Flexible NetFlow - MPLS Support

The Flexible NetFlow - MPLS Support feature supports the monitoring of the following MPLS-related fields:

  • MPLS Labels 1-6 (3 bytes -- 20 bits of label, 3 bits of EXP, 1 bit of EOS).
  • Top Label EXP i.e. the EXP field for label 1.
  • Top Label TTL i.e. the TTL field for label 1.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Information About Flexible NetFlow MPLS Support

Flexible NetFlow—MPLS Support Overview

This feature enables collecting MPLS label IDs by applying a flow monitor having a flow record that collects the MPLS label IDs as key or nonkey fields.

How to Configure Flexible NetFlow MPLS Support

Configuring a Flow Exporter for the Flow Monitor

Perform this optional task to configure a flow exporter for the flow monitor in order to export the data that is collected by Flexible NetFlow to a remote system for further analysis and storage.

Flow exporters are used to send the data that you collect with Flexible NetFlow to a remote system such as a NetFlow Collection Engine. Exporters use UDP as the transport protocol and use the Version 9 export format.


Note

Each flow exporter supports only one destination. If you want to export the data to multiple destinations, you must configure multiple flow exporters and assign them to the flow monitor.

You can export to a destination using either an IPv4 or IPv6 address.

SUMMARY STEPS

    1.    enable

    2.    configure terminal

    3.    flow exporter exporter-name

    4.    description description

    5.    destination {hostname | ip-address} [vrf vrf-name]

    6.    export-protocol {netflow-v5 | netflow-v9 | ipfix}

    7.    transport udp udp-port

    8.    exit

    9.    flow monitor flow-monitor-name

    10.    exporter exporter-name

    11.    end

    12.    show flow exporter exporter-name

    13.    show running-config flow exporter exporter-name


DETAILED STEPS
      Command or Action Purpose
    Step 1 enable


    Example: 
    Device> enable
     

    Enables privileged EXEC mode.

    • Enter your password if prompted.
     
    Step 2 configure terminal


    Example: 
    Device# configure terminal
     

    Enters global configuration mode.

     
    Step 3 flow exporter exporter-name


    Example: 
    Device(config)# flow exporter EXPORTER-1
     

    Creates a flow exporter and enters Flexible NetFlow flow exporter configuration mode.

    • This command also allows you to modify an existing flow exporter.
     
    Step 4 description description


    Example: 
    Device(config-flow-exporter)# description Exports to datacenter
     

    (Optional) Creates a description for the flow exporter.

     
    Step 5 destination {hostname | ip-address} [vrf vrf-name]


    Example: 
    Device(config-flow-exporter)# destination 172.16.10.2
     

    Specifies the hostname or IP address of the system to which the exporter sends data.

    Note   

    You can export to a destination using either an IPv4 or IPv6 address.

     
    Step 6 export-protocol {netflow-v5 | netflow-v9 | ipfix}


    Example: 
    Device(config-flow-exporter)# export-protocol netflow-v9
     

    Specifies the version of the NetFlow export protocol used by the exporter.

    • Default: netflow-v9.
     
    Step 7 transport udp udp-port


    Example: 
    Device(config-flow-exporter)# transport udp 65
     

    Configures UDP as the transport protocol and specifies the UDP port on which the destination system is listening for exported Flexible NetFlow traffic.

     
    Step 8 exit


    Example: 
    Device(config-flow-exporter)# exit
     

    Exits Flexible NetFlow flow exporter configuration mode and returns to global configuration mode.

     
    Step 9 flow monitor flow-monitor-name


    Example: 
    Device(config)# flow monitor FLOW-MONITOR-1
     

    Enters Flexible NetFlow flow monitor configuration mode for the flow monitor that you created previously.

     
    Step 10 exporter exporter-name


    Example: 
    Device(config-flow-monitor)# exporter EXPORTER-1
     

    Specifies the name of an exporter that you created previously.

     
    Step 11 end


    Example: 
    Device(config-flow-monitor)# end
     

    Exits Flexible NetFlow flow monitor configuration mode and returns to privileged EXEC mode.

     
    Step 12 show flow exporter exporter-name


    Example: 
    Device# show flow exporter FLOW_EXPORTER-1
     

    (Optional) Displays the current status of the specified flow exporter.

