Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 10.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 16, 2021

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 10.2(x).

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 10.2(x) and tells you where they are documented.


Feature	Description	Changed in Release	Where Documented
Destination NAT and PAT	Added section for destination NAT and PAT	10.2(2)F	Destination NAT and PAT
ITD NAT and ITD over VXLAN	Added support for ITD over VXLAN and ITD NAT on Cisco N9K-C9332D-GX2B platform switches.	10.2(1q)F	Guidelines and Limitations for ITD
ITD NAT Statistics	Added support to ITD NAT statistics.	10.2(1)F	Guidelines and Limitations for ITD Verifying the ITD Layer-3 Configuration
PBR on Port-channel subinterface	Added support for policy-based routing with Layer 3 port-channel ingress subinterfaces.	10.2(1)F	Guidelines and Limitations for ITD

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)