Using Docker with Cisco NX-OS

About Docker with Cisco NX-OS

Docker provides a way to run applications securely isolated in a container, packaged with all its dependencies and libraries. See https://docs.docker.com/ for more information on Docker.

Beginning with Cisco NX-OS Release 9.2(1), support is now added for using Docker within Cisco NX-OS on a switch.

The version of Docker that is included on the switch is CE 18.09.0. The Docker daemon is not running by default. You must start it manually or set it up to automatically restart when the switch boots up.

This section describes how to enable and use Docker in the specific context of the switch environment. Refer to the Docker documentation at https://docs.docker.com/ for details on general Docker usage and functionality.

Guidelines and Limitations for Docker

Following are the guidelines and limitations for using Docker on Cisco NX-OS on a switch:

  • If you are running a third-party DHCPD server in Docker, there might be issues with offers reaching the client if used along with SVI. A possible workaround is to use broadcast responses.

  • Docker functionality is supported on the Series switches with at least 8 GB of system RAM.

Prerequisites for Setting Up Docker Containers Within Cisco NX-OS

Following are the prerequisites for using Docker on Cisco NX-OS on a switch:

  • Enable the host Bash shell. To use Docker on Cisco NX-OS on a switch, you must be the root user on the host Bash shell:

     switch# configure terminal
         Enter configuration commands, one per line. End with CNTL/Z.
         switch(config)# feature bash-shell
    
    
  • If the switch is in a network that uses an HTTP proxy server, the http_proxy and https_proxy environment variables must be set up in /etc/sysconfig/docker. For example:

    export http_proxy=http://proxy.esl.cisco.com:8080
    export https_proxy=http://proxy.esl.cisco.com:8080
    
    
  • Verify that the switch clock is set correctly, or you might see the following error message:

    x509: certificate has expired or is not yet valid
  • Verify that the domain name and name servers are configured appropriately for the network and that it is reflected in the/etc/resolv.conf file:

    switch# conf t
         Enter configuration commands, one per line. End with CNTL/Z.
         switch(config)# vrf context management 
         switch(config-vrf)# ip domain-name ?
         WORD Enter the default domain (Max Size 64)
    
         switch(config-vrf)# ip name-server ?
         A.B.C.D Enter an IPv4 address
         A:B::C:D Enter an IPv6 address
    
    root@switch# cat /etc/resolv.conf 
    domain cisco.com #bleed
    nameserver 171.70.168.183 #bleed
    root@switch#

Starting the Docker Daemon

When you start the Docker daemon for the first time, a fixed-size backend storage space is carved out in a file called dockerpart on the bootflash, which is then mounted to /var/lib/docker. If necessary, you can adjust the default size of this space by editing /etc/sysconfig/docker before you start the Docker daemon for the first time. You can also resize this storage space if necessary as described later on.

To start the Docker daemon:

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Start the Docker daemon.

root@switch# service docker start

Step 3

Check the status.

root@switch# service docker status
dockerd (pid 3597) is running...
root@switch#

Note

 

Once you start the Docker daemon, do not delete or tamper with the dockerpart file on the bootflash since it is critical to the docker functionality.

switch# dir bootflash:dockerpart
2000000000 Mar 14 12:50:14 2018 dockerpart


Configure Docker to Start Automatically

You can configure the Docker daemon to always start up automatically when the switch boots up.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Use the chkconfig utility to make the Docker service persistent.

root@switch# chkconfig --add docker
root@n9k-2#

Step 3

Use the chkconfig utility to check the Docker service settings.

root@switch# chkconfig --list | grep docker
docker 0:off 1:off 2:on 3:on 4:on 5:on 6:off
root@switch#

Step 4

To remove the configuration so that Docker does not start up automatically:

root@switch# chkconfig --del docker
root@switch# chkconfig --list | grep docker
root@switch#


Starting Docker Containers: Host Networking Model

If you want Docker containers to have access to all the host network interfaces, including data port and management, start the Docker containers with the --network host option. The user in the container can switch between the different network namespaces at /var/run/netns (corresponding to different VRFs configured in Cisco NX-OS) using the ip netns exec <net_namespace> <cmd>.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Start the Docker container.

