hw-module satellite reload
To reload and perform a soft reset of individual slots of the satellite device, use the hw-module satellite reload command in the EXEC mode.
hw-module satellite { satellite id | all } reload
Syntax Description
satellite id |
Specifies the unique identifier of the satellite device on which reload has to be performed. |
all |
Performs the reload operation on all the currently active satellites. |
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
Release | Modification |
---|---|
Release 4.3.1 |
This command was introduced. |
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID | Operation |
---|---|
ethernet-services |
read, write |
Examples
This example shows a sample output of the hw-module satellite reload command:
RP/0/RP0/CPU0:router # hw-module satellite 101 reload
Reload operation completed successfully.
RP/0/RSP0/CPU0:May 3 20:26:51.883 : invmgr[254]: %PLATFORM-INV-6-OIROUT : OIR: Node 101
removed