New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.2(x) and tells you where they are documented.
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
| LXC Upgrade: Add skip-kernel-upgrade Option to install command | A new option "skip-kernel-upgrade" is added to the install command for the switches that are in LXC mode and non-disruptive. | 10.2(3)F | Cisco NX-OS Software Downgrade Guidelines |
|
Advertise switch chassis MAC address |
ISSD Guideline added for the new lldp chassis-id switch command that advertises the switch chassis MAC address instead of the port MAC address. |
10.2(3)F |
|
|
VPC Fabric Peering ISSU support |
Added Non-disruptive ISSU support for VPC fabric peering |
10.2(3)F |
|
|
Enhanced upgrade history logging |
Added new cli show upgrade history details command which displays user login details. |
10.2(3)F |
|
|
FCoE/FC NPV |
Added support for Cisco Nexus 9336C-FX2-E Platform Switches |
10.2(2)F |
|
|
Support for 9300-GX2B |
Added support for Cisco Nexus 9300-GX2B platform switches. |
10.2(2)F |
|
|
64-bit migration |
Added 64-bit image support for Cisco Nexus 9504 and 9508 platform switches, and Cisco Nexus 9508-R, R2, and RX line cards. |
10.2(2)F |
|
|
FEX |
Added Straight-Through FEX and Dual-Homed FEX support on ISSU for Cisco Nexus 9300-EX and 9300-FX Platform Switches |
10.2(1)F |
|
|
IPv6 BFD |
IPv6 BFD session may flap after the ISSU |
10.2(1)F |
|
|
64 bit image |
Added PID support to 64 bit image |
10.2(1)F |
|
|
Release-specific updates |
Option to save bootflash space while converting the boot mode |
10.2(1)F |
Converting from Cisco NX-OS to ACI Boot Mode and from ACI Boot Mode Back to Cisco NX-OS |
Feedback