Sample Show Command Output (Spine-Leaf Deployment)
This section provides output examples for switches in a spine-leaf deployment.
Note |
If you do not specify a VRF using the vrf vrf-name option, these commands display output for the default VRF. |
This example shows sample output for the show nbm defaults vrf all command:
switch# show nbm defaults vrf all
-----------------------------------------
Defaults for VRF default (1)
-----------------------------------------
Default Flow Policy:
Bandwidth : 1000 Kbps
DSCP : 0
Queue ID : 7
Policer : Enabled
Operation mode (cache) : EOR_PIM_A
Operation mode : EOR_PIM_A
Unicast Fabric Bandwidth : 1
Number of ASM groups : 1
Group 1 : 224.0.0.0/8
Default Host Policies:
Sender : Permit
Local Receiver : Permit
External Receiver (PIM) : Permit
-----------------------------------------
Defaults for VRF red (3)
-----------------------------------------
Default Flow Policy:
Bandwidth : 1500 Kbps
DSCP : 0
Queue ID : 7
Policer : Enabled
Operation mode (cache) : EOR_PIM_A
Operation mode : EOR_PIM_A
Unicast Fabric Bandwidth : 1
Number of ASM groups : 1
Group 1 : 224.0.0.0/8
Default Host Policies:
Sender : Permit
Local Receiver : Permit
External Receiver (PIM) : Permit
This example shows sample output for the show nbm flow-policy vrf all command:
switch# show nbm flow-policy vrf all
Flow Policy for VRF 'blue'
--------------------------------------------------
Total Group Ranges Found = 0
Total Policies Defined = 0
Flow Policy for VRF 'default'
--------------------------------------------------
Default BW (Kbps) : 1890
Default DSCP : 36
Default QOS : 7
Default Policer : Enabled
------------------------------------------------------------------------------------------
| Group Range | BW (Kbps) | DSCP | QOS | Policer | Policy Name
------------------------------------------------------------------------------------------
| 235.1.1.1-235.1.2.255 | 30 | 0 | 7 | Enabled | Dynamic_IGMP
| 238.4.1.1-238.4.1.1 | 3000000 | 0 | 7 | Enabled | NBM_Static_2
| 238.4.1.2-238.4.1.10 | 3000000 | 0 | 7 | Enabled | NBM_Static_2
| 238.4.1.11-238.4.1.11 | 3000000 | 0 | 7 | Enabled | NBM_Static_2
| 238.4.1.12-238.4.1.100 | 3000000 | 0 | 7 | Enabled | NBM_Static_2
| 238.4.1.101-238.4.1.255 | 3000000 | 0 | 7 | Enabled | NBM_Static_2
| 239.1.1.2-239.1.1.2 | 100 | 0 | 7 | Disabled | SVI_239
| 239.1.1.3-239.1.1.9 | 100 | 0 | 7 | Disabled | SVI_239
| 239.1.1.10-239.1.1.10 | 100 | 0 | 7 | Disabled | SVI_239
| 239.1.1.11-239.1.1.30 | 100 | 0 | 7 | Disabled | SVI_239
| 239.1.1.1-239.1.1.1 | 200 | 0 | 7 | Enabled | SVI_239.1.1.1
| 227.1.1.51-227.1.1.51 | 1000 | 0 | 7 | Enabled | Dynamic_227.1
| 227.1.1.52-227.1.1.200 | 1000 | 0 | 7 | Enabled | Dynamic_227.1
| 229.1.1.1-229.1.1.100 | 1000 | 0 | 7 | Disabled | NBM_229
| 234.1.1.1-234.1.1.100 | 30 | 0 | 7 | Disabled | NBM_234
| 234.1.1.101-234.1.1.200 | 30 | 0 | 7 | Disabled | NBM_234
| 237.1.1.1-237.1.1.200 | 3000 | 0 | 7 | Disabled | NBM_Static_237.1
| 237.1.2.1-237.1.2.200 | 3000 | 0 | 7 | Disabled | NBM_Static_237.1
...