Following is an example of starting an Alpine Docker container on the switch and viewing all the network interfaces. The container is launched into the management network namespace by default.

root@switch# docker run --name=alpinerun -v /var/run/netns:/var/run/netns:ro,rslave --rm --network host --cap-add SYS_ADMIN -it alpine
/ # apk --update add iproute2
fetch http://dl-cdn.alpinelinux.org/alpine/v3.7/main/x86_64/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/v3.7/community/x86_64/APKINDEX.tar.gz
(1/6) Installing libelf (0.8.13-r3)
(2/6) Installing libmnl (1.0.4-r0)
(3/6) Installing jansson (2.10-r0)
(4/6) Installing libnftnl-libs (1.0.8-r1)
(5/6) Installing iptables (1.6.1-r1)
(6/6) Installing iproute2 (4.13.0-r0)
Executing iproute2-4.13.0-r0.post-install
Executing busybox-1.27.2-r7.trigger
OK: 7 MiB in 17 packages
/ # 
/ # ip netns list
management
default
/ # 
/ # ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host 
valid_lft forever preferred_lft forever
2: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default 
link/ipip 0.0.0.0 brd 0.0.0.0
3: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default 
link/gre 0.0.0.0 brd 0.0.0.0
...
/ # 
/ # ip netns exec default ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/16 scope host lo
valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default 
link/ether 42:0d:9b:3c:d4:62 brd ff:ff:ff:ff:ff:ff
3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default 
link/ipip 0.0.0.0 brd 0.0.0.0
...


Starting Docker Containers: Bridged Networking Model

If you want Docker containers to only have external network connectivity (typically through the management interface) and you don't necessarily care about visibility into a specific data port or other switch interface, you can start the Docker container with the default Docker bridged networking model. This is more secure than the host networking model described in the previous section since it also provides network namespace isolation.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Start the Docker container.

Following is an example of starting an Alpine Docker container on the switch and installing the iproute2 package.

root@switch# docker run -it --rm alpine
/ # apk --update add iproute2
fetch http://dl-cdn.alpinelinux.org/alpine/v3.7/main/x86_64/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/v3.7/community/x86_64/APKINDEX.tar.gz
(1/6) Installing libelf (0.8.13-r3)
(2/6) Installing libmnl (1.0.4-r0)
(3/6) Installing jansson (2.10-r0)
(4/6) Installing libnftnl-libs (1.0.8-r1)
(5/6) Installing iptables (1.6.1-r1)
(6/6) Installing iproute2 (4.13.0-r0)
Executing iproute2-4.13.0-r0.post-install
Executing busybox-1.27.2-r7.trigger
OK: 7 MiB in 17 packages
/ # 
/ # ip netns list
/ #

Step 3

Determine if you want to set up user namespace isolation.

For containers using the bridged networking model, you can also set up user namespace isolation to further improve security. See Securing Docker Containers With User namespace Isolation for more information.

You can use standard Docker port options to expose a service from within the container, such as sshd. For example:

root@switch# docker run -d -p 18877:22 --name sshd_container sshd_ubuntu

This maps port 22 from within the container to port 18877 on the switch. The service can now be accessed externally through port 18877, as shown in the following example:

root@ubuntu-vm# ssh root@ip_address -p 18887

Mounting the bootflash and volatile Partitions in the Docker Container

You can make the bootflash and volatile partitions visible in the Docker container by passing in the -v /bootflash:/bootflash and -v /volatile:/volatile options in the run command for the Docker container. This is useful if the application in the container needs access to files shared with the host, such as copying a new NX-OS system image to bootflash.


Note


This -v command option allows for any directory to be mounted into the container and may result in information leaking or other accesses that may impact the operation of the NX-OS system. Limit this to resources such as /bootflash and /volatile that are already accessible using NX-OS CLI.


Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Pass in the -v /bootflash:/bootflash and -v /volatile:/volatile options in the run command for the Docker container.

root@switch# docker run -v /bootflash:/bootflash -v /volatile:/volatile -it --rm alpine
/# ls /
bin        etc        media      root       srv        usr
bootflash  home       mnt        run        sys        var
dev        lib        proc       sbin       tmp        volatile
/ #


Enabling Docker Daemon Persistence on Enhanced ISSU Switchover

You can have both the Docker daemon and any running containers persist on an Enhanced ISSU switchover. This is possible since the bootflash on which the backend Docker storage resides is the same and shared between both Active and Standby supervisors.

The Docker containers are disrupted (restarted) during the switchover, so they will not be running continuously.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Before starting the switchover, use the chkconfig utility to make the Docker service persistent.

root@switch# chkconfig --add docker
root@n9k-2#

Step 3

Start any containers using the --restart unless-stopped option so that they will be restarted automatically after the switchover.

The following example starts an Alpine container and configures it to always restart unless it is explicitly stopped or Docker is restarted:

root@switch# docker run -dit --restart unless-stopped alpine
root@n9k-2#

The Docker containers are disrupted (restarted) during the switchover, so they will not be running continuously.


Enabling Docker Daemon Persistence on the Cisco Nexus Platform Switches Switchover

You can have both the Docker daemon and any running containers persist on a switchover between two separate physical supervisors with distinct bootflash partitions. However, for the Cisco Nexus switches, the bootflash partitions on both supervisors are physically separate. You will therefore need to copy the dockerpart file manually to the standby supervisor before performing the switchover.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Start any containers using the --restart unless-stopped option so that they will be restarted automatically after the switchover.

The following example starts an Alpine container and configures it to always restart unless it is explicitly stopped or Docker is restarted:

root@switch# docker run -dit --restart unless-stopped alpine
root@n9k-2#

Note that the Docker containers will be disrupted (restarted) during the switchover, so they will not be running continuously.

Step 3

Before starting the switchover, use the chkconfig utility to make the Docker service persistent.

root@switch# chkconfig --add docker
root@n9k-2#

Step 4

Copy the Docker backend storage partition from the active to the standby supervisor bootflash:

root@switch# service docker stop
Stopping dockerd: dockerd shutdown

root@switch# cp /bootflash/dockerpart /bootflash_sup-remote/

root@switch# service docker start

Resizing the Docker Storage Backend

After starting or using the Docker daemon, you can grow the size of the Docker backend storage space according to your needs.

Procedure


Step 1

Disable the Guest Shell.

If you do not disable the Guest Shell, it may interfere with the resize.

switch# guestshell disable 
You will not be able to access your guest shell if it is disabled. Are you sure you want to disable the guest shell? (y/n) [n] y
switch# 2018 Mar 15 17:16:55 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Deactivating virtual service 'guestshell+' 
2018 Mar 15 17:16:57 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Successfully deactivated virtual service 'guestshell+' 

Step 2

Load Bash and become superuser.

switch# run bash sudo su -

Step 3

Get information on the current amount of storage space available.

root@switch# df -kh /var/lib/docker
Filesystem Size Used Avail Use% Mounted on
/dev/loop12 1.9G 7.6M 1.8G 1% /var/lib/docker
root@n9k-2#

Step 4

Stop the Docker daemon.

root@switch# service docker stop
Stopping dockerd: dockerd shutdown

Step 5

Get information on the current size of the Docker backend storage space (/bootflash/dockerpart).

root@switch# ls -l /bootflash/dockerpart 
-rw-r--r-- 1 root root 2000000000 Mar 15 16:53 /bootflash/dockerpart
root@n9k-2#

Step 6

Resize the Docker backend storage space.

For example, the following command increases the size by 500 megabytes:

root@switch# truncate -s +500MB /bootflash/dockerpart
root@n9k-2#

Step 7

Get updated information on the size of the Docker backend storage space to verify that the resizing process was completed successfully.

