HTTPS--HTTP Server and Client with SSL 3.0

The HTTPS--HTTP Server and Client with SSL 3.0 feature provides Secure Socket Layer (SSL) version 3.0 support for the HTTP 1.1 server and HTTP 1.1 client within Cisco IOS XE software. SSL provides server authentication, encryption, and message integrity to allow secure HTTP communications. SSL also provides HTTP client authentication. HTTP over SSL is abbreviated as HTTPS.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/​go/​cfn. An account on Cisco.com is not required.

Information About HTTPS--HTTP Server and Client with SSL 3.0

To configure the HTTP with SSL 3.0 (HTTPS) feature, you should understand the following concepts:

Secure HTTP Server and Secure HTTP Client

A secure HTTP connection means that data sent to and received from an HTTP server are encrypted before being sent out over the Internet. HTTP with SSL encryption provides a secure connection to allow such functions as configuring a router from a web browser. Cisco’s implementation of the secure HTTP server and secure HTTP client uses an implementation of the SSL version 3.0. Application layer encryption provides an alternative to older methods such as having to set up a tunnel to the HTTP server for remote management. HTTP over SSL is abbreviated as HTTPS; the URL of a secure connection will begin with https:// instead of http://.

The Cisco IOS XE HTTP secure server’s primary role is to listen for HTTPS requests on a designated port (the default HTTPS port is 443) and to pass the request to the HTTP 1.1 web server. The HTTP 1.1 server processes requests and passes responses (served pages) back to the HTTP secure server, which, in turn, responds to the original request.

The Cisco IOS XE HTTP secure client’s primary role is to respond to Cisco IOS XE application requests for HTTPS User Agent services, perform HTTPS User Agent services on the application’s behalf, and pass the response back to the application.

Certificate Authority Trustpoints

Certificate authorities (CAs) are responsible for managing certificate requests and issuing certificates to participating IPSec network devices. These services provide centralized security key and certificate management for the participating devices. Specific CA servers are referred to as “trustpoints.”

The HTTPS server provides a secure connection by providing a certified X.509v3 certificate to the client when a connection attempt is made. The certified X.509v3 certificate is obtained from a specified CA trustpoint. The client (usually a web browser), in turn, has a public key that allows it to authenticate the certificate.

Configuring a CA trustpoint is highly recommended for secure HTTP connections. However, if a CA trustpoint is not configured for the routing device running the HTTPS server, the server will certify itself and generate the needed RSA key pair. Because a self-certified (self-signed) certificate does not provide adequate security, the connecting client will generate a notification that the certificate is self-certified, and the user will have the opportunity to accept or reject the connection. This option is available for internal network topologies (such as testing).

The HTTPS--HTTP Server and Client with SSL 3.0 feature also provides an optional command (ip http secure-client-auth) that, when enabled, has the HTTPS server request an X.509v3 certificate from the client. Authenticating the client provides more security than server authentication by itself.

For additional information on certificate authorities, see the “Configuring Certification Authority Interoperability” chapter in the Cisco IOS XE Security Configuration Guide .

CipherSuites

A CipherSuite specifies the encryption algorithm and digest algorithm to use on an SSL connection. Web browsers offer a list of supported CipherSuites when connecting to the HTTPS server, and the client and server will negotiate the best encryption algorithm to use from those that are supported by both. For example, Netscape Communicator 4.76 supports U.S. security with RSA Public Key Cryptography, MD2, MD5, RC2-CBC, RC4, DES-CBC, and DES-EDE3-CBC.

For the best possible encryption, you should use a browser that supports 128-bit encryption, such as Microsoft Internet Explorer version 5.5 (or later), or Netscape Communicator version 4.76 (or later). The SSL_RSA_WITH_DES_CBC_SHA CipherSuite provides less security than the other CipherSuites, because it does not offer 128-bit encryption.

In terms of router processing load (speed), the following list ranks the CipherSuites from fastest to slowest (slightly more processing time is required for the more secure and more complex CipherSuites):

  1. SSL_RSA_WITH_DES_CBC_SHA

  2. SSL_RSA_WITH_RC4_128_MD5

  3. SSL_RSA_WITH_RC4_128_SHA

  4. SSL_RSA_WITH_3DES_EDE_CBC_SHA

How to Configure the HTTPS--HTTP Server and Client with SSL 3.0

Declaring a Certificate Authority Trustpoint

Configuring a CA trustpoint is highly recommended for secure HTTP connections. The certified X.509v3 certificate for the secure HTTP server (or client) is obtained from the specified CA trustpoint. If you do not declare a CA trustpoint, then a self-signed certificate will be used for secure HTTP connections. The self-signed certificate is generated automatically.

