The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes open severity 1 and 2 caveats and select severity 3 caveats.
The Open Caveats section lists open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.
The bug IDs are sorted alphanumerically.
 Note |
The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug Search Tool. |
Use the Cisco Bug Search Tool to access open and resolved bugs for a release.
The tool allows you to search for a specific bug ID, or for all bugs specific to a product and a release.
You can filter the search results by last modified date, bug status (open, resolved), severity, rating, and support cases.
|
Caveat ID Number |
Description |
|---|---|
|
RPHY: Interleaves are not support for Annex B |
|
Caveat ID Number |
Description |
|---|---|
|
allocated channels number 0 in show cable rpd alloc-chan-resources |
|
|
Dummy info in show cable rpd identification or version |
|
|
RPD cannot be online after double failure until a reset |
|
|
RPD SSD download fail due to Cannot allocate memory |
|
|
1RU shelf: small rate downstream packets drop in low or high temperature |
|
|
cnir for upstream of the second port can't show out when configure two controllers in one rpd |
|
|
OFDM power is changed after mute and no-mute the channel |
|
|
Pilot tone power level can not be adjusted in expected range |
|
|
power-adjust doesn't work if configure base-power later than power-adjust in cable RPD |
|
|
Re-config the QAM channel will impact the existing Pilot channel setting |
|
|
RPD may take long time to be operational |
|
|
RPHY: Modem become p-online or not be seen after delete/add ds controller for RPD |
|
|
RPHY: modem p-online after change the RPD ds controller profile |
|
Caveat ID Number |
Description |
|---|---|
|
rpd stuck at init(clock) |
|
|
RPD SSD download fail due to Cannot allocate memory |
|
|
Dummy info in show cable rpd identification or version |
|
|
D31:RxMER is wrong when modem online |
|
|
RPD grouping take long time to choose primary |
|
|
Failed to IPv6 SSD from RPD side |
|
|
RPHY: Support for pre-equalization and ingress noise cancellation on RPD |
|
|
RPHY: modem p-online after change the RPD ds controller profile |
|
|
Should not print out system file path msg after SSH login to RPD |
|
|
1RU shelf: small rate downstream packets drop in low or high temperature |
|
|
RPD may take long time to be operational |
|
|
OFDM power is changed after mute and no-mute the channel |
|
|
Re-config the QAM channel will impact the existing Pilot channel setting |
|
|
traffic loss erratically when no and add back the OOB profile |
|
|
RPD cannot be online after double failure until a reset |
|
|
RPHY: after cBR changed equalization and inc_enable, show cli can not update on node side. |
|
|
RPHY - RPD does not come online when using Interleaver depth > 1 |
|
|
RPHY: interop l2tp session id duplicated when multiple SCQAM and OFDM channels |
|
|
RPD stuck and not keep rebooting |
|
|
Pilot tone power level can not be adjusted in expected range |
There are no resolved caveats in this release.
Feedback