QoS Modular QoS Command-Line Interface Configuration Guide, Cisco IOS Release 12.2SX

The Cisco software feature documentation in this configuration guide oftenincludes information about features that are shared across software releasesand platforms. This guide may contain information that is not specific toyour particular platform or is not supported in your software release.Additionally, some configuration guides contain content that may besuperseded by documentation from a later software release.

For the latest feature information and caveats, see the release notes foryour platform and software release. Additionally, use Cisco Feature Navigatorto find information about feature, platform, and software image support. Toaccess Cisco Feature Navigator, go to http://www.cisco.com/go/cfn.

Any Internet Protocol (IP) addresses and phone numbers used in thisdocument are not intended to be actual addresses and phone numbers. Anyexamples, command display output, network topology diagrams, and otherfigures included in the document are shown for illustrative purposes only.Any use of actual IP addresses or phone numbers in illustrative content isunintentional and coincidental.

Recommended Reading:

• About Cisco IOS SoftwareDocumentation
• Using the Command-LineInterface in Cisco IOS Software
• Cisco IOS Quality of Service Solutions Command Reference

Browse all support information for Cisco IOSRelease 12.2 SX, or selectanother product.

Complete book-level PDFs are generated periodically and therefore may notreflect the latest updates to documentation as contained in the chapter-levelHTML or PDF documents.