For example, the following output confirms that the size of the Docker backend storage was successfully increased by 500 megabytes:

root@switch# ls -l /bootflash/dockerpart 
-rw-r--r-- 1 root root 2500000000 Mar 15 16:54 /bootflash/dockerpart
root@n9k-2#

Step 8

Check the size of the filesystem on /bootflash/dockerpart.

root@switch# e2fsck -f /bootflash/dockerpart
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/bootflash/dockerpart: 528/122160 files (0.6% non-contiguous), 17794/488281 blocks

Step 9

Resize the filesystem on /bootflash/dockerpart.

root@switch# /sbin/resize2fs /bootflash/dockerpart 
resize2fs 1.42.9 (28-Dec-2013)
Resizing the filesystem on /bootflash/dockerpart to 610351 (4k) blocks.
The filesystem on /bootflash/dockerpart is now 610351 blocks long.

Step 10

Check the size of the filesystem on /bootflash/dockerpart again to confirm that the filesystem was successfully resized.

root@switch# e2fsck -f /bootflash/dockerpart
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/bootflash/dockerpart: 528/154736 files (0.6% non-contiguous), 19838/610351 blocks

Step 11

Start the Docker daemon again.

root@switch# service docker start
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Starting dockerd with args '--debug=true': 

Step 12

Verify the new amount of storage space available.

root@switch# df -kh /var/lib/docker
Filesystem Size Used Avail Use% Mounted on
/dev/loop12 2.3G 7.6M 2.3G 1% /var/lib/docker

Step 13

Exit out of Bash shell.

root@switch# exit
logout
switch#

Step 14

Enable the Guest Shell, if necessary.

switch# guestshell enable 

switch# 2018 Mar 15 17:12:53 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Activating virtual service 'guestshell+'
switch# 2018 Mar 15 17:13:18 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Successfully activated virtual service 'guestshell+'


Stopping the Docker Daemon

If you no longer wish to use Docker, follow the procedures in this topic to stop the Docker daemon.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Stop the Docker daemon.

root@switch# service docker stop
Stopping dockerd: dockerd shutdown

Step 3

Verify that the Docker daemon is stopped.

root@switch# service docker status
dockerd is stopped
root@switch#

Note

 
You can also delete the dockerpart file on the bootflash at this point, if necessary:
switch# delete bootflash:dockerpart
Do you want to delete "/dockerpart" ? (yes/no/abort) y
switch# 


Docker Container Security

Following are the Docker container security recommendations:

  • Run in a separate user namespace if possible.

  • Run in a separate network namespace if possible.

  • Use cgroups to limit resources. An existing cgroup (ext_ser) is created to limit hosted applications to what the platform team has deemed reasonable for extra software running on the switch. Docker allows use of this and limiting per-container resources.

  • Do not add unnecessary POSIX capabilities.

Securing Docker Containers With User namespace Isolation

For containers using the bridged networking model, you can also set up user namespace isolation to further improve security. See https://docs.docker.com/engine/security/userns-remap/ for more information.

Procedure


Step 1

Determine if a dockremap group already exists on your system.

A dockremap user must already be set up on your system by default. If the dockremap group doesn't already exist, follow these steps to create it.

  1. Enter the following command to create the dockremap group:

    root@switch# groupadd dockremap -r
    
    
  2. Create the dockremap user, unless it already exists:

    root@switch# useradd dockremap -r -g dockremap
    
    
  3. Verify that the dockremap group and the dockremap user were created successfully:

    root@switch# id dockremap
    uid=999(dockremap) gid=498(dockremap) groups=498(dockremap)
    root@switch# 
    
    

Step 2

Add the desired re-mapped ID and range to the /etc/subuid and /etc/subgid.

For example:
root@switch# echo "dockremap:123000:65536" >> /etc/subuid
root@switch# echo "dockremap:123000:65536" >> /etc/subgid

Step 3

Using a text editor, add the --userns-remap=default option to the other_args field in the /etc/sysconfig/docker file.

