IP Addressing: DHCP Configuration Guide, Cisco IOS XE Fuji 16.8.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configuring the DHCP Server On-Demand Address Pool Manager
The Cisco IOS XE DHCP server on-demand address pool (ODAP) manager is used to centralize the management of large pools of
addresses and simplify the configuration of large networks. ODAP provides a central management point for the allocation and
assignment of IP addresses. When a Cisco IOS XE router is configured as an ODAP manager, pools of IP addresses are dynamically
increased or reduced in size depending on the address utilization level. A DHCP pool configured in the router can also be
used as an IP address pooling mechanism. The IP address pooling mechanism is configured in the router to specify the source
of IP addresses for PPP peers.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information,
see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module,
and to see a list of the releases in which each feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature
Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Configuring the DHCP Server On-Demand Address Pool Manager
Before you configure the ODAP manager, you should understand the concepts documented in the “DHCP Overview” module.
You must configure standard Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs) unless you intend to use
non-MPLS VPNs.
In order for the IP address pooling mechanism to work correctly, the VPN routing and forwarding instance (VRF) of the PPP
session must match that configured on the pool. Typically this matching is done either by configuring the
ip vrf forwarding vrf-name command on the virtual template interface, or if AAA is used to authorize the PPP user, it can be part of the user’s profile
configuration.
Note
For a default session, you can apply access interface VRF and VRF service simultaneously.
Restrictions for Configuring the DHCP Server On-Demand Address Pool Manager
The ip dhcp excluded-address global configuration command cannot be used to exclude addresses from VRF associated pools.
The vrf DHCP pool configuration command is currently not supported for host pools.
Attribute inheritance is not supported on VRF pools.
A router can be configured as a subnet allocation server and a DHCP server at the same time with one restriction: separate
pools must be created for subnet allocation and IP address assignment. An address pool cannot be used by DHCP for both subnet
allocation and IP address assignment.
Information About the DHCP Server On-Demand Address Pool Manager
ODAP Manager Operation
ODAPs enable pools of IP addresses to be dynamically increased or reduced in size depending on the address utilization level.
Once configured, the ODAP is populated with one or more subnets leased from a source server and is ready to serve address
requests from DHCP clients or from PPP sessions. The source server can be a remote DHCP server or a RADIUS server (via AAA).
Currently, only the Cisco Access Registrar RADIUS server supports ODAPs. Subnets can be added to the pool when a certain utilization
level (high utilization mark) is achieved. When the utilization level falls below a certain level (low utilization mark),
a subnet can be returned to the server from which it was originally leased. Summarized routes for each leased subnet must
be inserted or removed from the related VRF with each addition or removal of subnets into the ODAP.
ODAPs support address assignment using DHCP for customers using private addresses such as in MPLS VPNs. VPNs allow the possibility
that two pools in separate networks can have the same address space, with private network addresses, served by the same DHCP
server. These IP addresses can be distinguished by a VPN identifier to help select the VPN to which the client belongs.
Each ODAP is configured and associated with a particular MPLS VPN. Cisco IOS XE software also supports non-MPLS VPN address
pools by adding pool name support to the
peer default ip address dhcp-pool pool-namecommand.
For MPLS VPNs, each VPN is associated with one or more VRFs. The VRF is a key element in the VPN technology because it maintains
the routing information that defines a customer VPN site. This customer site is attached to a provider edge (PE) router. A
VRF consists of an IP routing table, a derived Cisco Express Forwarding (CEF) table, a set of interfaces that use the forwarding
table, and a set of rules and routing protocol parameters that control the information that is included in the routing table.
A PPP session belonging to a specific VPN is only allocated an address from the ODAP associated with that VPN. These PPP
sessions are terminated on a Virtual Home Gateway (VHG)/PE router where the ODAP is configured. The VHG/PE router maps the
remote user to the corresponding MPLS VPNs.
For PPP sessions, individual address allocation from an ODAP follows a First Leased subnet First (FLF) policy. FLF searches
for a free address beginning on the first leased subnet, followed by a search on the second leased subnet if no free address
is available in the first subnet, and so on. This policy provides the benefit of grouping the leased addresses over time to
a set of subnets, which allows an efficient subnet release and route summarization.
However, the FLF policy differs from the normal DHCP address selection policy. Normal DHCP address selection takes into account
the IP address of the receiving interface or the gateway address if it is nonzero. To support both policies, the DHCP server
needs to be able to distinguish between a normal DHCP address request and an address request for a PPP client. The ODAP manager
uses an IP address pooling mechanism for PPP that allows the DHCP server to distinguish between a normal DHCP address request
and a request from a PPP client.
