New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
VXLAN PIM BiDir underlay support |
Added support for PIM BiDir on Cisco Nexus 9300-FX3/GX/GX2/H2R/H1 switches, 9500 switches with 9700-GX line cards. |
10.3(5)M |
|
|
Q-in-VNI with Layer 2 Protocol Tunneling |
Added Ethertype support for Q-in-VNI with L2PT on Cisco Nexus 9300-FX2/FX3/GX/GX2 ToR switches. |
10.3(3)F |
Guidelines and Limitations for Q-in-VNI with L2PT |
|
PKI Support on CloudSec |
Added PKI Support on CloudSec. |
10.3(3)F |
|
|
IPv6 underlay - VXLAN Access features |
VXLAN access features are supported with IPv6 underlay. |
10.3(3)F |
Guidelines and Limitations for VXLAN with IPv6 in the Underlay (VXLANv6) |
|
Expanded support for Type-6 password encryption |
Added Type-6 encryption support for LDP user password. |
10.3(3)F |
Guidelines and Limitations for Configuring Seamless Integration of EVPN with L3VPN (MPLS LDP) |
|
TRM Data MDT |
Supports optimized TRM by using MVPN S-PMSI routes. |
10.3(2)F |
|
|
Enhanced Convergence for vPC BGW CloudSec Deployments |
Enhanced the support on Convergence for vPC BGW CloudSec Deployments. |
10.3.(2)F |
|
|
vPC Fabric Peering |
The vPC Fabric Peering is supported for IPv6 underlay on Cisco Nexus 9300-EX/FX/FXP/FX2/FX3/GX/GX2 ToR switches. |
10.3(2)F |
|
|
Q-in-VNI with Layer 2 Protocol Tunneling |
Q-in-VNI with Layer 2 Protocol Tunneling is supported on Cisco Nexus 9300-FX/FX2/FX3/GX/GX2 ToR switches. |
10.3(2)F |
|
|
EVPN Null route |
Added support for VXLAN BGP-EVPN Null route. |
10.3(2)F |
|
|
Multicast Flow Path Visibility for TRM Flows |
The Multicast Flow Path Visualization (FPV) for TRM Flows feature is supported for TRM L3 mode and underlay multicast along with the already supported multicast flows. |
10.3(2)F |
About Multicast Flow Path Visibility for TRM Flows Guidelines and Limitations for Layer 3 Tenant Routed Multicast |
|
DSCP Based SR-TE Flow Steering |
Added support for DSCP based SR-TE flow steering on Cisco Nexus 9300-FX platform switches and Cisco Nexus 9700-FX and 9700-GX line cards. |
10.3(2)F |
Guidelines and Limitations for Configuring Seamless Integration of EVPN with L3VPN (MPLS SR) |
|
Seamless integration of EVPN with L3VPN (MPLS SR) |
Added support for Seamless integration of EVPN with L3VPN (MPLS SR) on Cisco Nexus 9300-FX platform switches and Cisco Nexus 9700-FX and 9700-GX line cards. |
10.3(2)F |
Guidelines and Limitations for Configuring Seamless Integration of EVPN with L3VPN (MPLS SR) |
|
DSCP Based SR-TE Flow Steering |
Allows source routing of VXLAN packets that are matched using the DSCP fields in the IP header and steered into an SRTE path. |
10.3(1)F |
Information About Configuring Seamless Integration of EVPN with L3VPN (MPLS SR) Guidelines and Limitations for Configuring Seamless Integration of EVPN with L3VPN (MPLS SR) |
|
Flex stats for TRM - underlay and overlay mroutes |
The flex stats configuration is supported on Cisco Nexus 9300-X Cloud Scale switches. |
10.3(1)F |
|
|
Extended dual stack host template |
Support for extended dual-stack-host-scale template is provided for ARP, ND, and MAC on the Cisco Nexus 9300-FX3/GX/GX2B ToR switches. |
10.3(1)F |
|
|
TRM support for new L3VNI mode |
TRM support for the new L3VNI mode CLIs are provided on Cisco Nexus 9300-X Cloud Scale switches. |
10.3(1)F |
Guidelines and Limitations for Layer 3 Tenant Routed Multicast |
|
VXLAN overlay with NBM underlay |
The NBM and VXLAN can co-exist on the same box but in two different VRFs. |
10.3(1)F |
|
|
ND Suppression support |
ND suppression feature is supported to reduce the NS traffic across the overlay. |
10.3(1)F |
|
|
VPC Fabric peering |
The IPv4 vPC Fabric peering config works only with the IPv4 VXLAN underlay and the IPv6 vPC Fabric peering config will work only with the IPv6 VXLAN underlay. |
10.3(1)F |
Feedback