アクセスの設定
|
無効
[有効(Enabled)]
[制限(Restricted)]
|
[有効(Enabled)]
|
設定アプリのローカル設定へのアクセスを有効化、無効化、または制限します。
制限(Restricted)モードでは、[設定(Preferences)] および [システム情報(System Information)] メニューにアクセスできます。 Wi-Fi メニューの一部の設定にもアクセスできます。
アクセスを無効にしている場合、[Settings] メニューにオプションが表示されません。
|
Gratuitous ARP
|
無効
[有効(Enabled)]
|
無効
|
電話機が Gratuitous ARP から MAC アドレスを学習する能力を有効または無効にします。 この機能は、音声ストリームをモニタまたは記録するために必要です。
|
Web アクセス(Web Access)
|
無効
[有効(Enabled)]
|
無効
|
Web ブラウザによる電話 Web ページへのアクセスを有効または無効にします。
注意
|
このフィールドを有効にすると、電話機に関する機密情報が公開される場合があります。
|
|
Webアクセス用のTLS 1.0およびTLS 1.1を無効にする
|
無効
[有効(Enabled)]
|
[有効(Enabled)]
|
Web サーバ接続に TLS 1.2 の使用を制御します。
|
一括ダイヤル
|
無効
[有効(Enabled)]
|
無効
|
ダイヤル方法を制御します。
-
[無効(Disabled)]:ダイヤルプランまたはルートパターンの重複がある場合、Cisco Unified Communications Manager は桁間タイマーが満了するのを待ちます。
-
[有効(Enabled)]:ダイヤルが完了すると、ダイヤルされた文字列全体が Cisco Unified Communications Manager に送信されます。 T.302 タイマーのタイムアウトを回避するために、ダイヤルプランまたはルートパターンが重複している場合は常に一括ダイヤルを有効にすることをお勧めします。
強制承認コード(FAC)またはクライアント識別コード(CMC)は一括ダイヤルに対応していません。 FAC または CMC を使用して通話アクセスとアカウンティングを管理している場合は、この機能を使用できません。
|
Days Backlight Not Active
|
Days of the week
|
|
[バックライト点灯時刻(Backlight On Time)] フィールドで指定された時刻になっても、バックライトを自動的にオンにしない日を定義します。
ドロップダウン リストから単一または複数の曜日を選択します。 複数の曜日を選択するには、Ctrl キーを押しながら目的の各曜日をクリックします。
Cisco IP 電話 での省電力のスケジュールを参照してください。
|
Backlight On Time
|
hh:mm
|
|
毎日バックライトを自動的にオンにする時刻([バックライト表示非点灯(Backlight Display Not Active)] フィールドで指定されている日を除く)を定義します。
このフィールドには、24 時間形式で入力します(0:00 は午前 0 時)。
たとえば、午前 7 時(0700)にバックライトを自動的にオンにするには、 7:00 と入力します。 午後 2:00 時(1400)にバックライトをオンにするには、 (1400)にバックライトをオンにするには、14:00 と入力します。
このフィールドがブランクの場合、バックライトは午前 0 時に自動的にオンになります。
Cisco IP 電話 での省電力のスケジュールを参照してください。
|
Backlight On Duration
|
hh:mm
|
|
[バックライト点灯時刻(Backlight On Time)] フィールドで指定した時刻にバックライトがオンになった後、オン状態を保つ時間の長さを定義します。
たとえば、バックライトを自動的にオンにしてから 4 時間 30 分にわたってオン状態を保つには、04:30 と入力します。
このフィールドがブランクの場合、電話機は午前 0 時(0:00)にオフになります。
[バックライト点灯時刻(Backlight On Time)] が 0:00 で、バックライト点灯継続時間がブランク(または 24:00)の場合、バックライトはオフになりません。
Cisco IP 電話 での省電力のスケジュールを参照してください。
|
Backlight Idle Timeout
|
hh:mm
|
|
バックライトをオフにするまでの電話機のアイドル時間を定義します。 バックライトがスケジュールどおりにオフで、ユーザが(電話機ボタンを押す、またはハンドセットを持ち上げる操作で)オンにした場合にのみ適用されます。
たとえば、ユーザがバックライトをオンにしてから 1 時間 30 分にわたって電話機がアイドル状態にあった場合にバックライトをオフにするには、01:30 と入力します。
Cisco IP 電話 での省電力のスケジュールを参照してください。
|
Backlight On When Incoming Call