Subnet release from an ODAP follows a Last Leased subnet First (LLF) policy, which prefers the last leased subnet to be released
first. This LLF policy searches for a releasable subnet (a subnet with no addresses currently being leased) starting with
the last leased subnet. If a releasable subnet is found (candidate subnet), it is released, and the summarized route for that
subnet is removed. If more than one releasable subnet exists at that time, only the most recently allocated is released. If
there are no releasable subnets, no action is taken. If by releasing the candidate subnet, the high utilization mark is reached,
the subnet is not released. The first leased subnet is never released (regardless of the instantaneous utilization level)
until the ODAP is disabled.
When a DHCP pool receives multiple subnets from an upstream DHCP server, an address from each subnet is automatically configured
on the client connected interface so that the addresses within the subnets can be requested by DHCP clients.
The first address in the first subnet is automatically assigned to the primary address on the interface. The first address
of each subsequent subnet is assigned to secondary addresses on the interface. In addition, as client addresses are reclaimed,
the count of lease addresses for that subnet is decremented. Once a lease counter for a subnet reaches zero (that is, lease
expiry), the subnet is returned to the pool. The previous address on the interface is removed and the first secondary address
on the interface is promoted as the primary address of the interface.
The figure below shows an ODAP manager configured on the Cisco IOS XE DHCP server. The ODAP requests an initial pool from
the AAA server. Clients make DHCP requests and the DHCP server fulfills requests from the pool. When the utilization rate
meets 90 percent, the ODAP manager requests an expansion and the AAA server allocates another subnet from which the ODAP manager
can allocate addresses.
Figure 1. ODAP Address Pool Management for MPLS VPNs
Subnet Allocation Server Operation
You can also configure the ODAP manager to allocate subnets instead of individual IP addresses.
This capability allows the network operator to configure a Cisco IOS XE router as a subnet allocation server. The operation
of a subnet allocation server is similar to the operation of a DHCP server, except that pools of subnets are created and assigned
instead of pools of IP addresses. Subnet allocation pools are created and configured by using the
subnet prefix-length command in DHCP pool configuration mode. The size of each assigned or allocated subnet is set by the
prefix-length argument, using standard Common InterDomain Routing (CIDR) bit count notation to determine the number of addresses that are
configured in each subnet lease.
When a DHCP server is configured as a subnet allocation server, it provides subnet allocation pools for ODAP manager allocation.
In the figure below, Router B is the subnet allocation server and allocates subnets to the ODAP manager based on the demand
for IP addresses and subnet availability. Router B is configured to allocate an initial amount of address space in the form
of subnets to the ODAP manager. The size of the subnet allocated by the ODAP manager is determined by the subnet size that
is configured on the subnet allocation server. The ODAP manager will then assign addresses to clients from these subnets and
allocate more subnets as the need for address space increases.
Figure 2. Subnet Allocation Server Topology
When the ODAP manager allocates a subnet, the subnet allocation server creates a subnet binding. This binding is stored in
the DHCP database for as long as the ODAP manager requires the address space. The binding is removed and the subnet is returned
to the subnet pool only when the ODAP manager releases the subnet as address space utilization decreases.
The subnet allocation server can also be associated with a VRF. A VRF consists of an IP routing table, a derived CEF table,
a set of interfaces that use the forwarding table, and a set of rules and routing protocol parameters that control the information
that is included in the routing table.
Benefits of Using ODAPs
Efficient Address Management
The ODAP manager allows customers to optimize their use of IP addresses, thus conserving address space.
Efficient Route Summarization and Update
The ODAP manager inserts a summarized route when a subnet is added to the ODAP.
Multiple VRF and Independent Private Addressing Support
The ODAP manager automatically injects subnet routing information into the appropriate VRF.
How to Configure the DHCP Server On-Demand Address Pool Manager
Defining DHCP ODAPs as the Global Default Mechanism
Perform this task to specify that the global default mechanism to use
is on-demand address pooling.
IP addressing allows configuration of a global default address
pooling mechanism. The DHCP server needs to be able to distinguish between a
normal DHCP address request and an address request for a PPP client.
SUMMARY STEPS
enable
configure terminal
ip address-pool dhcp-pool
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip address-pool dhcp-pool
Example:
Router(config)# ip address-pool dhcp-pool
Enables on-demand address pooling as the global default IP
address mechanism.
For remote access (PPP) sessions into MPLS VPNs, IP addresses
are obtained from locally configured VRF-associated DHCP pools.
Defining DHCP ODAPs on an Interface
Perform this task to configure on-demand address pools on an interface.
The interface on-demand address pooling configuration overrides the global default mechanism on that interface.
SUMMARY STEPS
enable
configure terminal
interface typenumber
peer default ip address dhcp-pool [pool-name]
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface typenumber
Example:
Router(config)# interface Virtual-Template1
Specifies the interface and enters interface configuration mode.
Step 4
peer default ip address dhcp-pool [pool-name]
Example:
Router(config-if)# peer default ip address dhcp-pool mypool
Specifies an IP address from an on-demand address pool to be returned to a remote peer connecting to this interface.
