |
|
セキュリティ プロファイル名の表示 |
Cisco Unified IP Phone 6901 および 6911 でサポートされるセキュリティ機能の概要については、サポート対象のセキュリティ機能を参照してください。 これらの機能と、Cisco Unified Communications Manager および Cisco Unified IP Phone のセキュリティの詳細については、『Cisco Unified Communications Manager Security Guide』を参照してください。 |
セキュリティが実装されているコールの識別 |
|
TLS 接続 |
|
セキュリティと電話機の起動プロセス |
|
セキュリティと電話機の設定ファイル |
|
電話機の Web ページへのアクセスの無効化 |
|
トラブルシューティング |
|
電話機からの CTL ファイルの削除 |
|
電話機のリセットまたは復元 |
|
Cisco Unified IP Phone の 802.1X 認証 |
次の表は、 Cisco Unified IP Phone 6901 および 6911 でサポートされているセキュリティ機能の概要を示しています。 これらの機能と、Cisco Unified Communications Manager および Cisco Unified IP Phone のセキュリティの詳細については、『Cisco Unified Communications Manager Security Guide』を参照してください。
(注) |
ほとんどのセキュリティ機能は、電話機に証明書信頼リスト(CTL)が含まれている場合にのみ使用できます。 CTL の詳細については、『Cisco Unified Communications Manager Security Guide』の「Configuring the Cisco CTL Client」の章を参照してください。 |
Cisco Unified Communications Manager をサポートしている Cisco Unified IP Phone は、すべてセキュリティ プロファイルを使用します。このプロファイルは、電話機がセキュリティ保護、認証、または暗号化の対象になるかどうかを定義するものです。 セキュリティ プロファイルの設定、およびプロファイルの電話機への適用については、『Cisco Unified Communications Manager Security Guide』を参照してください。
電話機のセキュリティ モードを表示するには、Cisco Unified Communications Manager でセキュリティ プロファイルを表示できます。
コールが認証された場合、そのコールの確立に関与したすべてのデバイスは信頼できるデバイスであり、Cisco Unified Communications Manager によって認証されます。
暗号化されたコールでは、コールの確立に参加しているすべてのデバイスが信頼できるデバイスであり、Cisco Unified Communications Manager によって認証されています。 さらに、コールのシグナリングとメディア ストリームが暗号化されます。 暗号化されたコールはコールの整合性とプライバシーを提供することで、高レベルのセキュリティを提供します。
コールが PSTN などの非 IP コール レッグを介してルーティングされている場合、そのコールは IP ネットワーク内で暗号化されている場合でも非セキュアである可能性があります。
コールが保護された場合、コールの最初にセキュリティ トーンが再生され、他の接続された電話機も暗号化されたオーディオとビデオ(ビデオが関係している場合)を送受信していることを示します。 お使いの電話機が保護されていない電話機に接続されると、セキュリティ トーンは再生されません。
(注) |
2 台の電話機間の接続では、保護されたコールがサポートされます。 電話会議や共有回線などの一部の機能は、保護されたコールが設定されているときは使用できません。 保護されたコールは認証されません。 |
お使いの電話機と相手側の電話機が保護されたコール用に設定されている場合は、保護されたコールが確立されます。 相手側の電話機は、同じ Cisco IP ネットワーク内にあっても、Cisco IP ネットワーク以外のネットワークにあってもかまいません。 保護されたコールは、2 台の電話機の間でのみ確立できます。 会議コールや、複数回線を使用するその他コールでは、保護されたコールはサポートされません。
(注) |
2 台の電話機間の接続では、保護されたコールがサポートされます。 電話会議や共有回線などの一部の機能は、保護されたコールが設定されている場合は使用できません。 |
Cisco Unified Communications Manager は、会議の確立時に電話機のセキュリティ ステータスを確認し、会議のセキュリティ表示を変更するか、またはコールの完了をブロックしてシステム内の整合性とセキュリティを維持します。
次の表は、Cisco Unified IP Phone 6911 の場合の、割り込み使用時のコールのセキュリティ レベルの変更に関する情報を示しています。
