Upgrade Firmware using Cisco Business Mobile App

Available Languages

Download Options

  • PDF     (756.6 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (742.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (377.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:June 25, 2021
Document ID:1624575089644225

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

kmgmt3029-Upgrade-Firmware-Cisco-Business-Mobile-app

Objective

The objective of this document is to show you how to upgrade the firmware of Cisco Business devices in your network using the Cisco Business Mobile app.

Introduction

The Cisco Business Mobile app enables you to deploy and manage supported Cisco Business switches and wireless access points in your network from a mobile device.  

Using the Cisco Business Mobile app, you can easily upgrade the firmware of your Cisco Business devices.

To find out more, keep reading!

Applicable Software | Version

System Requirements for Cisco Business Mobile app

The Cisco Business Mobile app is supported on Apple iOS-based devices running iOS version 13.0 and above.

The following Cisco Business devices can be managed by the Cisco Business Mobile app:

  • Cisco Business 220 Series Smart Switches
  • Cisco Business 250 Series Smart Switches
  • Cisco Business 350 Series Managed Switches
  • Cisco Business 100 Series Access Points
  • Cisco Business 100 Series Mesh Extenders
  • Cisco Business 200 Series Access Points

Upgrade Firmware

It is recommended to upgrade the firmware during off hours to avoid any disruption to your work.

Step 1

Open the Cisco Business Mobile app.

Click on the Cisco Business Mobile App.

Step 2

Select Network Devices.

Select Network Devices.

Step 3

Choose the device you would like to upgrade firmware. In this example, CBS350 switch is selected.

Choose the device you would like to upgrade firmware.

Step 4

(Optional) To view the current firmware version of the device, click the More button.

To view the current firmware version of the device, click the More button.

The current software version will be listed in the Device Information section.

The current software version will be listed in the Device Information section.

Step 5

To upgrade firmware, select the Actions button.

Select the Actions button.

Step 6

Click Upgrade firmware.

Click Upgrade firmware

Step 7

Click Upgrade.

Click Upgrade.

Step 8

Click Confirm to proceed.

Click Confirm to proceed.

The upgrade process will take a few minutes.

The upgrade process will take a few minutes.

Step 9

Once the upgrade process has been completed, you will see a notification. Click Done.

Click Done.

Conclusion

It is that simple and easy! Enjoy high performance of your network with all devices updated to the latest firmware using the Cisco Business Mobile app.

Looking for more articles on the Cisco Business Mobile application? Look no further! Click any of the tags below to be brought directly to that topic. Enjoy!

Revision History

Revision Publish Date Comments
1.0
25-Jun-2021
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products