The pool-name argument supports non-MPLS VPNs and is mandatory if the session is not associated with any VRF. Multiple pool names can be
accepted but must be separated by white space.
Configuring the DHCP Pool as an ODAP
Perform this task to configure a DHCP address pool as an ODAP pool.
Configures an address pool as an on-demand address pool.
If you do not configure the pool as an autogrow pool, the pool will not request additional subnets if one subnet is already
in the pool.
You can enter size as either the subnet mask (nnnn.nnnn.nnnn.nnnn) or prefix size (/nn). The valid values are /0 and /4 to
/30.
When a DHCP pool receives multiple subnets from an upstream DHCP server, an address from each subnet is automatically configured
on the client connected interface so that the addresses within the subnets can be requested by DHCP clients. The first address
in the first subnet is automatically assigned to the primary address on the interface. The first address of each subsequent
subnet is assigned to secondary addresses on the interface. In addition, as client addresses are reclaimed, the count of lease
addresses for that subnet is decremented. Once a lease counter for a subnet reaches zero (that is, lease expiry), the subnet
is returned to the pool. The previous address on the interface is removed and the first secondary address on the interface
is promoted as the primary address of the interface.
If the origin aaa option is configured, AAA must be configured.
Step 6
utilization mark low percentage-number
Example:
Router(dhcp-config)# utilization mark low 40
Sets the low utilization mark of the pool size.
This command cannot be used unless the autogrow size option of the origin command is configured.
The default value is 0 percent.
Step 7
utilization mark high percentage-number
Example:
Router(dhcp-config)# utilization mark high 60
Sets the high utilization mark of the pool size.
This command cannot be used unless the autogrow size option of the origin command is configured.
The default value is 100 percent.
Step 8
end
Example:
Router(dhcp-config)# end
Returns to global configuration mode.
Step 9
show ip dhcp pool [pool-name]
Example:
Router# show ip dhcp pool
(Optional) Displays information about DHCP address pools.
Information about the primary and secondary interface address assignment is also displayed.
Configuring ODAPs to Obtain Subnets Through IPCP Negotiation
Perform this task to configure your router to use subnets obtained through IP Control Protocol (IPCP) negotiation.
You can assign IP address pools to customer premises equipment (CPE) devices, which, in turn, assign IP addresses to the CPE
and to a DHCP pool. This functionality has three requirements:
The Cisco IOS XE CPE device must be able to request and use the subnet.
The RADIUS server (via AAA) must be able to provide that subnet and insert the framed route into the proper VRF table.
The PE router must be able to facilitate providing the subnet through (IPCP) negotiation.
SUMMARY STEPS
enable
configure terminal
ip dhcp pool pool-name
import {all | interface interface_name
origin ipcp
exit
interface typenumber
ip address pool pool-name
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip dhcp pool pool-name
Example:
Router(config)# ip dhcp pool red-pool
Configures a DHCP address pool on a Cisco IOS XE DHCP server and enters DHCP pool configuration mode.
Imports DHCP option parameters into the DHCP server database.
Step 5
origin ipcp
Example:
Router(dhcp-config)# origin ipcp
Configures an address pool as an on-demand address pool using IPCP as the subnet allocation protocol.
Step 6
exit
Example:
Router(dhcp-config)# exit
Exits DHCP pool configuration mode.
Step 7
interface typenumber
Example:
Router(config)# interface GigabitEthernet 0/0/0
Specifies the interface and enters interface configuration mode.
Step 8
ip address pool pool-name
Example:
Router(config-if)# ip address pool red-pool
Specifies that the interface IP address will be automatically configured from the named pool, when the pool is populated with
a subnet from IPCP.
Configuring AAA
Perform this task to configure AAA.
To allow ODAP to obtain subnets from the AAA server, the AAA client must be configured on the VHG/PE router.
SUMMARY STEPS
enable
configure terminal
aaa new-model
aaa authorization configuration default group radius
Do one of the following:
aaa accounting network default start-stop group radius
or
aaa accounting network default stop-only group radius
aaa session-id common
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
aaa new-model
Example:
Router(config)# aaa new-model
Enables AAA access control.
Step 4
aaa authorization configuration default group radius
Example:
Router(config)# aaa authorization configuration default group radius
Downloads static route configuration information from the AAA server using RADIUS.
Step 5
Do one of the following:
aaa accounting network default start-stop group radius
or
aaa accounting network default stop-only group radius
Example:
Router(config)# aaa accounting network default start-stop group radius
Example:
Example:
Router(config)# aaa accounting network default stop-only group radius
Enables AAA accounting of requested services for billing or security purposes when you use RADIUS. Sends a “start” accounting
notice at the beginning of a process.
or
Enables AAA accounting of requested services for billing or security purposes when you use RADIUS. Sends a “stop” accounting
notice at the end of the requested user process.
