New and Changed Information
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
Class E IP Address |
Added support for configuring NX-OS feature using class E IP address |
10.4(2)F |
|
|
Ability to limit ARP cache for L3 interfaces |
Added ip arp cache intf-limit command to configure the number of maximum ARP cache entries allowed per interface. |
10.4(2)F |
|
|
Keychain support for OSPFv3 |
Keychain support is provided for OSPFv3 encryption and authentication commands. We recommend configuring keys with Type-6 encrypted format in keychain configuration. |
10.4(1)F |
Guidelines and Limitations for OSPFv3 |
|
Support ARP response for out-of-subnet |
Added ip arp outside-subnet command to allow ARP packet processing, learning ARP entries and sending response for out of subnet traffic. |
10.4(1)F |
|
|
Multi VRF support |
Added support for Multi VRF on the following switches and line cards:
|
10.4(1)F |
Guidelines and Limitations for VRFs |
|
IPv4 and IPv6 Static Routing |
Added support for Static routing on the following switches and line cards:
|
10.4(1)F |
|
|
IPv4 and IPv6 Dynamic Routing |
Added support for Dynamic routing on the following switches and line cards:
|
10.4(1)F |
|
|
OSPF |
Added support for OSPF on the following switches and line cards:
|
10.4(1)F |
|
|
EIGRP |
Added support for EIGRP on the following switches and line cards:
|
10.4(1)F |
|
|
BGP |
Added support for BGP on the following switches and line cards:
|
10.4(1)F |
|
|
Route leak between VRFs |
Added support for Route leak between VRFs on the following switches and line cards:
|
10.4(1)F |
|
|
Unicast consistency checker |
Added support for Unicast consistency checker on the following switches and line cards:
|
10.4(1)F |
Feedback