To display the current version of FPD images on the Ethernet Line Cards installed on your router, use the show hw-module slot-number / subslot-number | all ] fpd command, where
slot-number is the slot number where the Ethernet Line Card is installed, and subslot-number
is the number of the Ethernet Line Card subslot where a target Ethernet Line Card is located. Entering the all keyword shows information pertaining to the hardware in all the router slots.
The following examples show the output when the show command is used.
The following sample shows that FPD versions on the Ethernet Line Cards in the system meet the minimum requirements.
For ASR1000-2T+20X1GE:
Router# show hw-module subslot all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
3/0 BUILT-IN-2T+20X1GE 1.0 22-DB FPGA 1.13 1.13
==== ====================== ====== =============================================
For ASR1000-6TGE:
Router# show hw-module subslot all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
3/0 BUILT-IN-6TGE 0.3 22-DB FPGA 1.9 1.8
==== ====================== ====== =============================================
This example shows the output when using the slot-number/ subslot-number
argument to identify a particular Ethernet Line Card:
Router# show hw-module subslot 1/0 fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
1/0 BUILT-IN-2T+20X1GE 1.0 22-DB FPGA 1.13 1.13
==== ====================== ====== =============================================
The output display in this example shows that the Shared Port Adapter in subslot 0/1 is disabled because one of the programmable
devices does not meet the minimum version requirements:
Router# show hw-module all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
Slot Card Type Ver. Device: "ID-Name" Version Version
==== ====================== ====== ================== =========== ==============
0/0 SPA-4XOC3-POS 1.0 1-I/O FPGA 3.4 3.4
---- ---------------------- ------ ------------------ ----------- --------------
0/1 SPA-2XT3/E3 <DISABLED> 1.0 1-ROMMON 2.12 2.12
2-I/O FPGA 0.6 1.0 *
3-E3 FPGA 1.0 1.4 *
4-T3 FPGA 1.0 1.4 *
---- ---------------------- ------ ------------------ ----------- --------------
0/2 SPA-1X10GE-L-V2 1.0 1-10GE I/O FPGA 1.9 1.9
---- ---------------------- ------ ------------------ ----------- --------------
0/3 SPA-1X10GE-L-V2 1.0 1-10GE I/O FPGA 1.9 1.9
==== ====================== ====== =============================================
NOTES:
- FPD images that are required to be upgraded are indicated with a '*'
character in the "Minimal Required Version" field.
- The following FPD image package file is required for the upgrade:
asr1000-fpd-bundle.pkg
==== ====================== ====== =============================================