Step 6
aaa session-id common
Example:
Router(config)# aaa session-id common
Ensures that the same session ID will be used for each AAA accounting service type within a call.
Configuring RADIUS
ODAP AAA Profile
The AAA server sends the RADIUS Cisco AV pair attributes “pool-addr” and “pool-mask” to the Cisco IOS XE DHCP server in the
access request and access accept. The pool-addr attribute is the IP address and the pool-mask attribute is the network mask
(for example, pool-addr=192.168.1.0 and pool-mask=255.255.0.0). Together, these attributes make up a network address (address/mask)
that is allocated by the AAA server to the Cisco IOS XE DHCP server.
The ip-address argument specifies the IP address of the RADIUS server host.
Step 5
radius server attribute 32 include-in-access-req
Example:
Router(config)#
radius server attribute 32 include-in-access-req
Sends RADIUS attribute 32 (NAS-Identifier) in an access request or accounting request.
Step 6
radius server attribute 44 include-in-access-req
Example:
Router(config)#
radius server attribute 44 include-in-access-req
Sends RADIUS attribute 44 (Accounting Session ID) in an access request or accounting request.
Step 7
radius-server vsa send accounting
Example:
Router(config)#
radius-server vsa send accounting
Configures the network access server (NAS) to recognize and use vendor-specific accounting attributes.
Step 8
radius-server vsa send authentication
Example:
Router(config)#
radius-server vsa send authentication
Configures the NAS to recognize and use vendor-specific authentication attributes.
What to do next
Disabling ODAPs
This task shows how to disable an ODAP from a DHCP pool.
When an ODAP is disabled, all leased subnets are released. If active PPP sessions are using addresses from the released subnets,
those sessions will be reset. DHCP clients leasing addresses from the released subnets will not be able to renew their leases.
SUMMARY STEPS
enable
configure terminal
ip dhcp pool pool-name
no origin {dhcp |aaa |ipcp }
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip dhcp pool pool-name
Example:
Router(config)# ip dhcp pool red-pool
Configures a DHCP address pool on a Cisco IOS XE DHCP server and enters DHCP pool configuration mode.
Step 4
no origin {dhcp |aaa |ipcp }
Example:
Router(dhcp-config)# no origin dhcp
Disables the ODAP.
Verifying ODAP Operation
Perform this task to verify ODAP operation.
SUMMARY STEPS
enable
show ip dhcp pool [pool-name]
The following output is for two DHCP pools: Green and Global. Pool Green is configured with a high utilization mark of 50
and a low utilization mark of 30. The pool is also configured to obtain more subnets when the high utilization mark is reached
(autogrow). The Subnet size field indicates the values configured in the origin command as the initial and incremental subnet sizes that would be requested by the pool named Green. The Total addresses
field is a count of all the usable addresses in the pool. The Leased addresses field is a total count of how many bindings
were created from the pool. The Pending event field shows subnet request, which means that a subnet request is pending for
the pool. The subnet request was scheduled because the Leased addresses count has exceeded the high utilization level of the
pool. Subnets currently added to pool Green are shown in sequence. The Current index column shows the address that would be
allocated next from this subnet. The IP address range column shows the range of usable addresses from the subnet. The Leased
addresses column shows individual count of bindings created from each subnet. Three subnets are currently added to pool Green.
The first two subnets have used all their addresses and thus the Current index is showing 0.0.0.0.
Notice that pool Green and pool Global can have the same subnet (172.16.0.1-172.16.0.6) because pool Green is configured to
be in VRF Green, while pool Global is configured to be in the global address space.
show ip dhcp binding
The following output shows the bindings from pool Green. The Type field shows On-demand, which indicates that the address
binding was created for a PPP session. The Lease expiration field shows Infinite, which means that the binding is valid as
long as the session is up. If a subnet must be released back to the leasing server while the session is still up, the session
is reset so that it will be forced to obtain a new IP address. The Hardware address column for an On-demand entry shows the
identifier for the session as detected by PPP. There are no bindings shown under the Bindings from all pools not associated
with VRF field because the Global pool has not allocated any addresses.
DETAILED STEPS
Step 1
enable
Enables privileged EXEC mode. Enter your password if prompted.
Example:
Router> enable
Step 2
show ip dhcp pool [pool-name]
The following output is for two DHCP pools: Green and Global. Pool Green is configured with a high utilization mark of 50
and a low utilization mark of 30. The pool is also configured to obtain more subnets when the high utilization mark is reached
(autogrow). The Subnet size field indicates the values configured in the origin command as the initial and incremental subnet sizes that would be requested by the pool named Green. The Total addresses
field is a count of all the usable addresses in the pool. The Leased addresses field is a total count of how many bindings
were created from the pool. The Pending event field shows subnet request, which means that a subnet request is pending for
the pool. The subnet request was scheduled because the Leased addresses count has exceeded the high utilization level of the
pool. Subnets currently added to pool Green are shown in sequence. The Current index column shows the address that would be
allocated next from this subnet. The IP address range column shows the range of usable addresses from the subnet. The Leased
addresses column shows individual count of bindings created from each subnet. Three subnets are currently added to pool Green.