SUMMARY STEPS

    1.    enable

    2.    configure terminal

    3.    hostname name

    4.    ip domain-name name

    5.    crypto key generate rsa usage-keys

    6.    crypto ca trustpoint name

    7.    enrollment url url

    8.    enrollment http-proxy host-name port-number

    9.    crl {query url | optional | best-effort}

    10.    primary

    11.    exit

    12.    crypto ca authenticate name

    13.    crypto ca enrollment name

    14.    Do one of the following:

    • copy running-config startup-config
    • copy system:running-config nvram:startup-config


DETAILED STEPS
     Command or ActionPurpose
    Step 1 enable


    Example: 
    Device> enable
     

    Enables privileged EXEC mode.

    • Enter your password if prompted.

     
    Step 2 configure terminal


    Example: 
    Device# configure terminal
     

    Enters global configuration mode.

     
    Step 3 hostname name


    Example: 
    Device(config)# hostname Router
     

    Specifies the hostname of the Device.

    • This step is needed only if you have not previously configured a hostname for your Device. The hostname is required because a fully qualified domain name is needed for security keys and certificates.

     
    Step 4 ip domain-name name


    Example: 
    Device(config)# ip domain-name example.com
     

    Specifies the IP domain name of the Device.

    • This step is needed only if you have not previously configured an IP domain name for your Device. The domain name is required because a fully qualified domain name is needed for security keys and certificates.

     
    Step 5 crypto key generate rsa usage-keys


    Example: 
    Device(config)# crypto key generate rsa usage-keys
     

    (Optional) Generates an RSA key pair.

    • The usage-keys keyword specifies that two RSA special-usage key pairs should be generated (that is, one encryption pair and one signature pair) instead of one general-purpose key pair.

    • RSA key pairs are used to sign and encrypt Internet key exchange (IKE) key management messages and are required before you can obtain a certificate for your Device.

    • RSA key pairs are generated automatically. This command can be used to regenerate the keys, if needed.

    Note   

    There are other keywords and arguments for this command, but they do not pertain to this feature.

     
    Step 6 crypto ca trustpoint name


    Example: 
    Device(config)# crypto ca trustpoint TP1
     

    Specifies a local configuration name for the CA trustpoint and enters CA trustpoint configuration mode.

    Note   

    The crypto ca identity command was replaced by the crypto ca trustpoint command.

     
    Step 7 enrollment url url


    Example: 
    Device(ca-trustpoint)# enrollment url http://example.com
     

    Specifies a URL of the CA where your Device should send certificate requests.

    • If you are using Simple Certificate Enrollment Protocol (SCEP) for enrollment, the URL argument must be in the form http://CA-name , where CA-name is the host Domain Name System (DNS) name or IP address of the CA trustpoint.

     
    Step 8 enrollment http-proxy host-name port-number


    Example: 
    Device(ca-trustpoint)# enrollment http-proxy example.com 8080
     

    (Optional) Configures the Device to obtain certificates from the CA through an HTTP proxy server.

     
    Step 9 crl {query url | optional | best-effort}


    Example: 
    Device(ca-trustpoint)# crl query ldap://example.com
     

    Configures the Device to request a certificate revocation list (CRL), make CRL checking optional, or perform CRL checking on a “best-effort” basis.

    • CRLs ensure that the certificate of the peer has not been revoked.

    • The crl optional command configures the Device to accept certificates even if the appropriate CRL cannot be downloaded.

    • Use the crl query url command to specify the Lightweight Directory Access Protocol (LDAP) URL of the CA server; for example, ldap://another-server.

     
    Step 10 primary


    Example: 
    Device(ca-trustpoint)# primary
     

    (Optional) Specifies that this trustpoint should be used as the primary (default) trustpoint for CA requests.

    • Use this command if more than one CA trustpoint will be configured on this Device.

     
    Step 11 exit


    Example: 
    Device(ca-trustpoint)# exit
     

    Exits CA trustpoint configuration mode and returns to global configuration mode.

     
    Step 12 crypto ca authenticate name


    Example: 
    Device(config)# crypto ca authenticate TP1
     

    Authenticates the CA by getting the public key of the CA.

    • Use the same name that you used when declaring the CA in the crypto ca trustpoint command.