|
無効
[有効(Enabled)]
|
[有効(Enabled)]
|
着信コールがあるとバックライトがオンに変わります。
|
Enable Power Save Plus
|
Days of the week
|
|
電話機の電源をオフにする日のスケジュールを定義します。
ドロップダウン リストから単一または複数の曜日を選択します。 複数の曜日を選択するには、Ctrl キーを押しながら目的の各曜日をクリックします。
[Power Save Plus の有効化(Enable Power Save Plus)] がオンになっていると、緊急(e911)の問題について警告するメッセージを受け取ります。
注意
|
Power Save Plus モード(「モード」)が有効である間は、モードに設定されたエンドポイントは、緊急コールでは無効で、着信コールの受信ができません。 このモードを選択することにより、次の条項に同意したものと見なされます。(i)モードが有効である間、緊急コールとコールの受信用の代替方法を責任を持って用意する必要があります。(ii)シスコはこのモードの選択に関して何の責任を負いません。このモードを有効にすることは、お客様の責任で行っていただきます。(iii)コール、発信、およびその他について、このモードを有効にした場合の影響をユーザにすべて通知する必要があります。
|
Power Save Plus を無効にするには、[EnergyWise オーバーライドを許可(Allow EnergyWise Overrides)] チェックボックスをオフにする必要があります。 [Power Save Plus の有効化(Enable
Power Save Plus)] フィールドで、日数を選択しないまま [EnergyWise オーバーライドを許可(Allow EnergyWise Overrides)] チェックボックスをオンにしたままにしておくと、Power Save
Plus は無効になりません。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
電話機をオンにする時刻(Phone On Time)
|
hh:mm
|
|
[Power Save Plus の有効化(Enable Power Save Plus)] フィールドにある日について、電話機の電源を自動的にオンにする時刻を決定します。
このフィールドには、24 時間形式で入力します(0:00 は午前 0 時)。
たとえば、午前 7 時(0700)に自動的に電話機の電源をオンにする場合は、 7:00 と入力します。 午後 2 時(1400)に電話機の電源をオンにするには、 (1400)にバックライトをオンにするには、14:00 と入力します。
デフォルト値はブランクで、これは 00:00 を意味します。
[電話機をオンにする時刻(Phone On Time)] は、[電話機をオフにする時刻(Phone Off Time)] より 20 分以上遅い時刻に設定する必要があります。 たとえば、[電話機をオフにする時刻(Phone Off Time)]
が 7:00 の場合、[電話機をオンにする時刻(Phone On Time)] は 7:20 より前に設定しないでください。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
電話機をオフにする時刻(Phone Off Time)
|
hh:mm
|
|
[Power Save Plus の有効化(Enable Power Save Plus)] フィールドで選択した日について、電話機の電源をオフにする時刻を定義します。 [電話機をオンにする時刻(Phone On Time)] フィールドと [電話機をオフにする時刻(Phone
Off Time)] フィールドに同じ値が含まれている場合、電話機はオフになりません。
このフィールドには、24 時間形式で入力します(0:00 は午前 0 時)。
たとえば、午前 7 時(0700)に自動的に電話機の電源をオフにする場合は、 7:00 と入力します。 午後 2 時(1400)に電話機の電源をオフにするには、 (1400)にバックライトをオンにするには、14:00 と入力します。
デフォルト値はブランクで、これは 00:00 を意味します。
[電話機をオンにする時刻(Phone On Time)] は、[電話機をオフにする時刻(Phone Off Time)] より 20 分以上遅い時刻に設定する必要があります。 たとえば、[電話機をオフにする時刻(Phone Off Time)]
が 7:00 の場合、[電話機をオンにする時刻(Phone On Time)] は 7:20 より前に設定しないでください。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
Phone Off Idle Timeout
|
hh:mm
|
|
電話機の電源をオフにする前に、電話機をアイドル状態にしておく必要がある時間の長さを示します。
タイムアウトは次の条件で発生します。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