The first two subnets have used all their addresses and thus the Current index is showing 0.0.0.0.
Notice that pool Green and pool Global can have the same subnet (172.16.0.1-172.16.0.6) because pool Green is configured to
be in VRF Green, while pool Global is configured to be in the global address space.
Example:
Router# show ip dhcp pool
Pool Green :
Utilization mark (high/low) : 50 / 30
Subnet size (first/next) : 24 / 24 (autogrow)
VRF name : Green
Total addresses : 18
Leased addresses : 13
Pending event : subnet request
3 subnets are currently in the pool :
Current index IP address range Leased addresses
0.0.0.0 172.16.0.1 - 172.16.0.6 6
0.0.0.0 172.16.0.9 - 172.16.0.14 6
172.16.0.18 172.16.0.17 - 172.16.0.22 1
Pool Global :
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 24 / 24 (autogrow)
Total addresses : 6
Leased addresses : 0
Pending event : none
1 subnet is currently in the pool :
Current index IP address range Leased addresses
172.16.0.1 172.16.0.1 - 172.16.0.6 0
Step 3
show ip dhcp binding
The following output shows the bindings from pool Green. The Type field shows On-demand, which indicates that the address
binding was created for a PPP session. The Lease expiration field shows Infinite, which means that the binding is valid as
long as the session is up. If a subnet must be released back to the leasing server while the session is still up, the session
is reset so that it will be forced to obtain a new IP address. The Hardware address column for an On-demand entry shows the
identifier for the session as detected by PPP. There are no bindings shown under the Bindings from all pools not associated
with VRF field because the Global pool has not allocated any addresses.
Example:
Router# show ip dhcp binding
Bindings from all pools not associated with VRF:
IP address Hardware address Lease expiration Type
Bindings from VRF pool Green:
IP address Hardware address Lease expiration Type
172.16.0.1 5674.312d.7465.7374. Infinite On-demand
2d38.3930.39
172.16.0.2 5674.312d.7465.7374. Infinite On-demand
2d38.3839.31
172.16.0.3 5674.312d.7465.7374. Infinite On-demand
2d36.3432.34
172.16.0.4 5674.312d.7465.7374. Infinite On-demand
2d38.3236.34
172.16.0.5 5674.312d.7465.7374. Infinite On-demand
2d34.3331.37
172.16.0.6 5674.312d.7465.7374. Infinite On-demand
2d37.3237.39
172.16.0.9 5674.312d.7465.7374. Infinite On-demand
2d39.3732.36
172.16.0.10 5674.312d.7465.7374. Infinite On-demand
2d31.3637
172.16.0.11 5674.312d.7465.7374. Infinite On-demand
2d39.3137.36
172.16.0.12 5674.312d.7465.7374. Infinite On-demand
2d37.3838.30
172.16.0.13 5674.312d.7465.7374. Infinite On-demand
2d32.3339.37
172.16.0.14 5674.312d.7465.7374. Infinite On-demand
2d31.3038.31
172.16.0.17 5674.312d.7465.7374. Infinite On-demand
2d38.3832.38
172.16.0.18 5674.312d.7465.7374. Infinite On-demand
2d32.3735.31
Troubleshooting Tips
You can determine the client identifier by using the
debug ip dhcp server packet command. In the following sample output, the client is identified by the value 0b07.1134.a029:
Device# debug ip dhcp server packet
DHCPD:DHCPDISCOVER received from client 0b07.1134.a029 through relay 10.1.0.253.
DHCPD:assigned IP address 10.1.0.3 to client 0b07.1134.a029.
.
.
.
Monitoring and Maintaining the ODAP
This task shows how to monitor and maintain the ODAP.
Note the following behavior for the clear ip dhcp binding , clear ip dhcp conflict , and clear ip dhcp subnet commands:
If you do not specify the pool pool-name option and an IP address is specified, it is assumed that the IP address is an address in the global address space and will
look among all the non-VRF DHCP pools for the specified binding/conflict/subnet.
If you do not specify the pool pool-name option and the * option is specified, it is assumed that all automatic/ or on-demand bindings/conflicts/subnets in all VRF
and non-VRF pools are to be deleted.
If you specify both the pool pool-name option and the * option, all automatic or on-demand bindings/conflicts/subnets in the specified pool only will be cleared.
If you specify the pool pool-name option and an IP address, the specified binding/conflict or the subnet containing the specified IP address will be deleted
from the specified pool.