     
    Step 13 crypto ca enrollment name


    Example: 
    Device(config)# crypto ca enrollment TP1
     

    Obtains the certificate from the specified CA trustpoint.

    • This command requests a signed certificate from the CA for each RSA key pair.

     
    Step 14Do one of the following:
    • copy running-config startup-config
    • copy system:running-config nvram:startup-config


    Example: 
    Device(config)# copy running-config startup-config
     

    Saves the configuration to NVRAM.

    • This command is required to save the certificates into NVRAM. If not used, the certificates would be lost at Device reload.

    Note   

    To execute EXEC mode commands in global configuration mode, you can add the do keyword before the command. For example, instead of copy running-config startup-config, you could enter do copy running-config startup-config.

     

    Configuring the HTTPS Server with SSL 3.0

    To disable the standard HTTP server and configure the HTTPS server with SSL 3.0, complete the procedure in this section.

    Before You Begin

    If a certificate authority is to be used for certification, you should declare the CA trustpoint on the routing device before enabling the secure HTTP server.

    SUMMARY STEPS

      1.    enable

      2.    Device# show ip http server status

      3.    configure terminal

      4.    no ip http server

      5.    ip http secure-server

      6.    ip http secure-port port-number

      7.    ip http secure-ciphersuite [3des-ede-cbc-sha] [rc4-128-sha] [rc4-128-md5] [des-cbc-sha]

      8.    ip http secure-client-auth

      9.    ip http secure-trustpoint name

      10.    end

      11.    show ip http server secure status


    DETAILED STEPS
       Command or ActionPurpose
      Step 1 enable


      Example: 
      Device> enable
       

      Enables privileged EXEC mode.

      • Enter your password if prompted.

       
      Step 2 Device# show ip http server status

      Example: 
      Device# show ip http server status


      Example: 
      
 
			 
      

		   
            		  
			 
       (Optional)
				Displays the status of the HTTP server. 
			 
      
 
			 
      • 
				  
         If you
					 are unsure whether the secure HTTP server is supported in the software image
					 you are running, enter this command and look for the line “HTTP secure server
					 capability: {Present | Not present}”.
				  
        

				
        • 

      • 
				  
         This
					 command displays the status of the standard HTTP server (enabled or disabled).
				  
        

				
        • 

      
 
		   
      
      

      Step 3 
			  
				configure 
			  
			  
				terminal 
			  
		  
       

      Example:
			 
       
				
      Device# configure terminal 
      
 
			 
      

		   
            		  
			 
       Enters global
				configuration mode.
			 
      
 
		   
      
      

      Step 4 
			  
				no 
				ip 
				http 
				server
				
			  
		  
       

      Example:
			 
       
				
      Device(config)# no ip http server
      
 
			 
      

		   
            		  
			 
       Disables the
				standard HTTP server.
			 
      
 
			 
      Note   
                
              
				
       When
				  enabling the HTTPS server you should always disable the standard HTTP server to
				  prevent insecure connections to the same services. This is a precautionary step
				  (typically, the HTTP server is disabled by default).
				
      

			 
      
 
		   
      
      

      Step 5 
			  
				ip 
				http 
				secure-server 
			  
		  
       

      Example:
			 
       
				
      Device(config)# ip http secure-server
      
 
			 
      

		   
            		  
			 
       Enables the
				HTTPS server.
			 
      
 
		   
      
      

      Step 6 
			  
				ip 
				http 
				secure-port 
			  
			  
				port-number 
			  
		  
       

      Example:
			 
       
				
      Device(config)# ip http secure-port 1025
      
 
			 
      

		   
            		  
			 
       (Optional)
				Specifies the port number that should be used for the HTTPS server. The default
				port number is 443. Valid options are 443 or any number in the range 1025 to
				65535.
			 
      
 
		   
      
      

      Step 7 
			  
				ip 
				http 
				secure-ciphersuite 
			  [3des-ede-cbc-sha] [rc4-128-sha] [rc4-128-md5] [des-cbc-sha] 
		  
       

      Example:
			 
       
				
      Device(config)# ip http secure-ciphersuite rc4-128-sha rc4-128-md5 
      
 
			 
      

		   
            		  
			 
       (Optional)
				Specifies the CipherSuites (encryption algorithms) that should be used for
				encryption over the HTTPS connection. 
			 
