The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This section describes open and resolved severity 1 and 2 caveats and select severity 3 caveats:
Cisco Bug Search Tool (BST), the online successor to Bug Toolkit, is designed to improve effectiveness in network risk management and device troubleshooting. You can search for bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. For more details on the tool, see the help page located at http://www.cisco.com/web/applicat/cbsshelp/help.html .
There are no open caveats for Cisco IOS-XE Release 3.5.9SQ.
|
Caveat ID Number |
Description |
|---|---|
|
RFGW-10 Sup 7-E Active SUP crashes due to corruption of the lbg routes. |
|
|
4K Macroblocking issue when process fast input SPTS |
|
|
ifOutOctets for Qam channel displaying Bandwidth instead of output packets |
|
|
Active supervisor crash when standby supervisor is hung |
There are no open caveats for Cisco IOS-XE Release 3.5.8SQ.
|
Caveat ID Number |
Description |
|---|---|
|
No socket for the specified port# message when registering endpoints |
|
|
YAP: sh platform software monitor all asserts |
|
|
Mismatch System returned to ROM Time |
|
|
SQC : TFTP copy doesn't follow ip source-interface via Fa1 |
|
|
GUI: Opening tabs in new window gives Admin privilege to Guest User |
|
|
Slogs from video module needs to be throttled |
|
|
Machine check exception handling failed |
|
|
RFGW-10 Sup Moka CRC Causes Slot 3-10 Linecard Restarts |
|
|
When the 14 # TCC card is active, the Alarm LED will turn off |
|
|
"Bundle Session" field header is missing in show gqi statistics CLI command |
|
|
show CLI modification to display multicast group IP |
|
Caveat ID Number |
Description |
|---|---|
|
RFGW-10 Sup Moka CRC Causes Slot 3-10 Linecard Restarts. |
|
Caveat ID Number |
Description |
|---|---|
|
Adding set and clear alarm message when power supply detects low voltages |
|
|
Disable TCC switchover when there is no DTI connection |
|
|
DS-384:bb_video crash observed while copying PMT |
|
|
PCR PID missing on output when PCR is incoming on separate PID |
|
|
Pixelization on video observed on some Set Top box |
|
|
RFGW10: Rate Limit error messages LC_ERRMSG_VIDEO_UNKNOWN_PROG_NUM Snoop: IN 555, prog 2 |
|
|
SUP CLI to disable ignorable PSI err msg notifications |
|
|
Tier-based encryption error |
|
Caveat |
Description |
|---|---|
|
Pixelization on video observed on some Set Top box |
|
Caveat ID Number |
Description |
|---|---|
|
4500 switch running IOS-XE crashes after show version running |
|
|
Cisco IOS and IOS XE Software Cluster Management Protocol Remote Code Execution Vulnerability |
|
Caveat |
Description |
|---|---|
|
Standby SUP crashes when defaulting Video & QAM configurations |
|
|
IOSXE-2-PLATFORM: Active SUP reloads due to cli_agent crash |
|
|
Show CLI not displaying depi session end points |
|
Caveat ID Number |
Description |
|---|---|
|
Annex C-256 QAMS bandwidth NOT working more than 33 Mbps |
|
|
CLI to enable/disable RLD qdepth and QAM oversubscription events for DEPI |
|
|
used_bw shows -ve value during oversubscription with PMT change |
|
|
RF Switch Card removal causes TCC crash |
|
|
Optimising SteelHead 'Rx Buffer Underflow' event handling to avoid service outage |
|
|
RFGW-10 PCR drift causing loss of audio on some subscriber channels |
|
|
RFGW-3-BULK_DNLD failure observed with Kernel Dumper configuration |
|
Caveat |
Description |
|---|---|
|
Standby SUP gets reset when defaulting QAM, video labels, and load balancing group routes. |
|
|
Active Supervisor card fails, but the standby Supervisor card takes over the process. |
|
Caveat |
Description |
|---|---|
|
After running data traffic for several hours, when trying to synchronize configuration, a router processor (RP) switch-over may reload the new standby RP. |
|
|
LC Crash with SH Watchdog Expired Error |
|
|
On line cards where powerkey encryption is enforced, when running longevity with VOD and SDV churn, error messages similar to the following appear: Requested PID could not be allocated. |
|
|
Active Supervisor Engine crashes when creating ACL for Downstream External PHY Interface (DEPI) route. |
|
|
Active Supervisor Engine fails because of memory corruption. |
|
|
The Switch or the Syslog server does not show any alert or warning messages, when the output voltage of the power supply is zero. |
|
|
Set-top box shows black screen and the following error messages appear in logs because of some configuration changes in the LQAM ID numbers. %RFGW-3-LINECARD_ERRMSG_ERR: SLOT 7:LC_ERRMSG_VIDEO_PROG_NUM_IN_USE: OUT 4, QAM 73, prog 62351 %RFGW-3-LINECARD_ERRMSG_ERR: SLOT 7:LC_ERRMSG_VIDEO_PSI_BLOCKED Out PAT: id 4, error File exists |
