Reboot SPA100 Series through the Web Based Configuration Utility

Available Languages

Download Options

  • PDF     (19.6 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (63.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (88.8 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2732

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Reboot SPA100 Series through the Web Based Configuration Utility

Objective

A reboot or restart of the device is made if certain settings of the device have been changed or the device has stopped working properly.  A reboot of the device is necessary for some of the new configurations made on the device to take effect or to refresh all the application and services. A periodic reboot is recommended for optimal performance. The objective of this document is to reboot the SPA100 Series Analog Telephone Adapters (ATA) through the web based configuration utility of the device.

Applicable Devices

• SPA100 Series Phone Adapters

Software Version

• v1.1.0

Reboot Procedure

Step 1. Log in to the web configuration utility and choose Administration > Reboot. The Reboot page opens:

Note: All services associated will be restarted during a reboot. It is highly recommended to save any current work before a reboot to prevent any loss of data.

Step 2. Click the Reboot button to restart the ATA and all services. A warning message appears.

Step 3. Click OK to reboot the ATA when the warning message appears. The administrator is taken back to login page.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco