Cisco Routingprozessoren und Route-Switch-Prozessoren
| Überblick | Produktübersicht |
|---|---|
| Status | Verfügbar Bestellung aus Serie |
| Veröffentlichungsdatum der Serie | Pre-1999 |
Feedback-
- Cisco Supervisor Engine 32 der Serie 7600 mit Multilayer Switch Feature Card
Status: Verfügbar | Veröffentlichungsdatum: 01-Feb-2003
-
Beste Suchergebnisse
Wichtigen Informationen
Kunden haben auch Folgendes angezeigt
Gespeicherte Inhalte
-
Sie können jetzt Dokumente für den Schnellzugriff und zur späteren Verwendung speichern. Gespeicherte Dokumente für dieses Produkt werden hier aufgelistet. Besuchen Sie die Seite „My Saved Content“ (Meine gespeicherten Inhalte), um alle gespeicherten Inhalte von Cisco.com anzuzeigen und zu managen.
Melden Sie sich an, um Ihre gespeicherten Inhalte anzuzeigen.
Neueste Sicherheitshinweise
- 28-Aug-2024
- 06-Aug-2024
- 21-Jun-2024
- 10-Jan-2024
- 05-Oct-2023
Dokumentkategorien
-
Datenblätter und Produktinformationen
- Cisco Route Processor Module XF
- Cisco 2-Port Gigabit Ethernet OC-12 Packet-over-SONET Backcards
Datenblätter
- EOS & EOL Cisco 1-Port Gigabit Ethernet and 1-Port OC-12 Packet
End-of-Life and End-of-Sale Notices
-
Sicherheitshinweise
- Field Notice: FN74184 - New SSD Component Introduction in NCS560 May Cause FPD Upgrade Failures on Cisco IOS XR Software Releases Earlier Than 7.6.1 - Software Upgrade Recommended
- Field Notice: FN74154 - Some A900-PWR1200-A Power Supply Units on Cisco Network Convergence System 560 Series Routers May Become Unresponsive After FPD Upgrade with Specific Cisco IOS XR Releases - Software Upgrade Recommended
- Field Notice: FN74148 - PAK and RTU Licenses Cannot Be Converted to Smart Licenses When Doing Direct (Long-Jump) Upgrades from Cisco IOS XE Software Release 17.3 or Earlier to Release 17.11 or Later - Workaround Provided
- Field Notice: FN72510 - Cisco IOS XE Software: Weak Cryptographic Algorithms Are Not Allowed by Default for IPsec Configuration in Certain Cisco IOS XE Software Releases - Configuration Change Recommended
- Field Notice: FN72323 - Cisco IOS XE Software: QuoVadis Root CA 2 Decommission Might Affect Smart Licensing, Smart Call Home, and Other Functionality - Software Upgrade Recommended
- Field Notice: FN72578 - Cisco IOS XE - Smart Licensing Using Policy Might Cause High CPU/Memory Usage - Software Upgrade Recommended
- Field Notice: FN - 72509 - Weak cryptographic algorithms are not allowed for SNMP user configuration after IOS XE 17.11.1a release - Configuration Change Recommended
- Field Notice: FN - 72570 - Weak Cryptographic Algorithms Are Not Allowed by Default for OSPF IPsec Configuration in Cisco IOS XE Release 17.11.1 and Later - Configuration Change Recommended
- Field Notice: FN - 72511 - RSA Keys Less Than 2048 Bits Are Not Supported for SSH in Cisco IOS XE Release 17.11.1 and Later - Workaround Provided
- Field Notice: FN - 72294 - PAK Licenses Will Not Be Supported on ASR 903/902/907/914 Routers with Cisco IOS XE Release 17.7.x and Later - Software Upgrade Recommended
- Field Notice: FN - 70605 - Some NCS 560 RSP4 Might Fail to Boot After FPD Upgrade - Workaround Provided
- Field Notice: FN - 72105 - SUDI Certificate Expires When Registered to a PKI and Used to Configure Certain Functionalities on Cisco IOS and IOS XE Platforms - Workaround Provided
- Field Notice: FN - 70464 - ASR 900/NCS 4200 with RSP2 and ASR 920/NCS 4201/4202 Products Do Not Support Software Version Rollback from Certain Cisco IOS XE Versions - Workaround Provided
- Field Notice: FN - 64191 - Catalyst 3850/3650 Switches That Run Cisco IOS XE Releases 3.6.5E/3.7.4E or Earlier Might Exhibit High CPU Usage - Workaround Provided
- Field Notice: FN - 64153 - ASR1000 - Inaccurate Power Supply Unit Status - Software Upgrade Recommended
Problemhinweise
-
Fehlerbehebung
-
Cisco ASR 900 Route-Switch-Prozessor (RSP)
-
Cisco Catalyst 5000 Route Switch-Modul (RSM)
-
Cisco 7600 Supervisor Engine 32 mit Multilayer Switch Feature Card
Technische Hinweise zur Fehlerbehebung
-
-
Literatur
- The Road to Cisco Infinite Broadband (PDF - 3 MB)
White Papers
-
Melden Sie sich an, um die verfügbaren Downloads anzuzeigen.
-
-
Sofern nicht anders angegeben, gilt die Dokumentation für die Cisco Route Processors und Route Switch Processors für alle Modelle.
Nachfolgend sind die Modelle dieser Serie aufgeführt:
- Route Switch Processor 720 der Serie 7600 mit 1 Gigabit Ethernet-Uplinks
- Route Switch Processor 720 der Serie 7600 mit 10 Gigabit Ethernet-Uplinks
- Route Switch Processor 720 der Serie 7600 mit Multilayer Switch Feature Card
- Supervisor Engine 32 der Serie 7600 mit Multilayer Switch Feature Card
- Supervisor Engine 720 der Serie 7600 mit Multilayer Switch Feature Card
- 8800 Routingprozessor
- 10000 Performance Routing Engine 2 (PRE2)
- 10000 Performance Routing Engine 3 (PRE3)
- 10000 Performance Routing Engine 4 (PRE4)
- 10000 Performance Routing Engine 5 (PRE5)
- 12000 Performance Routingprozessor-Engine
- Route Switch Processor 2 (RSP2) des ASR 900
- Route Switch Processor 3 (RSP3) des ASR 900
- Route Switch Processor (RSP) ASR 900
- Routingprozessor der Serie ASR 1000 (RP1)
- Routingprozessor der Serie ASR 1000 (RP2)
- Routingprozessor der Serie ASR 1000 (RP3)
- Catalyst 5000 Route Switch Feature Card (RSFC)
- Catalyst 5000 Route Switch Module (RSM)
- Routingprozessormodul der Serie MGX 8800/8900
- MGX Routingprozessormodul PR
- NCS 420X Route Switch-Prozessor 128
- NCS 420X Route Switch Processor 400
- NCS 560 Route Switch Processor 4 (RSP4)
- NCS 560 Route Switch Processor 4-E (RSP4-E)
- NCS 4216 Route Switch-Prozessor
- Route Switch Prozessor 4
- Route Switch-Prozessor 8
- Route Switch-Prozessor 16
- XR 12000 Performance Route Processor-3
- XR 12000/Cisco 12000 Serie - Performance Route Processor-2
- CCAP 8x10G Physical Interface Card der cBR-Serie
- CCAP 160G Supervisor der cBR-Serie
- uBR10012 Performance Routing Engine 5