Enable Audible Alert
|
チェックボックス
|
オフ
|
これを有効にすると、[電話機をオフにする時刻(Phone Off Time)] で指定した時刻の 10 分前に電話機で音声アラートの再生が開始されます。
このチェックボックスが表示されるのは、[Power Save Plus の有効化(Enable Power Save Plus)] リストボックスで 1 日以上が選択されている場合だけです。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
EnergyWise Domain
|
最大 127 文字です。
|
|
その電話機が含まれる EnergyWise ドメインを特定します。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
EnergyWise シークレット
|
最大 127 文字です。
|
|
EnergyWise ドメイン内でエンドポイントとの通信に使用されるセキュリティの秘密パスワードを指定します。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
Allow EnergyWise Overrides
|
チェックボックス
|
オフ
|
電話機に電源レベルの更新を送信するための EnergyWise ドメイン コントローラのポリシーを許可するかどうかを決定します。 次の条件が適用されます。
たとえば、[電話機をオフにする時刻(Phone Off Time)] が 22:00(午後 10 時)に設定されていると仮定すると、[電話機をオンにする時刻(Phone On Time)] フィールドの値は 06:00(午前 6 時)となり、[Power
Save Plus の有効化(Enable Power Save Plus)] では 1 日以上が選択されています。
-
EnergyWise が 20:00(午後 8 時)に電話機をオフにするように指示すると、この指示は、午前 6 時に設定された [電話機をオンにする時刻(Phone On Time)] まで有効となります(電話機ユーザによる介入が発生しないと仮定した場合)。
-
午前 6 時になると、電話機はオンとなり、Cisco Unified Communications Manager の管理での設定から電力レベルの変更の受信を再開します。
-
電力レベルを電話機で再び変更するには、EnergyWise は電力レベル変更コマンドを新たに再発行する必要があります。
Power Save Plus を無効にするには、[EnergyWise オーバーライドを許可(Allow EnergyWise Overrides)] チェックボックスをオフにする必要があります。 [Power Save Plus の有効化(Enable
Power Save Plus)] フィールドで、日数を選択しないまま [EnergyWise オーバーライドを許可(Allow EnergyWise Overrides)] チェックボックスをオンにしたままにしておくと、Power Save
Plus は無効になりません。
Cisco IP 電話 での EnergyWise のスケジュールを参照してください。
|
Join And Direct Transfer Policy
|
[同一回線で有効(Same line enable)]
[同一回線で無効(Same line disable)]
|
[同一回線、回線全体で有効(Same line, across line enable)]
|
コールに参加し、転送するユーザの機能を制御します。
|
録音トーン
|
無効
[有効(Enabled)]
|
無効
|
ユーザがコールを記録する際のトーンの再生を制御します
|
録音トーンのローカルボリューム
|
整数 0 ~ 100
|
100
|
ローカル ユーザに対する録音トーンのボリュームを制御します。
|
録音トーンのリモート音量
|
整数 0 ~ 100
|
50
|
リモート ユーザに対する録音トーンのボリュームを制御します。
|
録音トーンの長さ
|
整数、1 ~ 3000 ミリ秒
|
|
録音トーンの長さを制御します。
|
ログサーバー
|
256 文字以下の文字列。
|
|
電話デバッグ出力用の IPv4 syslog サーバを指定します。
アドレスの形式: address:<port>@@base=<0-7>;pfs=<0-1>
|
リモート ログ(Remote Log)
|
無効
[有効(Enabled)]
|
無効
|
Syslog サーバにログを送信する機能を制御します。
|
ログプロファイル
|
デフォルト
プリセット
テレフォニー
SIP
UI
ネットワーク
Media
アップグレード
アクセサリ
セキュリティ
EnergyWise
MobileRemoteAccess
|
プリセット
|
事前定義されたロギング プロファイルを指定します。
-
[デフォルト(Default)]:デフォルトのデバッグ ロギング レベル
-
[プリセット(Preset)]:電話ローカル デバッグ ロギングの設定を上書きしません
