Secure Client Communications for Cisco DCNM Servers
This section describes how to configure HTTPS on Cisco Data Center Network Manager Servers.
Note |
You must enable SSL/HTTPS on the Cisco DCNM before you add a CA signed SSL certificate. Therefore, perform the procedure in the below mentioned order. |
This section includes the following topics:
Enabling SSL/HTTPS on Cisco DCNM in HA Environment on Virtual Appliance
To enable SSL/HTTPS on a Virtual Appliance for Cisco DCNM in HA mode, perform the following:
Procedure
Step 1 |
Configure the primary server with a self signed SSL certificate.
|
||
Step 2 |
On the secondary server, locate the keystore. |
||
Step 3 |
Rename the keystore located at <DCNM_install_root>/dcm/wildfly-10.1.0.Final/standalone/configuration/fmserver.jks to <DCNM_install_root>/dcm/wildfly-10.1.0.Final/standalone/configuration/fmserver.jks.old |
||
Step 4 |
Copy the file fmserver.jks generated in primary server to secondary server into folders <dcnm-home> /dcm/wildfly-10.1.0.Final/standalone/configuration/ <dcnm-home>/dcm/fm/conf/cert/ |