Cisco Nexus 3550 FDK User Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: October 21, 2021

Chapter: Introduction

Introduction

Introduction

Introduction

This documentation contains information for programming with the Firmware Development Kits (FDK) for the Cisco Nexus SmartNICs range of network cards and Cisco Nexus 3550-F Fusion platform.

If you're looking for information about the FDK for our network cards, for example the Cisco Nexus SmartNIC K35-S (formerly X10) and Cisco Nexus SmartNIC+ V5P, please see the Cisco Nexus SmartNIC documentation page.

We have a dedicated section for our SmartNIC FDK Expansion Pack (FDK-XP) which includes the Accelerated TCP Engine (ATE), please see here for information.

If you're looking for information about the FDK for our Cisco Nexus 3550-F Fusion platform, please see the Cisco Nexus 3550-F FDK page.

Should you notice that one of these pages contains outdated or incomplete information, please don't hesitate to open a case with Cisco TAC.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)