-
[テレフォニー(Telephony)]:電話またはコール機能に関する情報をログに記録します
-
[SIP]:SIP シグナリングに関する情報をログに記録します
-
[UI]:電話ユーザ インターフェイスに関する情報をログに記録します
-
[ネットワーク(Network)]:ネットワーク情報をログに記録します
-
[メディア(Media)]:メディア情報をログに記録します
-
[アップグレード(Upgrade)]:アップグレード情報をログに記録します
-
[アクセサリ(Accessory)]:アクセサリ情報をログに記録します
-
[セキュリティ(Security)]:セキュリティ情報をログに記録します
-
[Energywise]:省エネルギー情報をログに記録します
-
[MobileRemoteAccess]:Expressway によるモバイルおよび Remote Access の情報をログに記録します。
|
IPv6 ログサーバー
|
256 文字以下の文字列。
|
|
電話デバッグ出力用の IPv6 syslog サーバを指定します。
|
Cisco Discovery Protocol(CDP):Switch Port
|
無効
[有効(Enabled)]
|
[有効(Enabled)]
|
電話機の Cisco Discovery Protocol を制御します。
|
Link Layer Discovery Protocol - Media Endpoint Discover(LLDP-MED):スイッチ ポート(Link Layer Discovery Protocol - Media Endpoint
Discover(LLDP-MED): Switch Port)
|
無効
[有効(Enabled)]
|
[有効(Enabled)]
|
SW ポートで LLDP-MED を有効にします。
|
LLDP Asset ID
|
32 文字以下の文字列。
|
|
在庫管理のため電話機に割り当てられているアセット ID を識別します。
|
Energy Efficient Ethernet(EEE):スイッチ ポート
|
無効
[有効(Enabled)]
|
無効
|
スイッチ ポート上の EEE を制御します。
|
LLDP 電力の優先順位(LLDP Power Priority)
|
不明
低
高
クリティカル(Critical)
|
不明
|
電話機の電源優先度をスイッチに割り当て、スイッチが電力を適切に電話機に供給できるようにします。
|
802.1X 認証
|
ユーザ制御(User Controlled)
無効
[有効(Enabled)]
|
ユーザ制御(User Controlled)
|
802.1x 認証機能のステータスを指定します。
-
[ユーザ制御(User Controlled)]:ユーザは電話機に 802.1x を設定できます。
-
無効(Disabled):802.1x 認証は使用されません。
-
[有効(Enabled)]:802.1x 認証が使用され、電話の認証を設定します。
|
Switch Port Remote Configuration
|
無効
Auto Negotiate
10 ハーフ(100 Half)
10 フル(10 Full)
100 ハーフ(100 Half)
100 フル(10 Full)
|
無効
|
電話機 SW ポートの速度とデュプレックス機能のリモート設定ができます。 これにより、具体的なポート設定を伴う大規模な導入のパフォーマンスが向上します。
Cisco Unified Communications Manager のリモート ポート設定用に SW ポートが設定されている場合は、電話機のデータを変更することはできません。
|
SSH アクセス
|
無効
[有効(Enabled)]
|
無効
|
ポート 22 を経由する SSH デーモンへのアクセスを制御します。ポート 22 を開いたままにしておくと、電話機はサービス拒否(DoS)攻撃を受けやすい状態となります。
|
呼出音ロケール(Ring Locale)
|
デフォルト
日本
|
デフォルト
|
呼出音パターンを制御します。
|
TLS 再開タイマー
|
整数、0 ~ 3600 秒
|
3600
|
TLS 認証プロセス全体を繰り返すことなく TLS セッションを再開する機能を制御します。 このフィールドが 0 に設定されている場合、TLS セッション再開は無効です。
|
FIPS モード
|
無効
[有効(Enabled)]
|
無効
|
電話機上で連邦情報処理標準(FIPS)モードを有効または無効にします。
|
共有電話からの通話履歴を記録(Record Call Log from Shared Line)
|
無効
[有効(Enabled)]
|
無効
|
共有電話からの通話履歴を記録するかどうかを指定します。
|
呼出音の最小音量(Minimum Ring Volume)
|
0:サイレント
1–15
|
0:サイレント
|
電話機の最小呼出音量を制御します。
|
ピア ファームウェア共有(Peer Firmware Sharing)
|
無効
[有効(Enabled)]
|
[有効(Enabled)]
|