      
 
			 
      • 
				  
         This
					 command allows you to restrict the list of CipherSuites that the server offers
					 the connecting clients. For example, you may want to allow only the most secure
					 CipherSuite to be used. 
				  
        

				
        • 

      • 
				  
         Unless
					 you have a reason to specify the CipherSuites that should be used, or you are
					 unfamiliar with the details of these CipherSuites, you should leave this
					 command unconfigured and let the server and client negotiate the CipherSuite
					 that they both support (this is the default). 
				  
        

				
        • 

      
 
		   
      
      

      Step 8 
			  
				ip 
				http 
				secure-client-auth 
			  
		  
       

      Example:
			 
       
				
      Device(config)# ip http secure-client-auth
      
 
			 
      

		   
            		  
			 
       (Optional)
				Configures the HTTP server to request an X.509v3 certificate from the client in
				order to authenticate the client during the connection process.
			 
      
 
			 
      • 
				  
         In the
					 default connection and authentication process, the client requests a
					 certificate from the HTTP server, but the server does not attempt to
					 authenticate the client. Authenticating the client provides more security than
					 server authentication by itself, but not all clients may be configured for CA
					 authentication. 
				  
        

				
        • 

      
 
		   
      
      

      Step 9 
			  
				ip 
				http
				
				secure-trustpoint 
			  
			  
				name
				
			  
		  
       

      Example:
			 
       
				
      Device(config)# ip http secure-trustpoint trustpoint-01
      
 
			 
      

		   
            		  
			 
       Specifies the
				CA trustpoint that should be used to obtain an X.509v3 security certificate and
				to authenticate the connecting client’s certificate. 
			 
      
 
			 
      • 
				  
         Use of
					 this command assumes you have already declared a CA trustpoint using the 
					 crypto 
						ca 
						trustpoint command and associated submode
					 commands.
				  
        

				
        • 

      • 
				  
         Use the
					 same trustpoint name that you used in the associated 
					 crypto 
						ca 
						trustpoint command.
				  
        

				
        • 

      
 
		   
      
      

      Step 10 
			  
				end 
			  
		  
       

      Example:
			 
       
				
      Device(config)# end
      
 
			 
      

		   
            		  
			 
       Ends the
				current configuration session and returns you to privileged EXEC mode.
			 
      
 
		   
      
      

      Step 11 
			  
				show
				
				ip 
				http
				
				server 
				secure 
				status 
			  
		  
       

      Example:
			 
       
				
      Device# show ip http server secure status
      
 
			 
      

		   
            		  
			 
       Displays the
				status of the HTTP secure server configuration.
			 
      
 
		   
      
      

      

      

      Verifying the Configuration of the HTTPS Server
      

      
To verify the configuration of the HTTPS server, connect to the router running the HTTPS server with a web browser by entering https://url
, where url
 is the IP address or hostname of the router. Successful connection using the https prefix (instead of the standard http) indicates that the HTTPS server is configured properly. If a port other than the default port is configured (using the ip http secure-port command), you must also specify the port number after the URL. For example: 
      

      https://209.165.202.129:1026 
      

      
or
      

      https://host.domain.com:1026 

      

      
Generally, you can verify that the HTTPS server is configured and that you have a secure connection by locating an image of a padlock at the bottom of your browser window. Also note that secure HTTP connections have a URL that starts with “https:” instead of “http:”.
      

      

      

      

      Providing Additional Security
	 and Efficiency
      

       
		
       The configuration
		  of the standard HTTP server applies to the secure HTTP server as well. To
		  provide additional security and efficiency to both the standard HTTP server and
		  the HTTPS server, complete the procedure in this section. 
		
      
 
	 
      
SUMMARY STEPS
        1.   
       
			  
				enable
				
			  
		  
        

        2.   
       
			  
				configure 
			  
			  
				terminal 
			  
		  
        

        3.   
       
			  
				ip 
				http 
				path 
			  
			  
				path-name 
			  
		  
        

        4.   
       
			  
				ip 
				http 
				access-class 
			  
			  
				access-list-number 
			  
		  
        

        5.   
       
			  
				ip 
				http 
				max-connections 
			  
			  
				value 
			  
		  
        

        6.   
       
			  
				ip 
				http 
				timeout-policy 
				idle 
			  
			  
				seconds 
			  
			  
				life 
			  
			  
				seconds 
			  
			  
				requests 
			  
			  
				value 
			  
		  
        


      DETAILED STEPS
         Command or ActionPurpose
        Step 1 
			  
				enable
				
			  
		  
         

        Example:
			 
         
				
        Device> enable
        
 
			 
        

		   
              		  
			 
         Enables
				privileged EXEC mode. 
			 
