Using the IEEE 802.3ad Link Aggregation MIB

The IEEE 802.3ad Link Aggregation Control Protocol (LACP) enables the bundling of physical interfaces on a physical device to achieve more bandwidth than is available using a single interface. This feature introduces IEEE 802.3ad Link Aggregation (LAG) MIB support in Cisco IOS XE software. The LAG MIB supports the management of interfaces and ports that are part of an LACP port channel and is accessed by a Simple Network Management Protocol (SNMP) manager application.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/. An account on Cisco.com is not required.

Prerequisites for Using the IEEE 802.3ad Link Aggregation MIB

  • Link aggregation must be configured using the LACP command-line interface (CLI) commands before the MIB tables can be accessed.

  • LACP must be supported in the image.

Information About Using the IEEE 802.3ad Link Aggregation MIB

IEEE 802.3ad LAG MIB

The IEEE 802.3ad LAG MIB supports the management of interfaces and ports that are part of an LACP port channel. No specific commands are used to enable the MIB; access is through an SNMP manager application. For information about using SNMP in Cisco IOS XE software, see the “Configuring SNMP Support” chapter of the Cisco IOS XE Network Management Configuration Guide, Release 2.

Configuration and Management of LACP bundles

To use the LAG MIB, it is important to know how LACP bundles are configured and managed. For more information about LACP bundles, see the "Configuring IEEE 802.3ad Link Bundling" feature guide.

LAG MIB Table Object Definitions

This section lists the MIB objects and tables that are supported as part of this feature.

dot3adTablesLastChanged Object

The dot3adTablesLastChanged object indicates the time of the most recent change to the dot3adAggTable, dot3adAggPortListTable, or dot3adAggPortTable.

dot3adAggTable

The dot3adAggTable (Aggregator Configuration table) contains information about every aggregator that is associated with a system. Each LACP channel in a device occupies an entry in the dot3adAggTable. Some objects in the table have restrictions, which are described with the object. The objects are described in the table below.

Table 1. Aggregator Configuration Table Objects

Object

Maximum Access/Description

dot3adAggActorAdminKey

Cannot be changed via the SET operation.

dot3adAggActorOperKey

Write access not supported.

dot3adAggActorSystemID

Write access not supported.

dot3adAggActorSystemPriority

Write access not supported.

dot3adAggAggregateOrIndividual

Returns a value of TRUE if more than 1 port is configured in the channel; otherwise, returns a value of FALSE.

dot3adAggCollectorMaxDelay

Cannot be changed via the SET operation.

dot3adAggIndex

Write access not supported.

dot3adAggMACAddress

Write access not supported.

dot3adAggPartnerOperKey

Write access not supported.

dot3adAggPartnerSystemID

Write access not supported.

dot3adAggPartnerSystemPriority

Write access not supported.

dot3adAggPortListTable

The dot3adAggPortListTable (Aggregation Port List table) contains a list of all the ports associated with each aggregator. Each LACP channel in a device occupies an entry in the table. The objects are described in the table below.

Table 2. Aggregation Port List Table Objects

Object

Maximum Access/Description

dot3adAggPortListPorts

Write access not supported.

dot3adAggPortTable

The dot3adAggPortTable (Aggregation Port table) contains LACP configuration information about every aggregation port associated with a device. Each physical port in a device occupies an entry in the dot3adAggPortTable. The objects are described in the table below.

Table 3. Aggregation Port Table Objects

Object

Maximum Access/Description

dot3adAggPortActorAdminKey

Write access not supported.

dot3adAggPortActorAdminState

Write access not supported.

dot3adAggPortActorOperKey

Read-only access supported.

dot3adAggPortActorOperState

Write access not supported.

dot3adAggPortActorPort

Write access not supported.

dot3adAggPortActorPortPriority

Write access not supported.

dot3adAggPortActorSystemID

Write access not supported.

dot3adAggPortActorSystemPriority

Write access not supported.

dot3adAggPortAggregateOrIndividual

Indicates whether a port is attached to an LACP channel. If the port is attached to an LACP channel and the value of the dot3adAggPortAttachedAggID object in the same row is not zero, the value of this object is TRUE. Otherwise, the value is FALSE.

dot3adAggPortAttachedAggID

Write access not supported.

dot3adAggPortIndex

Write access not supported.

dot3adAggPortPartnerAdminKey

Cannot be changed via the SET operation.

dot3adAggPortPartnerAdminPort

Cannot be changed via the SET operation.

dot3adAggPortPartnerAdminPortPriority

Write access not supported.

dot3adAggPortPartnerAdminState

Cannot be changed via the SET operation.

dot3adAggPortPartnerAdminSystemID

Cannot be changed via the SET operation.

dot3adAggPortPartnerAdminSystemPriority

Cannot be changed via the SET operation.

dot3adAggPortPartnerOperKey

Write access not supported.

dot3adAggPortPartnerOperPort

Cannot be changed via the SET operation.

dot3adAggPortPartnerOperPortPriority

Write access not supported.

dot3adAggPortPartnerOperState

Write access is not supported.

dot3adAggPortPartnerOperSystemID

Write access not supported.

dot3adAggPortPartnerOperSystemPriority

Write access not supported.

dot3adAggPortSelectedAggID

Write access not supported.

dot3adAggPortStatsTable

The dot3adAggPortStatsTable (LACP Statistics table) contains link aggregation information about every port that is associated with a device. Each physical port occupies a row in the table. The objects are described in the table below.

Table 4. LACP Statistics Table Objects

Object

Maximum Access/Description

dot3adAggPortStatsIllegalRx

Write access not supported.

dot3adAggPortStatsLACPDUsRx

Write access not supported.

dot3adAggPortStatsLACPDUsTx

Write access not supported.

dot3adAggPortStatsMarkerPDUsRx

Write access not supported.

dot3adAggPortStatsMarkerPDUsTx

Write access not supported.

dot3adAggPortStatsMarkerResponsePDUsRx

Write access not supported.

dot3adAggPortStatsMarkerResponsePDUsTx

Write access not supported.

dot3adAggPortStatsUnknownRx

Write access not supported.

Additional References

Related Documents

Related Topic

Document Title

Link aggregation configuration tasks

"Configuring IEEE 802.3ad Link Bundling" feature guide

Cisco IOS XE LACP commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples

Cisco IOS Carrier Ethernet Command Reference

Configuring SNMP

“Configuring SNMP Support” chapter of the Cisco IOS XE Network Management Configuration Guide, Release 2

Cisco IOS XE SNMP commands: complete command syntax, command mode, command history, defaults, usage guidelines, and examples

Cisco IOS Network Management Command Reference

Standards

Standard

Title

IEEE 802.3ad

IEEE 802.3ad-2000 Link Aggregation

MIBs

MIB

MIBs Link

  • IEEE 802.3ad MIB

  • IF MIB

To locate and download MIBs for selected platforms, Cisco software releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs

RFCs

RFC

Title

No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature

--

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for Using the IEEE 802.3ad Link Aggregation MIB

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 5. Feature Information for Using the IEEE 802.3ad Link Aggregation MIB

Feature Name

Releases

Feature Information

IEEE 802.3ad MIB

Cisco IOS XE Release 2.5

This feature introduces LAG MIB support in Cisco IOS XE software. The LAG MIB supports the management of interfaces and ports that are part of an LACP port channel and is accessed by an SNMP manager application.

This feature uses no commands.