SUMMARY STEPS
enable
clear ip dhcp [pool pool-name]binding {* | address}
clear ip dhcp [pool pool-name] conflict {* | address}
clear ip dhcp [pool pool-name] subnet {* |address}
debug dhcp details
debug ip dhcp server events
show ip dhcp import
show ip interface [typenumber]
show ip dhcp pool pool-name
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
clear ip dhcp [pool pool-name]binding {* | address}
Example:
Router# clear ip dhcp binding *
Deletes an automatic address binding or objects from a specific pool from the DHCP server database.
Step 3
clear ip dhcp [pool pool-name] conflict {* | address}
Example:
Router# clear ip dhcp conflict *
Clears an address conflict or conflicts from a specific pool from the DHCP server database.
Step 4
clear ip dhcp [pool pool-name] subnet {* |address}
Example:
Router# clear ip dhcp subnet *
Clears all currently leased subnets in the named DHCP pool or all DHCP pools if name is not specified.
Step 5
debug dhcp details
Example:
Router# debug dhcp details
Monitors the subnet allocation/releasing in the on-demand address pools.
Step 6
debug ip dhcp server events
Example:
Router# debug ip dhcp server events
Reports DHCP server events, like address assignments and database updates.
Step 7
show ip dhcp import
Example:
Router# show ip dhcp import
Displays the option parameters that were imported into the DHCP server database.
Step 8
show ip interface [typenumber]
Example:
Router# show ip interface
Displays the usability status of interfaces configured for IP.
Step 9
show ip dhcp pool pool-name
Example:
Router# show ip dhcp pool green
Displays DHCP address pool information.
How to Configure DHCP ODAP Subnet Allocation Server Support
Configuring a Global Pool on a Subnet Allocation Server
Perform this task to configure a global subnet pool on a subnet allocation server.
Global Subnet Pools
Global subnet pools are created in a centralized network. The ODAP manager allocates subnets from the subnet allocation server
based on subnet availability. When the ODAP manager allocates a subnet, the subnet allocation server creates a subnet binding.
This binding is stored in the DHCP database for as long as the ODAP manager requires the address space. The binding is destroyed
and the subnet is returned to the subnet pool only when the ODAP manager releases the subnet as address space utilization
decreases.
SUMMARY STEPS
enable
configure terminal
ip dhcp pool pool-name
network network-number [mask|
/ prefix-length]
subnet prefix-length prefix-length
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip dhcp pool pool-name
Example:
Router(config)# ip dhcp pool GLOBAL-POOL
Enters DHCP pool configuration mode and specifies the subnet pool name.
Configures the subnet number and mask for a DHCP address pool on a DHCP server.
The subnet mask or the prefix length can be configured in this step. The values that can be configured for the
prefix-length argument follow CIDR bit count notation. The forward slash character must be used when configuring the
prefix-length argument.
Step 5
subnet prefix-length prefix-length
Example:
Router(dhcp-config)# subnet prefix-length 8
Configures the subnet prefix length. The range of the
prefix-length argument is from 1 to 31.
This command configures the number of IP addresses that each subnet is configured to allocate from the subnet pool. The values
that can be configured for the
prefix-length argument follow CIDR bit count notation format.
Configuring a VRF Subnet Pool on a Subnet Allocation Server
VRF Subnet Pools
A subnet allocation server can be configured to assign subnets from VRF subnet allocation pools for MPLS VPN clients. VPN
routes between the ODAP manager and the subnet allocation server are configured based on VRF name or VPN ID configuration.
The VRF and VPN ID are configured to maintain routing information that defines customer VPN sites. The VPN customer site (or
Customer Equipment [CE]) is attached to a provider edge (PE) router. The VRF is used to specify the VPN and consists of an
IP routing table, a derived Cisco Express Forwarding (CEF) table, a set of interfaces that use the forwarding table, and a
set of rules and routing protocol parameters that control the information that is included in the routing table.
Before you begin
The VRF name and VPN ID can be configured on the ODAP manager and subnet allocation server prior to the configuration of the
subnet allocation pool.
SUMMARY STEPS
enable
configure terminal
ip dhcp pool pool-name
vrf vrf-name
network network-number[mask |/prefix-length]
subnet prefix-length prefix-length
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip dhcp pool pool-name
Example:
Router(config)# ip dhcp pool VRF-POOL
Enters DHCP pool configuration mode and specifies the subnet pool name.
Step 4
vrf vrf-name
Example:
Router(dhcp-config)# vrf RED
Associates the on-demand address pool with a VPN routing and forwarding (VRF) instance name (or tag).
The vrf keyword and vrf-name argument are used to specify the VPN for the VRF pool. The vrf-name argument must match the VRF name (or tag) that is configured for the client.
Step 5
network network-number[mask |/prefix-length]
Example:
Router(dhcp-config)# network 10.1.1.0 /24
Configures the subnet number and mask for a DHCP address pool on a Cisco IOS XE DHCP server.
The subnet mask or the prefix length can be configured in this step. The values that can be configured for the prefix-lengthargument follow CIDR bit count notation. The forward slash character must be used when configuring the prefix-length argument.