        
 
			 
        • 
				  
           Enter your
					 password if prompted.
				  
          

				
          • 

        
 
		   
      
        

        Step 2 
			  
				configure 
			  
			  
				terminal 
			  
		  
         

        Example:
			 
         
				
        Device# configure terminal 
        
 
			 
        

		   
              		  
			 
         Enters global
				configuration mode.
			 
        
 
		   
      
        

        Step 3 
			  
				ip 
				http 
				path 
			  
			  
				path-name 
			  
		  
         

        Example:
			 
         
				
        Device(config)# ip http path slot1:
        
 
			 
        

		   
              		  
			 
         (Optional) Sets
				the base HTTP path for HTML files. 
			 
        
 
			 
        • 
				  
           The base
					 path is used to specify the location of the HTTP server files (HTML files) on
					 the local system. Generally, the HTML files are located in system flash memory.
				  
          

				
          • 

        
 
		   
      
        

        Step 4 
			  
				ip 
				http 
				access-class 
			  
			  
				access-list-number 
			  
		  
         

        Example:
			 
         
				
        Device(config)# ip http access-class 20
        
 
			 
        

		   
              		  
			 
         (Optional)
				Specifies the access list that should be used to allow access to the HTTP
				server.
			 
        
 
		   
      
        

        Step 5 
			  
				ip 
				http 
				max-connections 
			  
			  
				value 
			  
		  
         

        Example:
			 
         
				
        Device(config)# ip http max-connections 10
        
 
			 
        

		   
              		  
			 
         (Optional) Sets
				the maximum number of concurrent connections to the HTTP server that will be
				allowed. The default value is 5. 
			 
        
 
		   
      
        

        Step 6 
			  
				ip 
				http 
				timeout-policy 
				idle 
			  
			  
				seconds 
			  
			  
				life 
			  
			  
				seconds 
			  
			  
				requests 
			  
			  
				value 
			  
		  
         

        Example:
			 
         
				
        Device(config)# ip http timeout-policy idle 30 life 120 requests 100 
        
 
			 
        

		   
              		  
			 
         (Optional) Sets
				the characteristics that determine how long a connection to the HTTP server
				should remain open. The characteristics are:
			 
        
 
			 
        • 
				  
           
					  
						idle 
					 --The maximum number of seconds the connection will be
					 kept open if no data is received or response data cannot be sent out on the
					 connection. Note that a new value may not take effect on any already existing
					 connections. If the server is too busy or the limit on the 
					 life time or
					 the number of 
					 requests is
					 reached, the connection may be closed sooner. The default value is 180 seconds
					 (3 minutes).
				  
          

				
          • 

        • 
				  
           
					  
						life 
					 --The maximum number of seconds the connection will be
					 kept open, from the time the connection is established. Note that the new value
					 may not take effect on any already existing connections. If the server is too
					 busy or the limit on the idle time or the number of requests is reached, it may
					 close the connection sooner. Also, because the server will not close the
					 connection while actively processing a request, the connection may remain open
					 longer than the specified 
					 life time if
					 processing is occurring when the life maximum is reached. In this case, the
					 connection will be closed when processing finishes. The default value is 180
					 seconds (3 minutes). The maximum value is 86,400 seconds (24 hours).
				  
          

				
          • 

        • 
				  
           
					  
						requests 
					 --The maximum limit on the number of requests processed
					 on a persistent connection before it is closed. Note that the new value may not
					 take effect on any already existing connections. If the server is too busy or
					 the limit on the idle time or the life time is reached, the connection may be
					 closed before the maximum number of requests are processed. The default value
					 is 1. The maximum value is 86,400. 
				  
          

				
          • 

        
 
		   
      
        

        

        

        

        Configuring the HTTPS Client
	 with SSL 3.0
        

         
		
         To configure the
		  HTTPS client with SSL 3.0, complete the procedure in this section.
		
        
 
	 
        

        Before You Begin 
		
         The standard HTTP
		  client and the secure HTTP client are always enabled.
		
        
 
		
         A certificate
		  authority is required for secure HTTP client certification; the following steps
		  assume that you have previously declared a CA trustpoint on the routing device.
		  If a CA trustpoint is not configured, and the remote HTTPS server requires
		  client authentication, connections to the secure HTTP client will fail.
		
