Limitations and Restrictions in Cisco Smart PHY 3.1.x
Cisco Smart PHY 3.1.5, 3.14, and 3.1.3
The following limitations and restrictions are found in Cisco Smart PHY 3.1.4 and Cisco Smart PHY 3.1.3:
-
Upgrading from Cisco Smart PHY 3.1.2 to Cisco Smart PHY 3.1.3 is not available. Deployment of Cisco Smart PHY 3.1.5, 3.1.4, or 3.1.3 requires fresh installation.
-
RPD provisioning operations intended for Cisco cBR-8 routers which exhibit high CPU utilization may cause configuration push errors. In this scenario, retry the provisioning operation after the CPU utilization on the Cisco cBR-8 router decreases.
-
The Cisco Smart PHY user interface may show slow response when Smart PHY orchestrates 20000 RPDs.