| 237.1.1.201-237.1.1.255 | 3000 | 0 | 7 | Enabled | NBM_Static_237_2
| 237.1.2.201-237.1.2.255 | 3000 | 0 | 7 | Enabled | NBM_Static_237_2
| 237.1.3.201-237.1.3.255 | 3000 | 0 | 7 | Enabled | NBM_Static_237_2
| 237.1.4.201-237.1.4.255 | 3000 | 0 | 7 | Enabled | NBM_Static_237_2
| 232.1.1.9-232.1.1.200 | 200 | 0 | 7 | Enabled | NBM_Static_232_2
| 232.1.1.5-232.1.1.7 | 200 | 0 | 7 | Enabled | NBM_Static_232_2
| 232.1.1.8-232.1.1.8 | 200 | 0 | 7 | Enabled | NBM_Static_232_2
| 235.2.2.2-235.2.2.10 | 3000000 | 24 | 7 | Disabled | Test_R_V
------------------------------------------------------------------------------------------
Total Group Ranges Found = 56
Total Policies Defined = 16
This example shows sample output for the show nbm flows detail vrf all command:
switch# show nbm flows detail vrf all
----------------------------------------------------------
NBM Flows for VRF 'default'
----------------------------------------------------------
Active Source-Group-Based Flow(s) :
Mcast-Group Src-IP Uptime Src-Intf Nbr-Device LID Profile Status Num Rx Bw Mbps CFG Bw Slot Unit Slice DSCP QOS Policed FHR Policy-name
Rcvr-Num Rcvr-slot Unit Num-Rcvrs Rcvr-ifidx IOD Rcvr-Intf Nbr-Device
----------------------------------------------------------
NBM Flows for VRF 'red'
----------------------------------------------------------
Active Source-Group-Based Flow(s) :
Mcast-Group Src-IP Uptime Src-Intf Nbr-Device LID Profile Status Num Rx Bw Mbps CFG Bw Slot Unit Slice DSCP QOS Policed FHR Policy-name
Rcvr-Num Rcvr-slot Unit Num-Rcvrs Rcvr-ifidx IOD Rcvr-Intf Nbr-Device
225.1.1.11 10.1.4.2 00:00:11 Vlan100 not-applicable * * ACTIVE 0 1.500 1.500 0 0 0 0 7 Yes Yes Default
225.1.7.228 10.1.4.2 00:00:12 Vlan100 not-applicable * * ACTIVE 0 1.500 1.500 0 0 0 0 7 Yes Yes Default
225.1.6.193 10.1.4.2 00:00:12 Vlan100 not-applicable * * ACTIVE 0 1.500 1.500 0 0 0 0 7 Yes Yes Default
...
225.1.19.52 10.2.3.2 00:02:13 Eth1/31 gretta-r10-eor2 349 962 ACTIVE 1 1.500 1.500 1 5 0 0 7 Yes Yes Default
1 0 0 1 0x09010064 2 Vlan100 not-applicable
225.1.23.31 10.2.3.2 00:35:04 Eth1/31 gretta-r10-eor2 1119 962 ACTIVE 1 1.500 1.500 1 5 0 0 7 Yes Yes Default
1 0 0 1 0x09010064 2 Vlan100 not-applicable
...
225.1.0.23 10.1.4.2 02:20:38 Vlan100 not-applicable * * ACTIVE 1 1.500 1.500 0 0 0 0 7 Yes Yes Default
1 1 5 1 0x1a003c00 48 Eth1/31 gretta-r10-eor2
225.1.0.10 10.1.4.2 02:20:38 Vlan100 not-applicable * * ACTIVE 1 1.500 1.500 0 0 0 0 7 Yes Yes Default
1 1 5 1 0x1a003e00 49 Eth1/32 gretta-r10-eor2
...
225.1.0.3 10.1.4.2 02:20:38 Vlan100 not-applicable * * ACTIVE 1 1.500 1.500 0 0 0 0 7 Yes Yes Default
1 1 5 1 0x1a003c00 48 Eth1/31 gretta-r10-eor2
This example shows sample output for the show nbm flows static vrf all command:
switch# show nbm flows static vrf all
+-----------------------------------------------------------------------+
| NBM Static Flow Table for VRF "default"
+-----------------------------------------------------------------------+
+-----------------------------------------------------------------------+
| NBM Static Flow Table for VRF "moon"
+-----------------------------------------------------------------------+
+-----------------------------------------------------------------------+
| Stitched Flows |
+-----------------------------------------------------------------------+
| Source | Group | Egress Intf | Host IP |
+-----------------------------------------------------------------------+
| 22.7.1.2 | 233.10.1.1 | | |
| | | Null0 | |
| | | eth6/20/3 | |
| | | eth6/20/3 | 21.7.1.2 |
| 22.7.1.2 | 233.10.1.2 | | |
| | | Null0 | |
| | | eth6/20/3 | |
| | | eth6/20/3 | 21.7.1.2 |
| 22.7.1.2 | 233.10.1.3 | | |
| | | Null0 | |
| | | eth6/20/3 | |
| | | eth6/20/3 | 21.7.1.2 |
| 22.7.1.2 | 233.10.1.4 | | |
| | | Null0 | |
| | | eth6/20/3 | |
| | | eth6/20/3 | 21.7.1.2 |
...
