この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
マルチギガビット イーサネット(mGig)、N-BASET、802.11bz はすべて、CAT-5e などの既存のインフラストラクチャの配線を使用して高速化(1 G を超える)を実現できる方式です。目標は既存のケーブル構造を置き換えずに企業内で最大 5 倍の高速化を提供することです。
(注) |
AP 2800 は直接 mGig をサポートしていませんが、これらは AP 2800 でも必要な電力を供給するための最適なスイッチです。 |
理想的には、IEEE 802.3bz(mGig。N-BASET とも呼ばれる)をサポートするスイッチは、CAT-5 などの古いケーブル システムを使用して最高速のイーサネットを提供し、最近の PoE デバイスに対して +30W を提供します。
ケーブル配線構成と Cisco マルチギガビット イーサネットについては次の関係があります。
最大 1 G のデータ レートでは 62.5 MHz 帯域幅が必要です(Cat 5e は 100 MHz)。
最大 2.5 G のデータ レートでは 100 MHz 帯域幅が必要です(Cat 5e は 100 MHz)。
最大 5 G のデータ レートでは 200 MHz 帯域幅が必要です。これは規定されている Cat 5e 100 MHz 帯域幅を超えますが、Cat 6 ケーブルの範囲内です。
主な要点は、Cat 5e 上の 5 G 運用では、Cat 5e ケーブルを仕様の範囲外で使用するため、特定のケーブル構成を使用する場合に問題が発生する可能性があるということです。
*バンドル、つまり複数のケーブルが同じパイプ中にある場合の混線問題に注意してください。高密度ケーブル バンドルを使用する場合は Cat-5e を 30 ~ 50 m 以下に保ちます。たとえば、パイプなどの高密度のエリアにあるケーブルや 5 本以上のケーブルをバンドルに束ねる場合が該当します。