- Using Ethernet Operations Administration and Maintenance
- Configuring Ethernet Connectivity Fault Management in a Service Provider Network
- CFM CCM Extensions to Support the NSN Microwave 1+1 Hot Standby Protocol
- Configuring Ethernet CFM for the Cisco ASR 1000 Router
- Configuring Ethernet Virtual Connections on the Cisco ASR 1000 Series Router
- Ethernet Performance Monitoring on Untagged EFPs
- Using the IEEE 802.3ad Link Aggregation MIB
- Configuring IEEE 802.3ad Link Bundling
- ITU-T Y.1731 Performance Monitoring in a Service Provider Network
- ITU-T G.8032 Ethernet Ring Protection Switching
- Enabling Ethernet Local Management Interface
- Layer 2 Access Control Lists on EVCs
- Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
- Configuring Ethernet Local Management Interface at a Provider Edge
- Using Link Layer Discovery Protocol in Multivendor Networks
- Multichassis LACP
- ICCP Multichassis VLAN Redundancy
- MC-LAG TCN Interworking
- Configuring ITU-T Y.1731 Fault Management Functions in IEEE CFM
- G.8032 and CFM Support for Microwave Adaptive Bandwidth
- Configuring IP SLAs Metro-Ethernet 3.0 (ITU-T Y.1731) Operations
- IPSLA Y1731 On-Demand and Concurrent Operations
- VXLAN-MCLAG Active-Active High Availability Support
- VxLAN Support
Carrier Ethernet Configuration Guide, Cisco IOS XE Release 3S
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- November 6, 2012
Feedback