発信側の電話機のセキュリティ レベル |
使用される機能 |
コールのセキュリティ レベル |
アクションの結果 |
---|---|---|---|
非セキュア |
cBarge |
暗号化されたコール |
コールは割り込みを受け、非セキュア コールとして識別されます。 |
セキュア(暗号化済み) |
cBarge |
認証済みコール |
コールは割り込みを受け、認証されたコールとして識別されます。 |
セキュア(認証済み) |
cBarge |
暗号化されたコール |
コールは割り込みを受け、認証されたコールとして識別されます。 |
非セキュア |
cBarge |
認証済みコール |
コールは割り込みを受け、非セキュア コールとして識別されます。 |
次の表は、発信側の電話機のセキュリティ レベル、参加者のセキュリティ レベル、およびセキュアな会議ブリッジの可用性に応じた、会議のセキュリティ レベルの変更に関する情報を示しています。
発信側の電話機のセキュリティ レベル |
使用される機能 |
参加者のセキュリティ レベル |
アクションの結果 |
---|---|---|---|
非セキュア |
会議 |
暗号化済みまたは認証済み |
非セキュアな会議ブリッジ 非セキュアな会議 |
セキュア(暗号化済みまたは認証済み) |
会議 |
少なくとも 1 台のメンバーが非セキュア |
非セキュアな会議 |
セキュア(暗号化済み) |
会議 |
すべての参加者が暗号化済み |
セキュアな暗号化レベルの会議 |
セキュア(認証済み) |
会議 |
すべての参加者が暗号化済みまたは認証済み |
認証済みレベルのセキュアな会議 |
非セキュア |
cBarge |
すべての参加者が暗号化済み |
会議が非セキュアに変更されます。 |
非セキュア |
ミートミー |
最小限のセキュリティ レベルが暗号化 |
発信側は、「セキュリティ レベルを満たしていません(Does not meet Security Level)」というメッセージを受信し、コールは拒否されます。 |
セキュア(暗号化済み) |
ミートミー |
最小セキュリティ レベルは、認証済み |
会議は、暗号化済みおよび認証済みのコールを受け入れます。 |
セキュア(暗号化済み) |
ミートミー |
最小限のセキュリティ レベルは非セキュア |
セキュアな会議ブリッジだけが使用可能になり、使用されます。 会議はすべてのコールを受け入れます。 |
Cisco Unified IP Phone と Cisco Catalyst スイッチは、従来 Cisco Discovery Protocol(CDP)を使用して互いを識別し、VLAN 割り当てやインライン所要電力などのパラメータを決定します。 CDP では、ローカルに接続されたワークステーションは識別されません。 Cisco Unified IP Phone は、EAPOL パススルー メカニズムを提供します。 このメカニズムを使用すると、Cisco Unified IP Phone に接続されたワークステーションは、LAN スイッチにある 802.1X オーセンティケータに EAPOL メッセージを渡すことができます。 パススルー メカニズムでは、IP Phone が、ネットワークにアクセスする前にデータ エンドポイントを認証するための LAN スイッチとしては機能しないことが保証されます。
Cisco Unified IP Phone はまた、プロキシ EAPOL ログオフ メカニズムも提供します。 ローカルに接続された PC が IP Phone から切断されても、LAN スイッチと IP Phone の間のリンクは維持されるため、LAN スイッチは物理リンクの障害を認識しません。 ネットワークの完全性が脅かされるのを避けるため、IP 電話はダウンストリーム PC の代わりに EAPOL ログオフ メッセージをスイッチに送ります。これは、LAN スイッチにダウンストリーム PC の認証エントリをクリアさせます。
Cisco Unified IP Phone にはまた、802.1x サプリカントも含まれています。 このサプリカントを使用して、ネットワーク管理者は IP 電話と LAN スイッチ ポートの接続を制御できます。 電話機の 802.1X サプリカントの現行リリースでは、ネットワーク認証に EAP-FAST、EAP-TLS、および EAP-MD5 オプションを使用します。
Cisco Unified IP Phone での 802.1X 認証のサポートには、次のようなコンポーネントが必要です。
(注) |
PC ポートを備えているのは Cisco Unified IP Phone 6911 だけです。 |
新しい IP テレフォニー システムを導入するときは、システム管理者とネットワーク管理者がいくつかの初期設定作業を実施して、ネットワークを IP テレフォニー サービス用に準備する必要があります。 Cisco IP テレフォニー ネットワークおよびそのセットアップと設定のチェックリストについては、『Cisco Unified Communications Manager System Guide』の「System Configuration Overview」の章を参照してください。