        
 
	 
        
SUMMARY STEPS
          1.   
       
			  
				enable
				
			  
		  
          

          2.   
       
			  
				configure 
			  
			  
				terminal 
			  
		  
          

          3.   
       
			  
				ip 
				http 
				client
				
				secure-trustpoint 
			  
			  
				trustpoint-name 
			  
		  
          

          4.   
       
			  
				ip 
				http 
				client
				
				secure-ciphersuite 
			  [3des-ede-cbc-sha] [rc4-128-sha] [rc4-128-md5] [des-cbc-sha]
		  
          

          5.   
       
			  
				end 
			  
		  
          

          6.   
       
			  
				show 
				ip 
				http 
				client
				
				secure
				
				status
				
			  
		  
          


        DETAILED STEPS
           Command or ActionPurpose
          Step 1 
			  
				enable
				
			  
		  
           

          Example:
			 
           
				
          Device> enable
          
 
			 
          

		   
                		  
			 
           Enables
				privileged EXEC mode. 
			 
          
 
			 
          • 
				  
             Enter your
					 password if prompted.
				  
            

				
            • 

          
 
		   
      
          

          Step 2 
			  
				configure 
			  
			  
				terminal 
			  
		  
           

          Example:
			 
           
				
          Device# configure terminal 
          
 
			 
          

		   
                		  
			 
           Enters global
				configuration mode.
			 
          
 
		   
      
          

          Step 3 
			  
				ip 
				http 
				client
				
				secure-trustpoint 
			  
			  
				trustpoint-name 
			  
		  
           

          Example:
			 
           
				
          Device(config)# ip http client secure-trustpoint trustpoint01
          
 
			 
          

		   
                		  
			 
           (Optional)
				Specifies the CA trustpoint that should be used if the remote HTTP server
				requests client authentication. 
			 
          
 
			 
          • 
				  
             Use of
					 this command assumes you have already declared a CA trustpoint using the 
					 crypto 
						ca 
						trustpoint command and associated submode
					 commands.
				  
            

				
            • 

          • 
				  
             Use the
					 same trustpoint name that you used in the associated 
					 crypto 
						ca 
						trustpoint command.
				  
            

				
            • 

          • 
				  
             This
					 command is optional if client authentication is not needed, or if a primary
					 trustpoint has been configured. If the 
					 ip 
						http 
						client 
						secure-trustpoint command is not used, the Device
					 will use the primary trustpoint, as specified by the 
					 primaryCA
					 trustpoint configuration mode command. 
				  
            

				
            • 

          
 
		   
      
          

          Step 4 
			  
				ip 
				http 
				client
				
				secure-ciphersuite 
			  [3des-ede-cbc-sha] [rc4-128-sha] [rc4-128-md5] [des-cbc-sha]
		  
           

          Example:
			 
           
				
          Device(config)# ip http client secure-ciphersuite rc4-128-sha rc4-128-md5 
          
 
			 
          

		   
                		  
			 
           (Optional)
				Specifies the CipherSuites (encryption algorithms) that should be used for
				encryption over the HTTPS connection. 
			 
          
 
			 
          • 
				  
             This
					 command allows you to restrict the list of CipherSuites that the client offers
					 when connecting to a secure HTTP server. For example, you may want to allow
					 only the most secure CipherSuites to be used. 
				  
            

				
            • 

          • 
				  
             Unless
					 you have a reason to specify the CipherSuites that should be used, or you are
					 unfamiliar with the details of these CipherSuites, you should leave this
					 command unconfigured and let the server and client negotiate the CipherSuite
					 that they both support (this is the default).
				  
            

				
            • 

          
 
		   
      
          

          Step 5 
			  
				end 
			  
		  
           

          Example:
			 
           
				
          Device(config)# end
          
 
			 
          

		   
                		  
			 
           Ends the
				current configuration session and returns to privileged EXEC mode.
			 
          
 
		   
      
          

          Step 6 
			  
				show 
				ip 
				http 
				client
				
				secure
				
				status
				
			  
		  
           

          Example:
			 
           
				
          Device# show ip http client secure status
          
 
			 
          

		   
                		  
			 
           Displays the
				status of the HTTP secure server configuration.
			 
          
 
		   
      
          

          

          

          

          

          Configuration Examples for
	 the HTTPS--HTTP Server and Client with SSL 3.0 feature
          

           
		
           The following
		  example shows a configuration session in which the secure HTTP server is
		  enabled, the port for the secure HTTP server is configured as 1025, and the
		  remote CA trustpoint server “CA-trust-local” is used for certification.
		
