System Requirements
These sections describe the system requirements for Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases:
Memory Requirements for Cisco 1x2 / Compact Shelf RPD Software 5.4.2
![]() Note |
Memory is not configurable for the Cisco Remote PHY device. |
Feature Set |
Cisco RPHY Processor |
Software Image |
Fixed Memory |
Runs From |
---|---|---|---|---|
CISCO RPHY 5.4.2 |
NXP LS1043A |
RPD-V5-4-2.itb.SSA |
1G Bytes |
Bootflash: |
Hardware Supported
For detailed information about the hardware supported in Cisco 1x2 / Compact Shelf RPD Software and its maintenance releases, see:
http://www.cisco.com/c/en/us/td/docs/cable/cbr/installation/guide/b_cbr_how_and_what_to_order.html.
Determining the Software Version of Cisco 1x2 / Compact Shelf RPD Software 5.4.2
To determine the version of the Cisco 1x2 RPD software running on your Cisco Remote PHY Device, log in and enter the show version EXEC command:
R-PHY#show version
Cisco RPD Software, version v5.4.2, build by rpd-release, on 2018-12-18 20:07:24
Branch information:
RPD branch: (detached from RPD_V5_4_2_20181219)
OpenRPD branch: (detached from RPD_V5_4_2_20181219)
SeresRPD branch: (detached from RPD_V5_4_2_20181219)
![]() Note |
The system image file name of the factory installed image is /bootflash/RPD-V5.4.2_hardware_certificate.itb.rel.sign.SSA. The system image file name of the Secure Software Download (SSD) from the Cisco software download page is /bootflash/RPD-V5-4-2.itb.SSA.act. |