System Requirements
These sections describe the system requirements for Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases:
Memory Requirements for Cisco 1x2 / Compact Shelf RPD Software 4.2.2
![]() Note |
Memory is not configurable for the Cisco Remote-PHY device. |
Feature Set |
Cisco RPHY Processor |
Software Image |
Fixed Memory |
Runs From |
---|---|---|---|---|
CISCO RPHY 4.2.2 |
NXP LS1043A |
RPD-V4-2-2.itb.SSA |
1G Bytes |
Bootflash: |
Hardware Supported
For detailed information about the hardware supported in Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Determining the Software Version for Cisco 1x2 / Compact Shelf RPD Software 4.2.2
To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote-PHY Device, log in and enter the show version EXEC command:
R-PHY#show version
Cisco RPD Software, version v4.2.2, build by rpd-release, on 2018-07-26 04:59:25
Branch information:
RPD branch: (detached from RPD_V4_2_20180725)
OpenRPD branch: (detached from RPD_V4_2_20180725)
SeresRPD branch: (detached from RPD_V4_2_20180725)
![]() Note |
System image file name for a factory installed image is /bootflash/RPD-V4.2.2_hardware_certificate.itb.rel.sign.SSA. System image file name for a Secure Software Download(SSD) from the Cisco software download page is /bootflash/RPD-V4-2-2.itb.SSA.act. |