For example:
other_args="–debug=true --userns-remap=default"

Step 4

Restart the Docker daemon, or start it if it is not already running, using service docker [re]start.

For example:
root@switch# service docker [re]start

Refer to the Docker documentation at https://docs.docker.com/engine/security/userns-remap/ for more information on configuring and using containers with user namespace isolation.


Moving the cgroup Partition

The cgroup partition for third-party services is ext_ser, which limits CPU usage to 25% per core. Cisco recommends that you run your Docker container under this ext_ser partition.

If the Docker container is run without the --cgroup-parent=/ext_ser/ option, it can get up to the full 100% host CPU access, which can interfere with the regular operation of Cisco NX-OS.

Procedure


Step 1

Load Bash and become superuser.

switch# run bash sudo su -

Step 2

Run the Docker container under the ext_ser partition.

For example:

root@switch# docker run --name=alpinerun -v /var/run/netns:/var/run/netns:ro,rslave --rm --network host --cgroup-parent=/ext_ser/ --cap-add SYS_ADMIN -it alpine
/ #


Docker Troubleshooting

These topics describe issues that can arise with Docker containers and provides possible resolutions.

Docker Fails to Start

Problem: Docker fails to start, showing an error message similar to the following:

switch# run bash
bash-4.3$ service docker start
Free bootflash: 39099 MB, total bootflash: 51771 MB
Carving docker bootflash storage: 2000 MB
2000+0 records in
2000+0 records out
2000000000 bytes (2.0 GB) copied, 22.3039 s, 89.7 MB/s
losetup: /dev/loop18: failed to set up loop device: Permission denied
mke2fs 1.42.9 (28-Dec-2013)
mkfs.ext4: Device size reported to be zero.  Invalid partition specified, or
        partition table wasn't reread after running fdisk, due to
        a modified partition being busy and in use.  You may need to reboot
        to re-read your partition table.

Failed to create docker volume

Possible Cause: You might be running Bash as an admin user instead of as a root user.

Solution: Determine if you are running Bash as an admin user instead of as a root user:

bash-4.3$ whoami
admin

Exit out of Bash and run Bash as root user:


bash-4.3$ exit 
switch# run bash sudo su -

Docker Fails to Start Due to Insufficient Storage

Problem: Docker fails to start, showing an error message similar to the following, due to insufficient bootflash storage:

root@switch# service docker start
Free bootflash: 790 MB, total bootflash: 3471 MB
Need at least 2000 MB free bootflash space for docker storage

Possible Cause: You might not have enough free bootflash storage.

Solution: Free up space or adjust the variable_dockerstrg values in /etc/sysconfig/docker as needed, then restart the Docker daemon:

root@switch# cat /etc/sysconfig/docker
# Replace the below with your own docker storage backend boundary value (in MB)
# if desired.
boundary_dockerstrg=5000

# Replace the below with your own docker storage backend values (in MB) if
# desired. The smaller value applies to platforms with less than
# $boundary_dockerstrg total bootflash space, the larger value for more than
# $boundary_dockerstrg of total bootflash space.
small_dockerstrg=300
large_dockerstrg=2000

Failure to Pull Images from Docker Hub (509 Certificate Expiration Error Message)

Problem: The system fails to pull images from the Docker hub with an error message similar to the following:

root@switch# docker pull alpine
Using default tag: latest
Error response from daemon: Get https://registry-1.docker.io/v2/: x509: certificate has expired or is not yet valid

Possible Cause: The system clock might not be set correctly.

Solution: Determine if the clock is set correctly or not:

root@n9k-2# sh clock
15:57:48.963 EST Thu Apr 25 2002
Time source is Hardware Calendar

Reset the clock, if necessary:

root@n9k-2# clock set hh:mm:ss { day month | month day } year

For example:

root@n9k-2# clock set 14:12:00 10 feb 2018

Failure to Pull Images from Docker Hub (Client Timeout Error Message)

Problem: The system fails to pull images from the Docker hub with an error message similar to the following:

root@switch# docker pull alpine
Using default tag: latest
Error response from daemon: Get https://registry-1.docker.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)

Possible Cause: The proxies or DNS settings might not be set correctly.