     
    Step 13 show running-config flow exporter exporter-name


    Example: 
    Device<# show running-config flow exporter FLOW_EXPORTER-1
     

    (Optional) Displays the configuration of the specified flow exporter.

     

    Creating a Customized Flow Monitor

    Perform this required task to create a customized flow monitor.

    Each flow monitor has a separate cache assigned to it. Each flow monitor requires a record to define the contents and layout of its cache entries.

    Before You Begin

    If you want to use a customized record instead of using one of the Flexible NetFlow predefined records, you must create the customized record before you can perform this task.

    If you want to add a flow exporter to the flow monitor for data export, you must create the exporter before you can complete this task.


    Note

    You must use the no ip flow monitor command to remove a flow monitor from all of the interfaces to which you have applied it before you can modify the parameters for the record command on the flow monitor. For information about the ip flow monitor command, refer to the Cisco IOS Flexible NetFlow Command Reference.

    SUMMARY STEPS

      1.    enable

      2.    configure terminal

      3.    flow monitor monitor-name

      4.    description description

      5.    record {record-name | netflow-original | netflow {ipv4 | ipv6} record [peer]}

      6.    cache {entries number | timeout {active | inactive | update} seconds | type {immediate | normal | permanent}}

      7.    Repeat Step 6 as required to finish modifying the cache parameters for this flow monitor.

      8.    statistics packet protocol

      9.    statistics packet size

      10.    exporter exporter-name

      11.    end

      12.    show flow monitor [[name] monitor-name [cache [format {csv | record | table}]] [statistics]]

      13.    show running-config flow monitor monitor-name


    DETAILED STEPS
        Command or Action Purpose
      Step 1 enable


      Example: 
      Device> enable
       

      Enables privileged EXEC mode.

      • Enter your password if prompted.
       
      Step 2 configure terminal


      Example: 
      Device# configure terminal
       

      Enters global configuration mode.

       
      Step 3 flow monitor monitor-name


      Example: 
      Device(config)# flow monitor FLOW-MONITOR-1
       

      Creates a flow monitor and enters Flexible NetFlow flow monitor configuration mode.

      • This command also allows you to modify an existing flow monitor.
       
      Step 4 description description


      Example: 
      Device(config-flow-monitor)# description Used for basic ipv4 traffic analysis
       

      (Optional) Creates a description for the flow monitor.

       
      Step 5 record {record-name | netflow-original | netflow {ipv4 | ipv6} record [peer]}


      Example: 
      Device(config-flow-monitor)# record FLOW-RECORD-1
       

      Specifies the record for the flow monitor.

       
      Step 6 cache {entries number | timeout {active | inactive | update} seconds | type {immediate | normal | permanent}}


      Example: 
      Device(config-flow-monitor)# cache type normal
       

      (Optional) Modifies the flow monitor cache parameters such as timeout values, number of cache entries, and the cache type.

      • The values for the keywords associated with the timeout keyword have no effect when the cache type is set to immediate.
       
      Step 7 Repeat Step 6 as required to finish modifying the cache parameters for this flow monitor.  

      —

       
      Step 8 statistics packet protocol


      Example: 
      Device(config-flow-monitor)# statistics packet protocol
       

      (Optional) Enables the collection of protocol distribution statistics for Flexible NetFlow monitors.

       
      Step 9 statistics packet size


      Example: 
      Device(config-flow-monitor)# statistics packet size
       

      (Optional) Enables the collection of size distribution statistics for Flexible NetFlow monitors.

       
      Step 10 exporter exporter-name


      Example: 
      Device(config-flow-monitor)# exporter EXPORTER-1
       

      (Optional) Specifies the name of an exporter that was created previously.

       
      Step 11 end


      Example: 
      Device(config-flow-monitor)# end
       

      Exits Flexible NetFlow flow monitor configuration mode and returns to privileged EXEC mode.

       
      Step 12 show flow monitor [[name] monitor-name [cache [format {csv | record | table}]] [statistics]]


      Example: 
      Device# show flow monitor FLOW-MONITOR-2 cache
       

      (Optional) Displays the status and statistics for a Flexible NetFlow flow monitor.

       
      Step 13 show running-config flow monitor monitor-name


      Example: 
      Device# show running-config flow monitor FLOW_MONITOR-1
       

      (Optional) Displays the configuration of the specified flow monitor.