Step 6
subnet prefix-length prefix-length
Example:
Router(dhcp-config)# subnet prefix-length 16
Configures the subnet prefix length. The range of the prefix-length argument is from 1 to 31.
This command configures the number of IP addresses that each subnet is configured to allocate from the subnet pool. The values
that can be configured for the prefix-lengthargument follow CIDR bit count notation format.
Using a VPN ID to Configure a VRF Subnet Pool on a Subnet Allocation Server
Perform this task to configure a VRF subnet pool, using a VPN ID, on a subnet allocation server.
VRF Pools and VPN IDs
A subnet allocation server can also be configured to assign subnets from VPN subnet allocation pools based on the VPN ID of
a client. The VPN ID (or Organizational Unique Identifier [OUI]) is a unique identifier assigned by the IEEE.
Before you begin
The VRF name and VPN ID can be configured on the ODAP manager and subnet allocation server prior to the configuration of the
subnet allocation pool.
SUMMARY STEPS
enable
configure terminal
ip vrf vrf-name
rd route-distinguisher
route-target both route-target-number
vpn id vpn-id
exit
ip dhcp pool pool-name
vrf vrf-name
network network-number[mask |/prefix-length]
subnet prefix-length prefix-length
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip vrf vrf-name
Example:
Router(config)#ip vrf RED
Creates a VRF routing table and specifies the VRF name (or tag).
The vrf-name argument must match the VRF name that is configured for the client and VRF pool in Step 9.
Step 4
rd route-distinguisher
Example:
Router(config-vrf)# rd 100:1
Creates routing and forwarding tables for a VRF instance created in Step 3.
There are two formats for configuring the route distinguisher argument. It can be configured in the as-number:network number
(ASN:nn) format, as shown in the example, or it can be configured in the IP address:network number format (IP-address:nn).
Step 5
route-target both route-target-number
Example:
Router(config-vrf)# route-target both 100:1
Creates a route-target extended community for the VRF instance that was created in Step 3.
The both keyword is used to specify which routes should be imported and exported to the target VPN extended community (or the ODAP
manager in this configuration).
The route-target-numberargument follows the same format as the route-distinguisher argument in Step 4. These two arguments must match.
Step 6
vpn id vpn-id
Example:
Router(config-vrf)# vpn id 1234:123456
Configures the VPN ID.
This command is only used if the client (ODAP manager) is also configured with or assigned a VPN ID.
Step 7
exit
Example:
Router(config-vrf)# exit
Exits VRF configuration mode and enters global configuration mode.
Step 8
ip dhcp pool pool-name
Example:
Router(config)# ip dhcp pool VPN-POOL
Enters DHCP pool configuration mode and specifies the subnet pool name.
The VRF keyword and vrf-name argument are used to specify the VPN for the VRF pool. The vrf-name argument must match the VRF name (or tag) that is configured for the client.
Step 9
vrf vrf-name
Example:
Router(dhcp-config)#vrf RED
Associates the on-demand address pool with a VRF instance name.
The vrf-name argument must match the vrf-name argument that was configured in Step 3.
Step 10
network network-number[mask |/prefix-length]
Example:
Router(dhcp-config)# network 192.168.0.0 /24
Configures the subnet number and mask for a DHCP address pool on a Cisco IOS XE DHCP server.
The subnet mask or the prefix length can be configured in this step. The values that can be configured for the prefix-lengthargument follow CIDR bit count notation. The forward slash character must be used when configuring the prefix-length argument.
Step 11
subnet prefix-length prefix-length
Example:
Router(dhcp-config)# subnet prefix-length 16
Configures the subnet prefix length.
The range of the prefix-length argument is from 1 to 31.
This command configures the number of IP addresses that each subnet is configured to allocate from the subnet pool. The values
that can be configured for the prefix-length argument follow CIDR bit count notation format.
Verifying the Subnet Allocation and DHCP Bindings
Perform this task to verify subnet allocation and DHCP bindings.
The show ip dhcp pool and show ip dhcp binding commands do not need to be issued together or even in the same session as there are differences in the information that is
provided. These commands, however, can be used to display and verify subnet allocation and DHCP bindings. The show running-config | begin dhcp command is used to display the local configuration of DHCP and the configuration of the subnet prefix-length command.
SUMMARY STEPS
enable
show running-config | begin dhcp
show ip dhcp pool [pool-name]
show ip dhcp binding [ip-address]
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
show running-config | begin dhcp
Example:
Router# show running-config | begin dhcp
Used to display the local configuration of the router.
The configuration of the subnet prefix-length command will be displayed under the DHCP pools, for which subnet lease allocation has been configured. The subnet allocation
size will be shown, following this command, in CIDR bit count notation.
The sample output is filtered with the begin keyword to start displaying output at the DHCP section of the running configuration.