| 0.0.0.0 | 233.80.1.149 | | |
| | | Null0 | |
| | | eth6/20/3 | |
| | | eth6/20/3 | 21.7.1.2 |
| 0.0.0.0 | 233.80.1.150 | | |
| | | Null0 | |
| | | eth6/20/3 | |
| | | eth6/20/3 | 21.7.1.2 |
+-----------------------------------------------------------------------+
+-----------------------------------------------------------------------+
| Unstitched Flows |
+-----------------------------------------------------------------------+
| Source | Group | Egress Intf | Host IP |
+-----------------------------------------------------------------------+
| 0.0.0.0 | 233.80.1.1 | | |
| | | vlan851 | |
+-----------------------------------------------------------------------+
This example shows sample output for the show nbm flows statistics vrf all command:
switch# show nbm flows statistics vrf all
----------------------------------------------------------
NBM Flow Statistics for VRF 'default'
----------------------------------------------------------
Source-Group-Based Flow Statistics :
Mcast-Group Src-IP Uptime Src-Intf Packets Bytes Allow-Bytes Drop-Bytes
----------------------------------------------------------
NBM Flow Statistics for VRF 'red'
----------------------------------------------------------
Source-Group-Based Flow Statistics :
Mcast-Group Src-IP Uptime Src-Intf Packets Bytes Allow-Bytes Drop-Bytes
225.1.2.47 10.2.3.2 02:29:53 Eth1/32 1124095 1124095000 1124095000 0
225.1.2.45 10.2.3.2 02:29:53 Eth1/31 1124096 1124096000 1124096000 0
225.1.2.44 10.2.3.2 02:29:53 Eth1/32 1124096 1124096000 1124096000 0
225.1.2.43 10.2.3.2 02:29:53 Eth1/31 1124096 1124096000 1124096000 0
...
225.1.2.2 10.2.2.2 02:29:53 Eth1/32 1124115 1124115000 1124115000 0
225.1.2.1 10.2.2.2 02:29:53 Eth1/31 1124114 1124114000 1124114000 0
225.1.0.2 10.1.4.2 02:30:13 Vlan100 1125105 1125105000 1125105000 0
225.1.0.1 10.1.4.2 02:30:13 Vlan100 1125104 1125104000 1125104000 0
225.1.0.24 10.1.4.2 02:30:13 Vlan100 1125104 1125104000 1125104000 0
225.1.0.23 10.1.4.2 02:30:13 Vlan100 1125103 1125103000 1125103000 0
225.1.0.22 10.1.4.2 02:30:13 Vlan100 1125104 1125104000 1125104000 0
225.1.0.21 10.1.4.2 02:30:13 Vlan100 1125103 1125103000 1125103000 0
225.1.0.20 10.1.4.2 02:30:13 Vlan100 1125104 1125104000 1125104000 0
225.1.0.19 10.1.4.2 02:30:13 Vlan100 1125103 1125103000 1125103000 0
...
