Cisco Nexus 3550-T NX-OS Multicast Routing Configuration Guide, Release 10.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 18, 2022

New and Changed Information

This section contains the new and changed information for a release.

New and Changed Information

Table 1. New and Changed Information for Cisco Nexus 3550-T NX-OS Release 10.2(x)
Feature	Description	Changed in Release	Where Documented
Multicast Support Enhancements	Support for single configured PIM-enabled VLAN with Layer 3 egress multicast capability.	10.2(3v)	Configuring Layer 3 Multicast Receiver VLAN
Layer 3 Multicast Enhancements	Support for multicast is available on Layer 3 ports or access ports.	10.2(3t)	Guidelines and Limitations for Multicast
PIM	FHR support for PIM-sparse mode. Support for static RP. Support for ip pim jp-policy policy-name command.	10.2(3t)	About PIM Guidelines and Limitations for Rendezvous Points Configuring Message Filtering
IGMP Snooping	Support for new IGMP query flood parameter.	10.2(3t)	Configuring Global IGMP Snooping Parameters
PIM-SM	Support for Multicast ACLs for RP.	10.2(3t)	Information about PIM Allow RP

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)