       

      Applying a Flow Monitor to an Interface

      Before it can be activated, a flow monitor must be applied to at least one interface. Perform this required task to activate a flow monitor.

      SUMMARY STEPS

        1.    enable

        2.    configure terminal

        3.    interface type number

        4.    {ip | ipv6} flow monitor monitor-name {input | output}

        5.    Repeat Steps 3 and 4 to activate a flow monitor on any other interfaces in the device over which you want to monitor traffic.

        6.    end

        7.    show flow interface type number

        8.    show flow monitor name monitor-name cache format record


      DETAILED STEPS
          Command or Action Purpose
        Step 1 enable


        Example: 
        Device> enable
         

        Enables privileged EXEC mode.

        • Enter your password if prompted.
         
        Step 2 configure terminal


        Example: 
        Device# configure terminal
         

        Enters global configuration mode.

         
        Step 3 interface type number


        Example: 
        Device(config)# interface GigabitEthernet 0/0/0
         

        Specifies an interface and enters interface configuration mode.

         
        Step 4 {ip | ipv6} flow monitor monitor-name {input | output}

        Example: 
        Device(config-if)# ip flow monitor FLOW-MONITOR-1 input
         

        Activates a flow monitor that was created previously by assigning it to the interface to analyze traffic.

         
        Step 5 Repeat Steps 3 and 4 to activate a flow monitor on any other interfaces in the device over which you want to monitor traffic.  

        —

         
        Step 6 end


        Example: 
        Device(config-if)# end
         

        Exits interface configuration mode and returns to privileged EXEC mode.

         
        Step 7 show flow interface type number


        Example: 
        Device# show flow interface GigabitEthernet 0/0/0
         

        Displays the status of Flexible NetFlow (enabled or disabled) on the specified interface.

         
        Step 8 show flow monitor name monitor-name cache format record


        Example: 
        Device# show flow monitor name FLOW_MONITOR-1 cache format record
         

        Displays the status, statistics, and flow data in the cache for the specified flow monitor.

         

        Configuration Examples for Flexible NetFlow MPLS Support

        Example: Configuring Flexible NetFlow for MPLS Support

        The following example shows how to configure a flow monitor using the Flexible NetFlow "BGP ToS next-hop" predefined record to monitor IPv4 traffic.

        This sample starts in global configuration mode: 

        !
flow record mpls_1
match mpls label 1 details
match mpls label 1 exp
match mpls label 1 ttl
match mpls label 2 details
match mpls label 3 details
match mpls label 4 details
match mpls label 5 details
match mpls label 6 details
collect mpls label 1 details
collect mpls label 1 exp
collect mpls label 1 ttl
collect mpls label 2 details
collect mpls label 3 details
collect mpls label 4 details
collect mpls label 5 details
collect mpls label 6 details
!
flow monitor mpls_1
record mpls_1
!
interface Ethernet 0/0
 mpls flow monitor mpls_1 input
 mpls flow monitor mpls_1 output
!

        Additional References

        Related Documents

        Related Topic

        Document Title

        Cisco IOS commands

        Cisco IOS Master Command List, All Releases

        Flexible NetFlow conceptual information and configuration tasks

        Flexible NetFlow Configuration Guide

        Flexible NetFlow commands

        Cisco IOS Flexible NetFlow Command Reference

        Standards/RFCs

        Standard

        Title

        No new or modified standards/RFCs are supported by this feature.

        —

        MIBs

        MIB

        MIBs Link

        None

        To locate and download MIBs for selected platforms, Cisco software releases, and feature sets, use Cisco MIB Locator found at the following URL:

        http:/​/​www.cisco.com/​go/​mibs

        Technical Assistance

        Description

        Link

        The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

        http:/​/​www.cisco.com/​cisco/​web/​support/​index.html

        Feature Information for Flexible NetFlow: MPLS Support

        The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

        Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

        Table 1 Feature Information for Flexible NetFlow: MPLS Support

        Feature Name

        Releases

        Feature Information

        Flexible NetFlow: MPLS Support

        Cisco IOS XE Release 3.9S

        Enables collecting MPLS label IDs by applying a flow monitor having a flow record that collects the MPLS label IDs as key or nonkey fields.

        The following commands were introduced or modified: collect mplslabel, match mplslabel, mpls flow monitor.