225.1.0.5 10.1.4.2 02:30:13 Vlan100 1125102 1125102000 1125102000 0
225.1.0.4 10.1.4.2 02:30:13 Vlan100 1125103 1125103000 1125103000 0
225.1.0.3 10.1.4.2 02:30:13 Vlan100 1125102 1125102000 1125102000 0
switch1#
switch# show nbm flows statistics group 225.1.2.47 source 10.2.3.2 vrf red
----------------------------------------------------------
NBM Flow Statistics for VRF 'red'
----------------------------------------------------------
Source-Group-Based Flow Statistics for Source 10.2.3.2 Group 225.1.2.47 :
Mcast-Group Src-IP Uptime Src-Intf Packets Bytes Allow-Bytes Drop-Bytes
225.1.2.47 10.2.3.2 02:29:53 Eth1/32 1124095 1124095000 1124095000 0
This example shows sample output for the show nbm flows summary vrf all command:
switch# show nbm flows summary vrf all
------------------------------------------------
NBM Flow Summary for VRF 'default'
------------------------------------------------
IIF = Incoming Interface
OIF = Outgoing Interface
----------------------------------------------------------------------
| Category | (*,G) | (S,G) | Total |
----------------------------------------------------------------------
| All Flows | 0 | 0 | 0 |
| Flows with No receivers | 0 | 0 | 0 |
| Flows with OIF | 0 | 0 | 0 |
| Flows with SVI IIF | 0 | 0 | 0 |
| Flows with PHY IIF | 0 | 0 | 0 |
| Flows (SVI) with Policing | 0 | 0 | 0 |
| Flows (PHY) with Policing | 0 | 0 | 0 |
----------------------------------------------------------------------
------------------------------------------------
NBM Flow Summary for VRF 'red'
------------------------------------------------
IIF = Incoming Interface
OIF = Outgoing Interface
----------------------------------------------------------------------
| Category | (*,G) | (S,G) | Total |
----------------------------------------------------------------------
| All Flows | 0 | 72 | 72 |
| Flows with No receivers | 0 | 0 | 0 |
| Flows with OIF | 0 | 72 | 72 |
| Flows with SVI IIF | 0 | 24 | 24 |
| Flows with PHY IIF | 0 | 48 | 48 |
| Flows (SVI) with Policing | 0 | 24 | 0 |
| Flows (PHY) with Policing | 0 | 48 | 0 |
----------------------------------------------------------------------
----------------------------------------------------------------------
| Incoming Interface Name | (*,G) | (S,G) | Total |
----------------------------------------------------------------------
| Vlan100 | 0 | 24 | 24 |
| Ethernet1/31 | 0 | 24 | 24 |
| Ethernet1/32 | 0 | 24 | 24 |
----------------------------------------------------------------------
This example shows sample output for the show nbm flows vrf all command:
switch# show nbm flows vrf all
----------------------------------------------------------
NBM Flows for VRF 'default'
----------------------------------------------------------
Active Source-Group-Based Flow(s) :
Mcast-Group Src-IP Uptime Src-Intf Nbr-Device Num Rx Bw Mbps Slot Unit Slice DSCP QOS Policed Policy-name
----------------------------------------------------------
NBM Flows for VRF 'red'
----------------------------------------------------------
Active Source-Group-Based Flow(s) :
Mcast-Group Src-IP Uptime Src-Intf Nbr-Device Num Rx Bw Mbps Slot Unit Slice DSCP QOS Policed Policy-name
225.1.2.48 10.2.3.2 02:16:27 Eth1/31 gretta-r10-eor2 1 1.001 1 5 0 1 0 Yes pol1
225.1.2.47 10.2.3.2 02:16:27 Eth1/32 gretta-r10-eor2 1 1.500 1 5 0 0 7 Yes Default
225.1.2.46 10.2.3.2 02:16:27 Eth1/32 gretta-r10-eor2 1 2.002 1 5 0 3 0 Yes pol2
225.1.2.45 10.2.3.2 02:16:27 Eth1/31 gretta-r10-eor2 1 1.500 1 5 0 0 7 Yes Default
225.1.2.44 10.2.3.2 02:16:27 Eth1/32 gretta-r10-eor2 1 1.500 1 5 0 0 7 Yes Default
225.1.2.43 10.2.3.2 02:16:27 Eth1/31 gretta-r10-eor2 1 1.500 1 5 0 0 7 Yes Default
225.1.2.42 10.2.3.2 02:16:27 Eth1/32 gretta-r10-eor2 1 1.500 1 5 0 0 7 Yes Default
...
225.1.0.2 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.1 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.24 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.23 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.22 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.21 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.20 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.19 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.18 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.17 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.16 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
225.1.0.15 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.200 0 0 0 11 0 Yes bw10
225.1.0.14 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.200 0 0 0 11 0 Yes bw10
225.1.0.13 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.200 0 0 0 11 0 Yes bw10
225.1.0.12 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.200 0 0 0 11 0 Yes bw10
225.1.0.11 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.200 0 0 0 11 0 Yes bw10
225.1.0.10 10.1.4.2 02:16:48 Vlan100 not-applicable 1 1.500 0 0 0 0 7 Yes Default
...
