About Nexus 9300v and 9500v Lite NX-OS Image
An additional image, NX-OS lite (nxos64-cs-lite.10.2.2.75.F.bin), is introduced in Cisco NX-OS Release 10.2(3)F. This has a reduced memory footprint, resulting in a much smaller image size than the earlier images for Cisco Nexus 9300v and 9500v. This image can be installed during the boot-up time, and the image bring up is faster than the earlier images. However, before loading the lite image, perform a write-erase-reload, as some of the configurations may not be valid.
Note |
This image contains only base RPMs, which are needed to support deployment scenarios such as VXLAN EVPN, no F+L, with IPv4/Ipv6 underlay (OSPF/IS-IS), and M-site functionality including vPC on BL, PC/vPC, LACP, and DME/YANG/telemetry. Rest of the RPMs are omitted from the lite NX-OS image. |
Resource Requirements
The following table displays the resource requirements for Nexus 9300v and 9500v Lite:
Resource |
Specification |
---|---|
Minimum RAM |
8.0 G (basic bootup) |
Recommended RAM |
8.0 G (depending on the number of features) |
Minimum vCPUs |
1 |
Recommended vCPUs |
2 |
Minimum vNICs |
1 |
Maximum vNICs |
65 |
Virtual Artifacts
The following table displays the virtual artifact(s) for Nexus 9300v and 9500v Lite:
VM Type |
Hypervisor |
Virtual Artifact |
Description |
---|---|---|---|
N9300v Lite |
ESXI 6.5 or higher |
nexus9300v64-lite.10.2.2.75.F.ova |
Contains virtual disk, machine definition, and NXOS image. |
N9300v Lite |
KVM/QEMU 3.0.0 or higher |
nexus9300v64-lite.10.2.2.75.F.qcow2 |
Contains virtual disk and NXOS image on bootflash. |
N9300v Lite |
Vagrant 2.2.6 or higher |
nexus9300v64-lite.10.2.2.75.F.box |
Contains a preinstalled NXOS image on a virtual disk along with a machine definition. |
N9500v Lite |
ESXI 6.5 or higher |
nexus9500v64-lite.10.2.2.75.F.ova |
Contains virtual disk, machine definition, and NXOS image. |
N9500v Lite |
KVM/QEMU 3.0.0 or higher |
nexus9500v64-lite.10.2.2.75.F.qcow2 |
Contains virtual disk and NXOS image on bootflash. |