|
|
SNMP traps are not delivered when the output voltage of the power supply is zero. |
|
|
Active Supervisor card fails over to the standby Supervisor. |
|
|
When a line card boots up, the IPC buffer allocated for video process is depleted. |
|
|
Line card fails and automatically recovers because of QNX Kernel exception handling. |
|
|
The quality of 4K videos is affected due to macro blocking when streamer server delivers 4K program with fast clock. |
|
|
The DS384 Line card resets with the following error message because of a UPX RF power level that was out of spec: LC_ERRMSG_FAILOVER_TRIGGER UPX |
|
|
SUP CLI implementation for disabling MPEG compliance. |
|
|
TCC card fails to boot up with this error message TCC_ERRMSG_GEN_UCPC_SAME_AS_OCPC and it causes other LC to be not operational. This issue will be seen only during an image upgrade. |
|
|
Video line card fails when you shut unshut video src in simulcrypt sessions. |
|
Caveat |
Description |
|---|---|
|
LCHA reports,RFGW_MCAST:Unable to delete,txint(slot=7, gige=5) not found |
|
|
%IOSXE-2-PLATFORM: process ng_dumper: Process cli_agent |
|
Caveat |
Description |
|---|---|
|
Active SUP crashes due to lcc_send_depi_stats_msg() |
|
|
bb_video LC crash is seen after 12 hours SDV and VOD churn |
|
|
CEM communication through loopback as mgmt ip |
|
|
DS384 line card crash due to P4080 Qam channel Mutex lock not released |
|
|
Dualcrypt : VOD freeze on VSRM Failover for first Crypto Period |
|
|
ECMG connectivity issue when Tenx/9 is in L2 mode |
|
|
Handling Missing SUP Switchover interrupt in DS384 LC. |
|
|
Kernel core not generated during one Crash trigger instance |
|
|
Macro blocking issue seen on Table Based VOD . |
|
|
RFGW-10 does not support ifOutOctet for video qam |
|
|
RFGW-10 DS384 Intermittent VoD Black Screen |
|
|
RFGW-10 Management F1 not pingable after SUP switchover. |
|
|
RFGW-10: CLI for feature, Fail to Clear Duration |
|
|
RFGW-10: encrypted Video freeze after LC Switchover |
|
|
SQA3: Observing Sup crash after resetting LC followed by reloading peer |
|
|
TACACS encrypts usermane |
|
|
TCC Card crash causes SUP to hang |
|
|
To fix ONID configuration discrepancy between VSRM & RFGW10 |
|
|
When doing switchover from slot 12 back, DEPI sessions are stuck |
|
|
LC stuck in INIT state on active SUP failover |
|
|
IPC leaks in Linecards causing mbuffer depletion leading LC's to reset |
|
|
DS384: Stby LC DVB conform , not sync with Primary LC |
|
Caveat |
Description |
|---|---|
|
When doing switchover from slot 12 back, DEPI sessions are stuck |
|
|
DS-384 card crash due to bb_depi launch too many times (1) |
|
|
RFGW-10 Management F1 not pingable after SUP switchover |
|
Caveat |
Description |
|---|---|
|
POODLE protocol-side fix: HTTPS Client |
|
|
RFGW10 - 3.3.1 XPP Error causes loss of forwarding plane no SUP failover |
|
|
Crash at TFTP server |
|
|
RFGW10 DS-384 keeps crashing when connected with remote switch or 3gspa |
|
|
DS-384 crash - process bb_video launch too many times |
|
|
RFGW-10 DS-384 crash command packet channel mismatch and seq number error |
|
|
RFGW-10 DS-384 cpld_align_fifo_underflow did not cause a failover |
|
|
MF: flowmgr_pre_flow_processing failed 248 message when turn on service |
|
|
Recover for VFE IM portVlanDirectParityError/portVlanHashParityError |
|
|
RFGW-3-UNEXPECTED: STANDBY:RFGW_MCAST: Unable to delete |
|
|
DS-384 LC reboots with bb_root.core and io_pkt_v4.core during LC bootup |
|
|
LC 12 was disabled and not loading until standby SUP reloaded |
|
|
tcc_dti_stats crash occurred while executing ‘show cable clock’ |
|
|
DS48 LC failed due to yellowfin fatal error |
|
|
RFGW10 - process_video_session_summary - process bb_video launch |
|
|
DATACORRUPTION-1-DATAINCONSISTENCY when polling ceExtSysBootImageList |
|
|
Interfaces in running config out of order after DS384 failover |
|
|
D6 Protocol crashes on receiving an unsupported messages from NMS server |
|
|
%Error: Unable to change partition binding |
|
|
DS384 - Losing heartbeats after executing ‘ipc_debug_show_queue_summary’ |
|
|
Private section without syntax was not updated |
|
|
UPX High priority event (SET): RF Power Level out of spec |
|
|
SQD01: bb_video launch on config stream having table 0 & 1 in PMT PID |
|
|
Memory allocation Failure in ERRP DB |
|
Caveat |
Description |
|---|---|
|
CPUHOG: Task is running for (2024)msecs, more than (2000)msecs (0/0) |
|
|
Multiple server ip's and same ip octet display issue. |
|
Caveat |
Description |
|---|---|
|
DEPI: duplicate depi sessions being created. |
|
|
After GQI churn, DVB scrambling encrypt type is not displayed. |
Feedback