This example shows sample output for the show nbm host-policy all receiver external vrf all command:
switch# show nbm host-policy all receiver external vrf all
--------------------------------------------------------
VRF 'blue': External Receiver Policy Table
--------------------------------------------------------
Default External Receiver Policy: Deny
-------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
-------------------------------------------------------------------
1 70.20.10.110 228.1.1.1 32 Allow
2 70.20.10.110 228.1.1.0 24 Deny
3 70.20.10.110 228.1.0.0 16 Deny
4 0.0.0.0 228.1.1.0 24 Allow
5 0.0.0.0 228.1.1.2 32 Deny
6 0.0.0.0 227.1.1.0 24 Allow
11 70.20.10.102 229.1.1.2 32 Deny
-------------------------------------------------------------------
Total Policies Found = 7
--------------------------------------------------------
VRF 'default': External Receiver Policy Table
--------------------------------------------------------
Default External Receiver Policy: Allow
-------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
-------------------------------------------------------------------
4096 70.30.1.103 235.1.1.121 32 Allow
4352 70.30.1.104 235.1.1.178 32 Allow
1 70.20.10.110 228.1.1.1 32 Deny
4097 70.30.1.103 235.1.1.122 32 Allow
4353 70.30.1.104 235.1.1.179 32 Allow
...
4094 70.30.1.103 235.1.1.119 32 Allow
4350 70.30.1.104 235.1.1.176 32 Allow
4095 70.30.1.103 235.1.1.120 32 Allow
4351 70.30.1.104 235.1.1.177 32 Allow
-------------------------------------------------------------------
Total Policies Found = 601
This example shows sample output for the show nbm host-policy all receiver local vrf all command:
switch# show nbm host-policy all receiver local vrf all
--------------------------------------------------------
VRF 'blue': Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
Total Policies Found = 0
--------------------------------------------------------
VRF 'blue': Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
Total Policies Found = 0
--------------------------------------------------------
VRF 'default': Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
-----------------------------------------------------------------------------------
Seq Num Source Group Group Mask Reporter Permission
-----------------------------------------------------------------------------------
256 0.0.0.0 228.1.1.246 32 70.30.1.102 Allow
512 0.0.0.0 228.1.2.247 32 70.30.1.102 Allow
768 0.0.0.0 228.1.3.248 32 70.30.1.102 Allow
4864 0.0.0.0 228.1.2.30 32 100.1.1.101 Allow
100096 0.0.0.0 231.1.1.106 32 0.0.0.0 Deny
100352 0.0.0.0 236.1.1.112 32 0.0.0.0 Deny
257 0.0.0.0 228.1.1.247 32 70.30.1.102 Allow
513 0.0.0.0 228.1.2.248 32 70.30.1.102 Allow
769 0.0.0.0 228.1.3.249 32 70.30.1.102 Allow
...
511 0.0.0.0 228.1.2.246 32 70.30.1.102 Allow
767 0.0.0.0 228.1.3.247 32 70.30.1.102 Allow
4863 0.0.0.0 228.1.2.29 32 100.1.1.101 Allow
100095 0.0.0.0 231.1.1.105 32 0.0.0.0 Deny
100351 0.0.0.0 236.1.1.111 32 0.0.0.0 Deny
-----------------------------------------------------------------------------------
Total Policies Found = 1470
This example shows sample output for the show nbm host-policy all sender vrf all command:
switch# show nbm host-policy all sender vrf all
--------------------------------------------------------
VRF 'blue': Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Total Policies Found = 0
--------------------------------------------------------
VRF 'default': Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
----------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
----------------------------------------------------------------------
776 70.20.10.201 234.1.1.1 32 Allow
777 70.20.10.201 234.1.1.2 32 Allow
778 70.20.10.201 234.1.1.3 32 Allow
779 70.20.10.201 234.1.1.4 32 Allow
780 70.20.10.201 234.1.1.5 32 Allow
781 70.20.10.201 234.1.1.6 32 Allow
782 70.20.10.201 234.1.1.7 32 Allow
783 70.20.10.201 234.1.1.8 32 Allow
784 70.20.10.201 234.1.1.9 32 Allow
...
