New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
IGMPv3 supports SSM |
Added SSM support for IGMPv3. |
10.2(2)F |
|
|
Unicast to Multicast NAT |
Unicast to Multicast NAT works in ingress translation mode. The multicast translated packet can be egress translated back to multicast. The destination address of the unicast packet should match the NAT service reflection interface. |
10.2(2)F |
|
|
Multicast NLB |
Added support for Multicast NLB on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
Guidelines and Limitations for NLB |
|
Multicast NAT |
Added support for Multicast NAT on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
|
|
Multicast GRE |
Added support for Multicast GRE on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
Guidelines and Limitations for PIM and PIM6 |
|
MLD Snooping |
Added support for MLD Snooping on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
Guidelines and Limitations for MLD |
|
IGMP Host Proxy |
Added support for IGMP host proxy on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
|
|
Layer 2 and Layer 3 Multicast |
Added support for Layer 2 and Layer 3 Multicast on Cisco N9K-C9332D-GX2B platform switches. |
10.2(1q)F |
|
|
Multicast Flow Path Visibility for TRM Flows |
Added support for TRM L3 mode and underlay multicast. |
10.2(1)F |
|
|
Multicast NAT: Multicast-to-Unicast |
Added Multicast-to-Unicast NAT translation support in egress mode. |
10.2(1)F |
|
|
Global Boundary Multicast Configuration |
Disables multicast protocol actions and traffic forwarding for unauthorized groups or channels for all interfaces on a router. |
10.2(1)F |
Feedback