Cisco Nexus 9000 Series NX-OS Label Switching Configuration Guide Release 10.4(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 14, 2023

Chapter: IETF RFCs Supported for Label Switching

IETF RFCs Supported for Label Switching
IETF RFCs Supported for Label Switching

IETF RFCs Supported for Label Switching

This appendix lists the IETF RFCs supported for label switching on the device.

IETF RFCs Supported for Label Switching

This table lists the IETF RFCs supported for label switching on the device.


RFCs	Title
RFC 3107	Carrying Label Information in BGP-4
RFC 7752	North-Bound Distribution of Link-State and Traffic Engineering (TE) Information Using BGP
RFC 8029	Detecting Multiprotocol Label Switched (MPLS) Data-Plane failures.
RFC 8287	Label Switched Path (LSP) Ping/Traceroute for Segment Routing (SR) IGP-Prefix and IGP-Adjacency Segment Identifiers (SIDs) with MPLS Data Planes.
Draft-ietf-idr-bgpls-segment-routing-epe-05	Segment Routing BGP Egress Peer Engineering BGP-LS Extensions draft-ietf-idr-bgpls-segment-routing-epe-05

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)