3970 70.20.10.215 234.1.1.195 32 Allow
3971 70.20.10.215 234.1.1.196 32 Allow
3972 70.20.10.215 234.1.1.197 32 Allow
3973 70.20.10.215 234.1.1.198 32 Allow
3974 70.20.10.215 234.1.1.199 32 Allow
3975 70.20.10.215 234.1.1.200 32 Allow
-------------------------------------------------------------------
Total Policies Found = 3000
This example shows sample output for the show nbm host-policy applied receiver external vrf all command:
switch# show nbm host-policy applied receiver external vrf all
--------------------------------------------------------
VRF 'blue': Applied External Receiver Policy Table
--------------------------------------------------------
Default External Receiver Policy: Deny
Applied policy for interface 'ALL':
------------------------------------------------------------------------------------
Seq Num Source Group Group Mask Permission Deny Counter
------------------------------------------------------------------------------------
6 0.0.0.0 227.1.1.0 24 Allow 0
4 0.0.0.0 228.1.1.0 24 Allow 0
5 0.0.0.0 228.1.1.2 32 Deny 1116
11 70.20.10.102 229.1.1.2 32 Deny 0
3 70.20.10.110 228.1.0.0 16 Deny 0
2 70.20.10.110 228.1.1.0 24 Deny 6839
1 70.20.10.110 228.1.1.1 32 Allow 0
------------------------------------------------------------------------------------
Total Policies Found = 7
--------------------------------------------------------
VRF 'default': Applied External Receiver Policy Table
--------------------------------------------------------
Default External Receiver Policy: Allow
Applied policy for interface 'ALL':
------------------------------------------------------------------------------------
Seq Num Source Group Group Mask Permission Deny Counter
------------------------------------------------------------------------------------
5 0.0.0.0 228.1.1.1 32 Deny 0
1 70.20.10.110 228.1.1.1 32 Deny 0
3976 70.30.1.103 235.1.1.1 32 Allow 0
3977 70.30.1.103 235.1.1.2 32 Allow 0
3978 70.30.1.103 235.1.1.3 32 Allow 0
...
4567 70.30.1.105 235.1.1.193 32 Allow 0
4568 70.30.1.105 235.1.1.194 32 Allow 0
4569 70.30.1.105 235.1.1.195 32 Allow 0
4570 70.30.1.105 235.1.1.196 32 Allow 0
4571 70.30.1.105 235.1.1.197 32 Allow 0
4572 70.30.1.105 235.1.1.198 32 Allow 0
4573 70.30.1.105 235.1.1.199 32 Allow 0
4574 70.30.1.105 235.1.1.200 32 Allow 0
------------------------------------------------------------------------------------
Total Policies Found = 601
This example shows sample output for the show nbm host-policy applied receiver local all vrf all command:
switch# show nbm host-policy applied receiver local all vrf all
--------------------------------------------------------
VRF 'blue': Applied Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
Total Policies Found = 0
--------------------------------------------------------
VRF 'default': Applied Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
Applied policy for interface 'Vlan1001':
------------------------------------------------------------------------------------
Seq Num Source Group Group Mask Permission Deny Counter
------------------------------------------------------------------------------------
4831 0.0.0.0 228.1.2.1 32 Allow 0
4836 0.0.0.0 228.1.2.2 32 Allow 0
4837 0.0.0.0 228.1.2.3 32 Allow 0
4838 0.0.0.0 228.1.2.4 32 Allow 0
4839 0.0.0.0 228.1.2.5 32 Allow 0
4840 0.0.0.0 228.1.2.6 32 Allow 0
4841 0.0.0.0 228.1.2.7 32 Allow 0
4842 0.0.0.0 228.1.2.8 32 Allow 0
...
5086 0.0.0.0 228.1.2.252 32 Allow 0
5087 0.0.0.0 228.1.2.253 32 Allow 0
5088 0.0.0.0 228.1.2.254 32 Allow 0
5089 0.0.0.0 228.1.2.255 32 Allow 0
------------------------------------------------------------------------------------
Applied policy for interface 'Wildcard':
------------------------------------------------------------------------------------
Seq Num Source Group Group Mask Permission Deny Counter
------------------------------------------------------------------------------------
10000 0.0.0.0 231.1.0.0 16 Deny 0
10001 0.0.0.0 231.1.1.1 32 Deny 0
10002 0.0.0.0 231.1.1.2 32 Allow 0
100001 0.0.0.0 231.1.1.11 32 Deny 0
100002 0.0.0.0 231.1.1.12 32 Deny 0
100003 0.0.0.0 231.1.1.13 32 Deny 0
...