          
 
		
           
		
          
 
		
          Device# show ip http server status
 
HTTP server status: Disabled
HTTP server port: 80
HTTP server authentication method: enable
HTTP server access class: 0
HTTP server base path: 
Maximum number of concurrent server connections allowed: 5
Server idle time-out: 600 seconds
Server life time-out: 600 seconds
Maximum number of requests allowed on a connection: 1
HTTP secure server capability: Present
HTTP secure server status: Disabled
HTTP secure server port: 443
HTTP secure server ciphersuite: 3des-ede-cbc-sha des-cbc-sha rc4-128-md5 rc4-12a
HTTP secure server client authentication: Disabled
HTTP secure server trustpoint: 
Device# configure terminal
 
Enter configuration commands, one per line.  End with CNTL/Z.
Device(config)# ip http secure-server
 
Device(config)# ip http client secure-trustpoint CA-trust-local
 
Device(config)# ip http secure-port 1024
 
Invalid secure port value.
Device(config)# ip http secure-port 1025
 
Device(config)# ip http secure-ciphersuite rc4-128-sha rc4-128-md5 
Device(config)# end

          
 
		
          Device# show ip http server secure status
          
 
		
          HTTP secure server status: Enabled
          
 
		
          HTTP secure server port: 1025
          
 
		
          HTTP secure server ciphersuite: rc4-128-md5 rc4-128-sha
          
 
		
          HTTP secure server client authentication: Disabled
          
 
		
          HTTP secure server trustpoint: CA-trust-local

          
 
		
           In the following
		  example, the CA trustpoint CA-trust-local is specified, and the HTTPS client is
		  configured to use this trustpoint for client authentication requests:
		
          
 
		
          Device# config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Device(config)# crypto ca trustpoint CA-trust-local
 
Device(ca-trustpoint)# enrollment url http://example.com
 
Device(ca-trustpoint)# crl query ldap://example.com
 
Device(ca-trustpoint)# primary
 
Device(ca-trustpoint)# exit
 
Device(config)# ip http client secure-trustpoint CA-trust-local
 
Device(config)# end
 
Device# copy running-config startup-config
 
          
 
	 
          

          

          

          Additional References
          

          
      
          
The following sections provide references related to the HTTPS--HTTP Server and Client with SSL 3.0 feature.
          

    
          

          Related Documents
          
      
      

          
                
          
Related Topic
          

                        		

                
          
Document Title
          

                        		

          
          

          
                
          
SSL 3.0
          

                        		

                
          
The SSL Protocol Version 3.0

          

                
          
                  
                    This
                    document
                    is
                    available
                    from
                    various
                    sources
                    online.
                  
                
          

                        		

          

          
                
          
Standard Cisco Web Client
          

                        		

                
          
HTTP 1.1 Web Client

          

                        		

          

          
                
          
Standard Cisco Web Server
          

                        		

                
          
HTTP 1.1 Web Server

          

                        		

          

          
                
          
Certification Authority Interoperability
          

                        		

          
                
          • 
Configuring Certification Authority Interoperability

            

            • 

          • 
Certificate Autoenrollment

            

            • 

          • 
Certificate Enrollment Enhancements

            

            • 

          • 
Trustpoint CLI

            

            • 

          • 
Source Interface Selection for Outgoing Traffic with Certificate Authority

            

            • 

          

              
          
          		

          
          

          

          

    
          

          Standards
          
      
      

          
                
          
Standard
          

                        		

                
          
Title
          

                        		

          
          

          
                
          
No new or modified standards are supported by this feature.
          

                        		

                
          
--
          

                        		

          
          

          

          

    
          

          Related MIBs
          
      
      

          
                
          
MIBs
          

                        		

                
          
MIBs Link
          

                        		

          
          

          
                
          • 
No new or modified MIBs are supported by this feature and support for existing MIBs has not been modified by this feature.
            

            • 

          

              
          
          		

                
          
To locate and download MIBs for selected platforms, Cisco IOS XE releases, and feature sets, use Cisco MIB Locator found at the following URL:
          

                
          
                  http:/​/​www.cisco.com/​go/​mibs
                
          

                        		

          
          

          

          

    
          

          Related RFCs
          
      
      

          
                
          
RFCs
          

                        		

                
          
Description
          

                        		

          
          

          
                
          
RFC 2616
          

                        		

                
          
Cisco’s implementation of HTTP is based on 
RFC 2616: Hypertext Transfer Protocol -- HTTP/1.1
. 
          