Cisco Unified Communications Manager で IP テレフォニー システムをセットアップし、システム全体にわたる機能を設定したら、IP Phone をシステムに追加できます。
電話機を Cisco Unified Communications Manager データベースに追加するには、次の方法を利用できます。
Cisco Unified Communications Manager で電話機を設定する方法の詳細については、次の資料を参照してください。
次に、詳細について説明します。
次の手順は、Cisco Unified Communications Manager の管理ページでの Cisco Unified IP Phone 6901 および 6911 に対する設定タスクの概要を示しています。 この手順は、電話機の設定プロセスを実行するための推奨される順序を示しています。 一部のタスクは、システムおよびユーザのニーズによっては省略できます。 詳細な手順および情報については、この手順に示されている資料を参照してください。
ステップ 1 |
電話機について、次の情報を収集します。
電話機をセットアップするための設定要件のリストを作成します。 詳細については、『Cisco Unified Communications Manager System Guide』の「Cisco Unified IP Phones」の章およびCisco Unified IP Phone で使用可能なテレフォニー機能を参照してください。 |
||||
ステップ 2 | 電話機に対応する十分なユニット ライセンスがあることを確認します。 詳細については、 『Cisco Communications Manager Administration Guide』の「License Unit Report」の章を参照してください。 | ||||
ステップ 3 |
[電話の設定(Phone Configuration)] ウィンドウの必須フィールドに値を入力して、電話機を追加および設定します。 フィールド名の横にあるアスタリスク(*)は、MAC アドレスやデバイス プールなどの必須フィールドを示します。 デフォルト設定値を持つ電話機が Cisco Unified Communications Manager データベースに追加されます。 詳細については、 『Cisco Communications Manager Administration Guide』の「Cisco Unified IP Phone Configuration」の章を参照してください。 [プロダクト固有の設定(Product Specific Configuration)] フィールドについては、[電話の設定(Phone Configuration)] ウィンドウで [?] ボタンのヘルプを参照してください。
|
||||
ステップ 4 |
[電話番号の設定(Directory Number Configuration)] ウィンドウの必須フィールドに値を入力して、電話機に電話番号(回線)を追加し、設定します。 フィールド名の横にあるアスタリスク(*)は、電話番号やプレゼンス グループなどの必須フィールドを示します。 詳細については、『Cisco Unified Communications Manager Administration Guide』の「Directory Number Configuration」の章およびCisco Unified IP Phone で使用可能なテレフォニー機能を参照してください。 |
||||
ステップ 5 |
必須フィールドを設定して、ユーザ情報を追加します。 フィールド名の横にあるアスタリスク(*)は、ユーザ ID や姓などの必須フィールドを示します。
Cisco Unified Communications Manager(Unified CM)のグローバル ディレクトリにユーザ情報を追加します。 詳細については、『Cisco Unified Communications Manager Administration Guide』の「End User Configuration」の章およびCisco Unified Communications Manager へのユーザの追加を参照してください。
|
||||
ステップ 6 |
ユーザをユーザ グループに関連付けます。 ユーザ グループ内のすべてのユーザに適用される、共通のロールと権限のリストをユーザに割り当てます。 管理者は、ユーザ グループ、ロール、および権限を管理することによって、システム ユーザのアクセス レベル(つまり、セキュリティのレベル)を制御できます。
詳細については、『Cisco Unified Communications Manager Administration Guide』の次の項を参照してください。 |
||||
ステップ 7 |
ユーザを電話機に関連付けます。 ユーザが、コールの転送や、短縮ダイヤル番号またはサービスの追加などのアクションのために自分の電話機を制御できるようにします。
