New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
| Nexus to interpret 802.1Q DEI bit and define configurable knob to set DEI Bit to zero | Added support for Drop Eligible Indicator (DEI) that indicates the frames eligible to be dropped in the presence of a congestion. | 10.2(3)F | Drop Eligible Indicator |
|
Two level timers and counters for errdisable linkflap |
Added support for link-flap error-disable count configuration on all physical ports. |
10.2(3)F |
|
|
The link debounce time command support |
Added new platforms and ports supported for link debounce time command. |
10.2(3)F |
|
|
Disable or enable USB Ports |
USB Ports on Supervisor Cards can be disabled or enabled |
10.2(1)F |
|
|
DWDM |
Configuring DWDM |
10.2(1)F |
|
|
Enable/disable ‘lacp suspend-individual’ without port-channel ‘shutdown’ |
The [no] lacp suspend-individual configuration is allowed on port-channels which are in admin up state. This feature is supported on all Cisco Nexus 9000 platform switches. |
10.2(1)F |
|
|
MH-BFD over VXLAN |
Added support for Nexus 9200, 9364C, 9300-EX, 9300-FX/FX2, 9300-GX, 9300-FX3, 9700-EX/FX, X9716D-GX, 9600-R and 9600-RX family switches. |
10.2(1)F |
|
|
LACP Enhancement - PXE |
Allows only one port-channel member in Individual (I) state for both regular port-channels and across vPC peers, for PXE boot. This feature is supported on all Cisco Nexus 9000 platform switches. |
10.2(1)F |
Disabling LACP Suspend Individual PXE |
|
BFD session increase to 2048 |
Support 2048 BFD sessions on Cisco Nexus 9300-EX, 9300-FX, 9300-FX2, 9300-FX3, and 9300-GX platform switches. |
10.2(1)F |
|
|
Layer 2 (L2) |
Added support for Layer 2 (L2) interfaces on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
Guidelines and Limitations for Layer 2 Interfaces |
|
Layer 3 (L3) |
Added support for Layer 3 (L3) interfaces on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
Guidelines and Limitations for Layer 3 Interfaces |
Feedback