100440 0.0.0.0 236.1.1.200 32 Deny 0
10300 0.0.0.0 237.1.0.0 16 Deny 0
10301 0.0.0.0 237.1.1.1 32 Allow 0
10401 0.0.0.0 238.1.0.0 16 Deny 0
10402 0.0.0.0 238.1.1.1 32 Allow 0
------------------------------------------------------------------------------------
Total Policies Found = 705
This example shows sample output for the show nbm host-policy applied receiver local interface interface vrf vrf-name command:
switch# show nbm host-policy applied receiver local interface vlan 1001
--------------------------------------------------------
VRF 'blue': Applied Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
Applied policy for interface 'Vlan1001':
------------------------------------------------------------------------------------
Seq Num Source Group Group Mask Permission Deny Counter
------------------------------------------------------------------------------------
4831 0.0.0.0 228.1.2.1 32 Allow 0
4836 0.0.0.0 228.1.2.2 32 Allow 0
4837 0.0.0.0 228.1.2.3 32 Allow 0
4838 0.0.0.0 228.1.2.4 32 Allow 0
4839 0.0.0.0 228.1.2.5 32 Allow 0
4840 0.0.0.0 228.1.2.6 32 Allow 0
4841 0.0.0.0 228.1.2.7 32 Allow 0
...
5087 0.0.0.0 228.1.2.253 32 Allow 0
5088 0.0.0.0 228.1.2.254 32 Allow 0
5089 0.0.0.0 228.1.2.255 32 Allow 0
------------------------------------------------------------------------------------
Total Policies Found = 255
This example shows sample output for the show nbm host-policy applied receiver local wildcard vrf default command:
switch# show nbm host-policy applied receiver local wildcard vrf default
--------------------------------------------------------
VRF 'default': Applied Local Receiver Policy Table
--------------------------------------------------------
Default Local Receiver Policy: Allow
Applied policy for interface 'Wildcard':
------------------------------------------------------------------------------------
Seq Num Source Group Group Mask Permission Deny Counter
------------------------------------------------------------------------------------
10000 0.0.0.0 231.1.0.0 16 Deny 0
10001 0.0.0.0 231.1.1.1 32 Deny 0
10002 0.0.0.0 231.1.1.2 32 Allow 0
100001 0.0.0.0 231.1.1.11 32 Deny 0
100002 0.0.0.0 231.1.1.12 32 Deny 0
100003 0.0.0.0 231.1.1.13 32 Deny 0
100004 0.0.0.0 231.1.1.14 32 Deny 0
100005 0.0.0.0 231.1.1.15 32 Deny 0
100006 0.0.0.0 231.1.1.16 32 Deny 0
...
100439 0.0.0.0 236.1.1.199 32 Deny 0
100440 0.0.0.0 236.1.1.200 32 Deny 0
10300 0.0.0.0 237.1.0.0 16 Deny 0
10301 0.0.0.0 237.1.1.1 32 Allow 0
10401 0.0.0.0 238.1.0.0 16 Deny 0
10402 0.0.0.0 238.1.1.1 32 Allow 0
------------------------------------------------------------------------------------
Total Policies Found = 450
This example shows sample output for the show nbm host-policy applied sender all vrf all command:
switch# show nbm host-policy applied sender all vrf all
--------------------------------------------------------
VRF 'default': Applied Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Total Policies Found = 0
--------------------------------------------------------
VRF 'red': Applied Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Applied policy for interface 'Ethernet1/32':
----------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
----------------------------------------------------------------------
20 10.1.31.10 228.31.1.1 32 Allow
----------------------------------------------------------------------
----------------------------------------------------------------------
Total Policies Found = 1
--------------------------------------------------------
VRF 'blue': Applied Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Applied policy for interface 'Ethernet1/31':
----------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
----------------------------------------------------------------------
10 10.1.31.10 228.31.1.1 32 Allow
11 10.1.31.10 228.31.1.2 32 Allow
12 10.1.31.10 228.31.1.3 32 Allow
13 10.1.31.10 228.31.1.4 32 Allow
----------------------------------------------------------------------
----------------------------------------------------------------------
Total Policies Found = 4
This example shows sample output for the show nbm host-policy applied sender interface interface vrf vrf-name command:
switch# show nbm host-policy applied sender interface e1/31
--------------------------------------------------------
VRF 'blue': Applied Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Applied policy for interface 'Ethernet1/31':
----------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
----------------------------------------------------------------------