                        		

          
          

          

          

    
          

          Technical Assistance
          
      
      

          
                
          
Description
          

                        		

                
          
Link
          

                        		

          
          

          
                
          
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.
          

                
          
To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.
          

                
          
Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.
          

                        		

                
          
                  http:/​/​www.cisco.com/​techsupport 
                
          

                        		

          
          

          

          

    
          

          

          

          Feature Information for
	 HTTPS--HTTP Server and Client with SSL 3.0
          

           
		
          The following table
		  provides release information about the feature or features described in this
		  module. This table lists only the software release that introduced support for
		  a given feature in a given software release train. Unless noted otherwise,
		  subsequent releases of that software release train also support that feature. 
		
          
 Use Cisco Feature Navigator to find information about platform
		support and Cisco software image support. To access Cisco Feature Navigator, go
		to 
		.
		An account on Cisco.com is not required. 
	 
          

           
		

          Table 1 Feature Information for
		  HTTPS--HTTP Server and Client with SSL 3.0 
           
				  
           Feature
					 Name 
				  
          
 
				          		
 
				  
           Releases 
				  
          
 
				          		
 
				  
           Feature
					 Information 
				  
          
 
				          		

          
          

           
				  
           HTTPS--HTTP
					 Server and Client with SSL 3.0 
				  
          
 
				          		
 
				  
           Cisco IOS
					 XE Release 2.1 
				  
          
 
				   
				  
          Cisco IOS XE Release 3.3SE 
				  
          
 
				          		
 
				  
           This
					 feature provides Secure Socket Layer (SSL) version 3.0 support for the HTTP 1.1
					 server and HTTP 1.1 client within Cisco IOS XE software. SSL provides server
					 authentication, encryption, and message integrity to allow secure HTTP
					 communications. SSL also provides HTTP client authentication. 
				  
          
 
				  
           This
					 feature is supported only in Cisco software images that support SSL.
					 Specifically, SSL is supported in “IPSec 56” and “IPSec 3DES” images (contains
					 “k8” or “k9” in the image name). 
				  
          
 
				  
           The
					 following commands are introduced or modified in the feature or features
					 documented in this module. 
				  
          
 
				   
				  
          In Cisco IOS XE Release 3.3SE, this feature is supported on
					 Cisco Catalyst 3850 Series Switches. 
				  
          

				   
				  
          •  
						
             
						   
							 debug 
							 ip 
							 http 
							 ssl 
							 error 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 client 
							 secure-ciphersuite 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 client 
							 secure-trustpoint 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 secure-ciphersuite 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 secure-client-auth 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 secure-port 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 secure-server 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 ip 
							 http 
							 secure-trustpoint 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 show 
							 ip 
							 http 
							 client 
							 secure 
							 status 
						   
						
            
 
					 
            • 

          •  
						
             
						   
							 show 
							 ip 
							 http 
							 server 
							 secure 
							 status 
						   
						
            
 
					 
            • 

          
 
				  
           
				  
          
 
				          		

          
          

          

          
 
	 
          

          

          

          Glossary
          

          
RSA--RSA is a widely used Internet encryption and authentication system that uses public and private keys for encryption and decryption. The RSA algorithm was invented in 1978 by Ron Rivest, Adi Shamir, and Leonard Adleman. The abbreviation RSA comes from the first letter of the last names of the three original developers. The RSA algorithm is included in many applications, such as the web browsers from Microsoft and Netscape. The RSA encryption system is owned by RSA Security.
          

          
      
        SHA
      --The Secure Hash Algorithm. SHA was developed by NIST and is specified in the Secure Hash Standard (SHS, FIPS 180). Often used as an alternative to Digest 5 algorithm.
          

          
signatures, digital--In the context of SSL, “signing” means to encrypt with a private key. In digital signing, one-way hash functions are used as input for a signing algorithm. In RSA signing, a 36-byte structure of two hashes (one SHA and one MD5) is signed (encrypted with the private key).
          

          
SSL 3.0--Secure Socket Layer version 3.0. SSL is a security protocol that provides communications privacy over the Internet. The protocol allows client and server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery. SSL uses a program layer located between the Internet’s HTTP and TCP layers. SSL is included as part of most web server products and as part of most Internet browsers.