Cisco HX240c M4 HyperFlex Node Installation Guide

Node Specifications

This appendix lists the technical specifications for the node and includes the following sections:

Table A-1 lists the physical specifications for the node.

Table A-1 Physical Specifications
Description	Specification
Height	3.4 in. (8.70 cm)
Width (including slam latches)	19.0 in. (48.26 cm)
Depth (length) Depth, including slam latches and power supply handles	29.0 in. (73.70 cm) 31.5 in. (80.00 cm)
Maximum Weight (fully loaded)	62.7 lb. (28.4 Kg)

The power specifications for the four power supply options are listed in the following sections:

You can get more specific power information for your exact node configuration by using the Cisco UCS Power Calculator:

Table A-2 lists the specifications for each 650 W AC power supply
(Cisco part number UCSC-PSU2V2-650W=).

Table A-2 Power Supply Specifications
Description	Specification
AC input voltage	Nominal range: 100–120 VAC, 200–240 VAC (Range: 90–132 VAC, 180–264 VAC)
AC input frequency	Nominal range: 50 to 60Hz (Range: 47–63 Hz)
Maximum AC input current	7.6 A at 100 VAC 3.65 A at 208 VAC
Maximum input volt-amperes	760 VA at 100 VAC
Maximum output power per PSU	650 W
Maximum inrush current	35 A (sub-cycle duration)
Maximum hold-up time	12 ms at 650 W
Power supply output voltage	12 VDC
Power supply standby voltage	3.3 VDC
Efficiency rating	Climate Savers Platinum Efficiency (80Plus Platinum certified)
Form factor	RSP1
Input connector	IEC320 C14

Table A-3 lists the specifications for each 1200 W AC power supply
(Cisco part number UCSC-PSU2V2-1200W=).

Table A-3 Power Supply Specifications
Description	Specification
AC input voltage	Nominal range: 100–120 VAC, 200–240 VAC (Range: 90–132 VAC, 180–264 VAC)
AC input frequency	Nominal range: 50 to 60Hz (Range: 47–63 Hz)
Maximum AC input current	11 A at 100 VAC 7 A at 200 VAC
Maximum input volt-amperes	1456 VA
Maximum output power per PSU	800 W at 100–120 VAC 1200 W at 200–240 VAC
Maximum inrush current	35 A (sub-cycle duration)
Maximum hold-up time	12 ms at 1200 W
Power supply output voltage	12 VDC
Power supply standby voltage	12 VDC
Efficiency rating	Climate Savers Platinum Efficiency (80Plus Platinum certified)
Form factor	RSP1
Input connector	IEC320 C14

Table A-4 lists the specifications for each 1400 W AC power supply
(Cisco part number UCSC-PSU2-1400=).

Table A-4 1400 W Power Supply Specifications
Description	Specification
AC input voltage	Nominal range: 200–240 VAC (Range: 180–264 VAC)
AC input frequency	Nominal range: 50 to 60Hz (Range: 47–63 Hz)
Maximum AC input current	8.5 A at 200 VAC
Maximum input volt-amperes	1700 VA
Maximum output power per PSU	1400 W at 200–240 VAC
Maximum inrush current	35 A (sub-cycle duration)
Maximum hold-up time	12 ms at 1200 W
Power supply output voltage	12 VDC
Power supply standby voltage	12 VDC
Efficiency rating	Climate Savers Platinum Efficiency (80Plus Platinum certified)
Form factor	RSP1
Input connector	IEC320 C14

Table A-5 lists the specifications for each 930 W DC power supply
(Cisco part number UCSC-PSU-930WDC=).

Table A-5 930 W DC Power Supply Specifications
Description	Specification
DC input voltage range	Nominal range: –48 to –60 VDC nominal (Range: –40 to –60 VDC)
Maximum DC input current	23 A at –48 VDC
Maximum input W	1104 W
Maximum output power per PSU	930 W
Maximum inrush current	35 A (sub-cycle duration)
Maximum hold-up time	8 ms at 930 W
Power supply output voltage	12 VDC
Power supply standby voltage	12 VDC
Efficiency rating	> 92% at 50% load
Form factor	RSP1 (2U and 4U systems)
Input connector	Removable connector block UCSC-CONN-930WDC=

Table A-6 lists the environmental specifications for the node.

Table A-6 Environmental Specifications
Description	Specification
Temperature, operating	41 to 95°F (5 to 35°C) Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level.
Temperature, nonoperating (when the node is in storage or is transported)	–40 to 149°F (–40 to 65°C)
Humidity (RH), operating	10 to 90%
Humidity, non-operating	5 to 93%
Altitude, operating	0 to 10,000 feet
Altitude, nonoperating (when the node is in storage or is transported)	0 to 40,000 feet
Sound power level Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C)	5.8
Sound pressure level Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C)	43