10 10.1.31.10 228.31.1.1 32 Allow
11 10.1.31.10 228.31.1.2 32 Allow
12 10.1.31.10 228.31.1.3 32 Allow
13 10.1.31.10 228.31.1.4 32 Allow
----------------------------------------------------------------------
----------------------------------------------------------------------
Total Policies Found = 4
This example shows sample output for the show nbm host-policy applied sender wildcard vrf all command:
switch# show nbm host-policy applied sender wildcard vrf all
--------------------------------------------------------
VRF 'default': Applied Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Total Policies Found = 0
--------------------------------------------------------
VRF 'red': Applied Sender Policy Table
--------------------------------------------------------
Default Sender Policy: Allow
Applied policy for interface 'Wildcard':
----------------------------------------------------------------------
Seq Num Source Group Group Mask Permission
----------------------------------------------------------------------
10 0.0.0.0 228.1.10.1 32 Allow
20 0.0.0.0 228.1.20.1 32 Deny
30 0.0.0.0 228.1.30.1 32 Deny
40 0.0.0.0 228.1.40.1 32 Deny
50 0.0.0.0 228.1.50.1 32 Allow
----------------------------------------------------------------------
Total Policies Found = 5
This example shows sample output for the show nbm flows static command when static flow provisioning is enabled:
switch# show nbm flows static |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| NBM Static API Flow Table for VRF default |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| Provisioned Static Flows |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| Source | Group | Ingress Intf | BW (in Kbps) | Policed | Is LHR | Egress Intf | Fault Reason |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| 10.1.103.10 | 231.1.1.1 | Vlan103 | 1000000 | Yes | | | None |
| | | | | | YES | Vlan104 | None |
| | | | | | YES | Vlan105 | None |
| | | | | | NO | Ethernet1/64 | None |
This example shows sample output for the show nbm flows static group command when static flow provisioning is enabled. The Fault Reason column shows the reason for any errors that occur.
switch# show nbm flows static group 231.1.1.2
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| NBM Static API Flow Table for VRF default |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| Provisioned Static Flows |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| Source | Group | Ingress Intf | BW (in Kbps) | Policed | Is LHR | Egress Intf | Fault Reason |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
| 10.1.103.10 | 231.1.1.2 | Vlan103 | 1000000 | Yes | | | None |
| | | | | | YES | Vlan104 | Intf down |
| | | | | | YES | Vlan105 | None |
| | | | | | NO | Ethernet1/64 | None |
+-----------------------------------------------------------------------------------------------------------------------------------------------+
This example shows sample output for the show running-config nbm command:
switch# show running-config nbm
!Command: show running-config nbm
!Running configuration last done at: Fri Mar 29 05:21:38 2019
!Time: Fri Mar 29 10:09:24 2019
version 9.3(1) Bios:version 08.35
feature nbm
nbm mode pim-active
nbm host-policy
sender
default permit
receiver
default permit
pim
default permit
nbm reserve unicast fabric bandwidth 2
nbm flow asm range 225.0.0.0/8 234.80.0.0/16 232.6.0.0/16 233.80.0.0/16
nbm flow asm range 235.6.0.0/16 239.80.0.0/16 227.0.0.0/8 238.80.0.0/16
nbm flow asm range 238.100.0.0/16 239.100.0.0/16
nbm flow bandwidth 1002 kbps
nbm flow-policy
policy v2.leaf1.1.225.50
bandwidth 1001 kbps
dscp 26
ip group-range 225.50.1.6 to 225.50.1.10
policy v2.leaf1.1.225.80
bandwidth 1001 kbps
dscp 24
ip group-range 225.80.1.1 to 225.80.1.5
nbm vrf mars
nbm mode pim-active
nbm host-policy
sender
default permit
receiver
default permit
pim
default permit
nbm reserve unicast fabric bandwidth 1
nbm flow asm range 225.0.0.0/8 227.0.0.0/8 234.80.0.0/16 233.80.0.0/16
nbm flow asm range 235.6.0.0/16 239.80.0.0/16 232.6.0.0/16 238.80.0.0/16
nbm flow asm range 238.100.0.0/16 239.100.0.0/16
nbm flow bandwidth 1004 kbps
nbm flow-policy
policy static.v2.leaf3.1.238.80
bandwidth 1001 kbps
dscp 35
ip group-range 238.80.1.1 to 238.80.1.5
policy static.v2.leaf4.1.239.80
bandwidth 1001 kbps
dscp 35
ip group-range 239.80.1.1 to 239.80.1.5
nbm flow-definition 233.80.1.1 0.0.0.0
egress-interface eth6/20/3
egress-interface vlan851
stage-flow
egress-host 21.7.1.2
nbm flow-definition 233.80.1.2 0.0.0.0
egress-interface eth6/20/3
stage-flow
egress-host 21.7.1.2