電話機がサブネット上にある同一モデルの他の電話機を検出し、更新されたファームウェア ファイルを共有できるようにします。 電話機に新しいファームウェア ロードがある場合、他の電話機とそのロードを共有できます。 他の電話機の 1 つに新しいファームウェア
ロードがある場合、TFTP サーバからではなくその電話機からファームウェアをダウンロードできます。
ピア ファームウェア共有により、以下が実現します。
-
中央集中型リモート TFTP サーバへの TFTP 転送における輻輳が制限されます。
-
ファームウェアのアップグレードを手動で制御する必要がなくなります。
-
アップグレード時に多数のデバイスが同時にリセットされた場合の電話機のダウンタイムが削減されます。
-
帯域幅が制限された WAN リンクを経由するブランチまたはリモート オフィス導入シナリオでのファームウェアのアップグレードに役立ちます。
|
ロード サーバ
|
256 文字以下の文字列。
|
|
電話機がファームウェア ロードとアップグレードを取得するために使用する代替 IPv4 サーバを指定します。
|
IPv6 負荷サーバ(IPv6 Load Server)
|
256 文字以下の文字列。
|
|
電話機がファームウェア ロードやアップグレードを取得する際に使用する代替 IPv6 サーバを指定します。
|
Unified CM接続障害の検出
|
標準
[遅延(Delayed)]
|
標準
|
バックアップ Unified CM/SRST へのデバイスのフェールオーバーが発生する前の最初のステップである、Cisco Unified Communications Manager(Unified CM)への接続失敗を検出するための電話機の感度を決定します。
有効な値は、[Normal](標準のシステム レートで Unified CM 接続エラーの検出を実行)または [Delayed](標準より約 4 倍遅いレートで Unified CM 接続エラーの検出を実行)です。
Unified CM 接続エラーの高速認識のためには、[Normal] を選択します。 接続を再確立できるようにするためにフェールオーバーを少し遅らせる場合は、[Delayed] を選択します。
[Normal] と [Delayed] の接続エラー検出の正確な時間の差は、常に変化する多数の変数に応じて異なります。
|
Special Requirement ID
|
文字列
|
|
Engineering Special(ES)ロードからのカスタム機能を制御します。
|
HTTPS サーバ(HTTPS Server)
|
http および https 対応
https のみ
|
http および https 対応
|
電話機への通信のタイプを制御します。 [HTTPS のみ(HTTPS only)] を選択すると、電話通信がよりセキュアになります。
|
Expressway サインインに対するユーザ クレデンシャルの永続性(User Credentials Persistent for Expressway Sign In)
|
無効
[有効(Enabled)]
|
無効
|
電話機にユーザのサインイン クレデンシャルを保存するかどうかを制御します。 無効にすると、ユーザに対して、モバイルおよび Remote Access(MRA)の Expressway サーバにサインインするためのプロンプトが常に表示されます。
ユーザが簡単にログインできることが望ましい場合は、このフィールドを有効にすることによって、Expressway のログイン クレデンシャルを永続的なものとすることができます。 ユーザは初回のみログイン クレデンシャルを入力する必要があります。
それ以降は(オフプレミスで電話機の電源を入れたとき)、常にログイン情報がサインイン画面に事前入力されます。
詳細については、Expressway サインイン用ユーザ クレデンシャル パーシステントの設定を参照してください。
|
カスタマー サポートのアップロード URL(Customer support upload URL)
|
256 文字以下の文字列。
|
|
問題レポート ツール(PRT)の URL を入力します。
Expressway 経由でのモバイルおよび Remote Accessを使用してデバイスを導入している場合、Expressway サーバの HTTP サーバ許可リストへの PRT サーバ アドレスの追加も必要となります。
詳細については、Expressway サインイン用ユーザ クレデンシャル パーシステントの設定を参照してください。
|
TLS暗号を無効にする
|
トランスポート層セキュリティ暗号を無効にするを参照してください。
|
None
|
選択した TLS 暗号を無効にします。
複数の暗号スイートを無効にするには、コンピュータのキーボードでCtrlキーを押したままにします。
|
コール パーク専用の 1 回線
|
無効
[有効(Enabled)]
|
[有効(Enabled)]
|
パークされたコールが 1 回線を占有するかどうかを制御します。
詳細については、Cisco Unified Communications Manager のマニュアルを参照してください。
|