Solution: Check the proxy settings and fix them, if necessary, then restart the Docker daemon:

root@switch# cat /etc/sysconfig/docker | grep proxy
#export http_proxy=http://proxy.esl.cisco.com:8080
#export https_proxy=http://proxy.esl.cisco.com:8080
root@switch# service docker [re]start

Check the DNS settings and fix them, if necessary, then restart the Docker daemon:

root@switch# cat /etc/resolv.conf 
domain cisco.com #bleed
nameserver 171.70.168.183 #bleed
root@switch# # conf t
     Enter configuration commands, one per line. End with CNTL/Z.
     switch(config)# vrf context management 
     switch(config-vrf)# ip domain-name ?
     WORD Enter the default domain (Max Size 64)

     switch(config-vrf)# ip name-server ?
     A.B.C.D Enter an IPv4 address
     A:B::C:D Enter an IPv6 address
root@switch# service docker [re]start

Docker Daemon or Containers Not Running On Switch Reload or Switchover

Problem: The Docker daemon or containers do not run after you have performed a switch reload or switchover.

Possible Cause: The Docker daemon might not be configured to persist on a switch reload or switchover.

Solution: Verify that the Docker daemon is configured to persist on a switch reload or switchover using the chkconfig command, then start the necessary Docker containers using the --restart unless-stopped option. For example, to start an Alpine container:

root@switch# chkconfig --add docker
root@switch#
root@switch# chkconfig --list | grep docker
docker 0:off 1:off 2:on 3:on 4:on 5:on 6:off
root@switch# docker run -dit --restart unless-stopped alpine

Resizing of Docker Storage Backend Fails

Problem: An attempt to resize the Docker backend storage failed.

Possible Cause: You might not have Guest Shell disabled.

Solution: Use the following command to determine if Guest Shell is disabled:

root@switch# losetup -a | grep dockerpart
root@n9k-2#

The command should not display any output if Guest Shell is disabled.

Enter the following command to disable the Guest Shell, if necessary:

switch# guestshell disable

If you still cannot resize the Docker backend storage, you can delete /bootflash/dockerpart, then adjust the [small_]large_dockerstrg in /etc/sysconfig/docker, then start Docker again to get a fresh Docker partition with the size that you want.

Docker Container Doesn't Receive Incoming Traffic On a Port

Problem: The Docker container doesn't receive incoming traffic on a port.

Possible Cause: The Docker container might be using a netstack port instead of a kstack port.

Solution: Verify that any ephemeral ports that are used by Docker containers are within the kstack range. Otherwise any incoming packets can get sent to netstack for servicing and dropped.

switch# show socket local-port-range 
Kstack local port range (15001 - 58000)
Netstack local port range (58001 - 63535) and nat port range (63536 - 65535)
switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# sockets local-port-range <start_port> <end_port>
switch# run bash sudo su -
root@switch# cat /proc/sys/net/ipv4/ip_local_port_range
15001   58000
root@switch#

Unable to See Data Port And/Or Management Interfaces in Docker Container

Problem: You are unable to see the data port or management interfaces in the Docker container.

Solution:

  • Verify that the Docker container is started in the host network namespace with all host namespaces mapped in using the -v /var/run/netns:/var/run/netns:ro,rslave --network host options.

  • Once in the container, you will be in the management network namespace by default. You can use the ip netns utility to move to the default (init) network namespace, which has the data port interfaces. The ip netns utility might need to be installed in the container using dnf, apk, or something similar.

General Troubleshooting Tips

Problem: You have other issues with Docker containers that were not resolved using other troubleshooting processes.

Solution:

  • Look for dockerd debug output in /var/log/docker for any clues as to what is wrong.

  • Verify that your switch has 8 GB or more of RAM. Docker functionality is not supported on any switch that has less than 8 GB of RAM.

Back to TopBack to Top