IOT-OD (IoT Operations Dashboard) is the cloud management portal, and the device is connected to the online cloud through
the internet. In offline mode the device is configured in local mode by CLI and web UI, and it is not connected to the cloud.
When the device is configured in offline mode, the user can choose following options.
-
configure the device manually using CLI and web UI.
-
configure the device on IOTOD cloud service and select the configuration file exported from IOD-OD industrial wireless and
upload the configuration file by using upload configuration button at the end of IOT-IW management page.
To activate or deactivate IOTOD-IW (IOT Industrial Wireless) configuration capability, use the following CLI command.Device# configure iotod-iw {offline | online}
online - set up IOTOD IW mode to online. The device can be managed from the IOTOD IW cloud server (if it is connected to the
Internet).
offline - set up IOTOD IW mode to offline. (The device is disconnected from IOTOD-IW and must be manually configured using
the CLI, or its offline Configurator interface.)