Cisco IP 会議用電話のセットアップ
自動登録が有効ではなく、電話機が Cisco Unified Communications Manager データベースに存在しない場合、Cisco Unified Communications Manager の管理で手動で Cisco IP 電話を設定する必要があります。 この手順の一部のタスクは、システムおよびユーザのニーズによっては省略できます。
この手順の詳細については、ご使用の Cisco Unified Communications Manager リリースのマニュアルを参照してください。
Cisco Unified Communications Manager の管理ページを使用して、次の手順で設定を実行してください。
手順
ステップ 1 |
電話機について、次の情報を収集します。
詳細については、ご使用の Cisco Unified Communications Manager リリースのマニュアルおよび関連リンクを参照してください。 |
||
ステップ 2 |
電話機に対応する十分なユニット ライセンスがあることを確認します。 詳細については、ご使用の Cisco Unified Communications Manager リリースのライセンス マニュアルを参照してください。 |
||
ステップ 3 |
デバイス プールを定義します。 を選択します。デバイス プールは、デバイスに共通の特性(リージョン、日時グループ、ソフトキー テンプレートなど)を定義します。 |
||
ステップ 4 |
共通の電話プロファイルを定義します。 の順に選択します。共通の電話プロファイルは Cisco TFTP サーバが要求するデータとともに、サイレント オプションおよび機能制御オプションなど、共通の電話の設定を提供します。 |
||
ステップ 5 |
コーリング サーチ スペースを定義します。 Cisco Unified Communications Manager の管理ページで、 をクリックします。コーリング サーチ スペースは、着信番号のルーティング方法を決定するために検索されるパーティションのコレクションです。 デバイス用のコーリング サーチ スペースと電話番号用のコーリング サーチ スペースは併用することができます。 電話番号の CSS は、デバイスの CSS に優先します。 |
||
ステップ 6 |
デバイス タイプおよびプロトコルのセキュリティ プロファイルを設定します。 を選択します。 |
||
ステップ 7 |
電話機をセット アップします。 の順に選択します。 |
||
ステップ 8 |
を選択して、SIP パラメータを設定します。 |
||
ステップ 9 |
を選択し、[電話番号の設定(Directory Number Configuration)] ウィンドウの必須フィールドに値を入力して、電話機に電話番号(回線)を設定します。 電話番号の詳細については、ご使用の Cisco Unified Communications Manager リリースのマニュアルおよび関連リンクを参照してください。 |
||
ステップ 10 |
(任意) ユーザを電話機に関連付けます。 設定されている回線にユーザを関連付けるには、[電話の設定(Phone Configuration)] ウィンドウの下部にある [エンド ユーザの関連付け(Associate End Users)]をクリックします。 |
||
ステップ 11 |
(任意) ユーザをデバイスに関連付けます。 |
||
ステップ 12 |
ソフトキー テンプレートをカスタマイズします。 の順に選択します。このページを使用して、ユーザの電話機に表示されるソフトキー機能を追加、削除、または順序変更し、機能の利用ニーズに対応します。 会議電話には特殊なソフト キー要件があります。 詳細については、関連リンクを参照してください。 |
||
ステップ 13 |
Cisco IP 電話サービスを設定し、サービスを割り当てます。 の順に選択します。電話機に IP 電話サービスを提供します。
|
||
ステップ 14 |
(任意) Cisco Unified Communications Manager のグローバルディレクトリにユーザ情報を追加します。 を選択し、[新規追加(Add New)]をクリックして、必須のフィールドを設定します。 必須のフィールドにはアスタリスク(*)が付いています。
|
||
ステップ 15 |
(任意) ユーザ グループにユーザを関連付けます。 の順に選択します。ユーザ グループ内のすべてのユーザに適用される、共通のロールと権限のリストをユーザに割り当てます。 管理者は、ユーザ グループ、ロール、および権限を管理することによって、システム ユーザのアクセス レベル(つまり、セキュリティのレベル)を制御できます。 エンド ユーザが Cisco Unified Communications セルフケアポータルにアクセスするには、ユーザを標準の Cisco Communications Manager エンド ユーザ グループに追加する必要があります。 |