詳細については、『Cisco Unified Communications Manager Administration Guide』の「End User Configuration」の章にある「Associating Devices to an End User」を参照してください。 |
電話機を Cisco Unified Communications Manager データベースに追加したら、次は電話機を設置します。 管理者(または電話機のユーザ)は、電話機をユーザの作業場所に設置できます。
(注) |
電話機を設置する前に、現在のファームウェア イメージで電話機をアップグレードします。 アップグレードについては、次の URL にある、お使いの電話機の Readme ファイルを参照してください。 http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240 ファームウェアのアップグレード手順については、次の Web サイトでリリース ノートを参照してください。 http://www.cisco.com/en/US/products/ps10326/prod_release_notes_list.html |
電話機がネットワークに接続されると、電話機の起動プロセスが開始され、電話機が Cisco Unified Communications Manager に登録されます。 電話機の設置を完了するには、DHCP サービスを有効にするかどうかに応じて、電話機上でネットワーク設定値を設定します。
自動登録を使用した場合は、電話機をユーザに関連付ける、ボタン テーブルや電話番号を変更するなど、電話機の特定の設定情報をアップデートする必要があります。
次の手順は、 Cisco Unified IP Phone 6901 および 6911 の設置作業の概要を示しています。 この手順は、電話機の設置を実行するための推奨される順序を示しています。 一部のタスクは、システムおよびユーザのニーズによっては省略できます。 詳細な手順および情報については、この手順に示されている資料を参照してください。
ステップ 1 |
電話機の電源を次の中から選択します。
電話機に電力を供給する方法を決定します。 詳細については、Cisco Unified IP Phone の電源を参照してください。 |
||
ステップ 2 |
電話機を組み立て、電話機の位置を調節し、ネットワーク ケーブルを接続します。 電話機の位置を決めて設置し、ネットワークに接続します。 Cisco Unified IP Phone の設置を参照してください。 フットスタンドを参照してください。 |
||
ステップ 3 |
電話機の起動プロセスをモニタします。 電話番号を電話機に関連付け、電話機が正しく設定されていることを確認します。 電話機の起動確認を参照してください。 |
||
ステップ 4 |
電話上でネットワーク設定値を設定する場合、DHCP を使用するか、手動で IP アドレスを入力して、電話機の IP アドレスを設定します。
詳細については、ネットワーク設定およびCisco Unified IP Phone のネットワーク設定値のセットアップを参照してください。 |
||
ステップ 5 |
電話機のセキュリティをセットアップします。 データ改ざんの脅威と電話機の ID 盗用を防止します。 詳細については、Cisco Unified IP Phone のセキュリティを参照してください。 |
||
ステップ 6 | Cisco Unified IP Phone を使用して、コールを発信します。 電話機および機能が正常に動作することを確認します。 詳細については、『Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager (SCCP and SIP)』を参照してください。 | ||
ステップ 7 |
エンド ユーザに対して、電話機の使用方法および電話機のオプションの設定方法を通知します。 ユーザが十分な情報を得て、Cisco Unified IP Phone を有効に活用できるようにします。 社内のサポート Web サイト を参照してください。 |
Cisco Unified IP Phone 6901 および 6911 は、Cisco EnergyWise(EW)(Power Save Plus とも呼ばれる)をサポートしています。 ネットワークに EnergyWise コントローラが含まれている場合は、消費電力を削減するために、これらの電話機をスケジュールに従ってスリープ(電源オフ)および復帰(電源オン)するように設定できます。
EnergyWise は、電話機ごとに有効または無効に設定します。 EnergyWise を有効にした場合は、他のパラメータと一緒にスリープと復帰の時刻を設定します。 これらのパラメータは、電話機の設定ファイルの一部として電話機に送信されます。
次の表は、次のドキュメントで使用されている用語の重要な違いのいくつかを示しています。
ユーザ ガイド |
アドミニストレーション ガイドおよびシステム ガイド |
---|---|
自動割り込み |
cBarge |
メッセージ インジケータ |
メッセージ受信インジケータ(MWI)またはメッセージ受信ランプ |
ボイスメール システム |
ボイス メッセージ システム |