Commands: o through t

over-temp-shutdown

To disable the feature of shutting down the card when the temperature is too high, use the over-temp-shutdown command in global configuration mode. To restore the feature, use the no form of the command.

over-temp-shutdown disable

no over-temp-shutdown

Command Default

None.

Command Modes

Global configuration mode (config) (FCC and Primary eRPD)

Command History

Release

Modification

Cisco Remote PHY Shelf 7200 Software 1.1

This command was introduced on the Cisco Remote PHY Shelf 7200.

Usage Guidelines

Use the over-temp-shutdown command to disable the over-temperature shut down.

Examples

The following example shows how to disable the over-temperature shut down: 

HA-Shelf-FCC# configure terminal
HA-Shelf-FCC(config)# over-temp-shutdown disable

select

To connect to eRPD, RPD linecard, or RPD linecard console, use the select command in privileged EXEC mode.

select {console-linecard slot | slot_id | | | erpd slot | slot_id | index | index_id | | | linecard slot | slot_id }

Syntax Description

console-linecard

Connect to a specific RPD line card console.

Note 

Available in FCC command mode only.
erpd

Connect to a specific eRPD.

linecard

Connect to a specific RPD line card.

Command Default

None.

Command Modes

Privileged EXEC (#) (FCC, Line Card, and Primary eRPD)

Command History

Release

Modification

Cisco Remote PHY Shelf 7200 Software 1.1

This command was introduced on the Cisco Remote PHY Shelf 7200.

Usage Guidelines

Use the select command to connect eRPD, RPD linecard, or RPD linecard console.

Examples

The following example shows how to connect to RPD line card: 

HA-Shelf-FCC# select linecard slot 1

trunk

To configure the eRPD trunk mode, use the trunk command in global configuration mode. To disable the eRPD trunk mode, us the no form of the command.

trunk vlan vlan_index slot slot_index erpd erpd_index

no trunk vlan

Command Default

None.

Command Modes

Global configuration mode (config) (FCC and Primary eRPD)

Command History

Release

Modification

Cisco Remote PHY Shelf 7200 Software 1.1

This command was introduced on the Cisco Remote PHY Shelf 7200.

Usage Guidelines

Use the trunk command to configure the eRPD trunk mode.

Examples

The following example shows how to configure the eRPD trunk mode: 

HA-Shelf-FCC# configure terminal
HA-Shelf-FCC(config)# trunk vlan 2 slot 0 erpd 1