Step 3
show ip dhcp pool [pool-name]
Example:
Router# show ip dhcp pool
Displays information about DHCP pools.
This command can be used to verify subnet allocation pool configuration on both the subnet allocation server and the ODAP
manager.
The output of this command displays specific address pool information, including the name of the pool, utilization of address
space, subnet size, number of total addresses, number of leased address, and pending events.
Step 4
show ip dhcp binding [ip-address]
Example:
Router# show ip dhcp binding
Displays information about DHCP bindings.
This command can be used to display subnet allocation to DHCP binding mapping information.
The output from this command displays binding information for individual IP address assignment and allocated subnets. The
output that is generated for DHCP IP address assignment and subnet allocation is almost identical, except that subnet leases
display an IP address followed by the subnet mask (which shows the size of the allocated subnet). Bindings for individual
IP address only display an IP address and are not followed by a subnet mask.
Troubleshooting the DHCP ODAP Subnet Allocation Server
Perform this task to troubleshoot the DHCP ODAP subnet allocation server.
SUMMARY STEPS
enable
debug dhcp [detail ]
debug ip dhcp server {events | packets | linkage }
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
debug dhcp [detail ]
Example:
Router# debug dhcp detail
Displays debugging information about DHCP client activities and monitors the status of DHCP packets.
This example is issued with the detail keyword on the ODAP manager. The detail keyword is used to display and monitor the lease entry structure of the client and the state transitions of lease entries.
This command also displays the values of the op, htype, hlen, hops, server identifier option, xid, secs, flags, ciaddr, yiaddr,
siaddr, and giaddr fields of the DHCP packet that are shown in addition to the length of the options field.
Step 3
debug ip dhcp server {events | packets | linkage }
Example:
Router# debug ip dhcp server packets
Example:
Router# debug ip dhcp server events
Enables DHCP server debugging.
This example is issued with the packets and events keywords on the subnet allocation server. The output displays lease transition and reception, as well as database
information.
Configuration Examples for DHCP Server On-Demand Address Pool Manager
Defining DHCP ODAPs as the Global Default Mechanism Example
The following example shows how to configure the on-demand address pooling mechanism to be used to serve an address request
from a PPP client.
ip address-pool dhcp-pool
!
ip dhcp pool Green-pool
Defining DHCP ODAPs on an Interface Example
The following example shows how to configure an interface to retrieve an IP address from an on-demand address pool:
interface Virtual-Template1
ip vrf forwarding green
ip unnumbered loopback1
ppp authentication chap
peer default ip address dhcp-pool
!
Configuring the DHCP Pool as an ODAP Example
The following example shows two ODAPs configured to obtain their subnets from an external DHCP server:
Router# show run
Building configuration...
Current configuration : 3943 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
no logging console
enable password lab
!
username vpn_green_net1 password 0 lab
username vpn_red_net1 password 0 lab
ip subnet-zero
!
ip dhcp pool green_pool
vrf Green
utilization mark high 60
utilization mark low 40
origin dhcp subnet size initial /24 autogrow /24
!
ip dhcp pool red_pool
vrf Red
origin dhcp
!
ip vrf Green
rd 200:1
route-target export 200:1
route-target import 200:1
!
ip vrf Red
rd 300:1
route-target export 300:1
route-target import 300:1
ip cef
ip address-pool dhcp-pool
!
no voice hpi capture buffer
no voice hpi capture destination
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Loopback1
ip vrf forwarding Green
ip address 100.10.10.1 255.255.255.255
!
interface Loopback2
ip vrf forwarding Red
ip address 110.10.10.1 255.255.255.255
!
interface ATM2/0/0
no ip address
shutdown
no atm ilmi-keepalive
!
interface ATM3/0/0
no ip address
no atm ilmi-keepalive
!
interface GigabitEthernet0/0/0
ip address 10.0.105.12 255.255.255.224
duplex half
!
interface GigabitEthernet0/0/1
ip address 150.10.10.1 255.255.255.0
duplex half
!
interface GigabitEthernet0/0/2
ip address 120.10.10.1 255.255.255.0
duplex half
tag-switching ip
!
interface Virtual-Template1
ip vrf forwarding Green
ip unnumbered Loopback1
ppp authentication chap
!
interface Virtual-Template2
ip vrf forwarding Green
ip unnumbered Loopback1
ppp authentication chap
!
interface Virtual-Template3
ip vrf forwarding Green
ip unnumbered Loopback1
ppp authentication chap
!
interface Virtual-Template4
ip vrf forwarding Red
ip unnumbered Loopback2
ppp authentication chap
!
interface Virtual-Template5
ip vrf forwarding Red
ip unnumbered Loopback2
ppp authentication chap
!
interface Virtual-Template6
ip vrf forwarding Red
ip unnumbered Loopback2
ppp authentication chap
!
router ospf 100
log-adjacency-changes
redistribute connected
network 1.1.1.1 0.0.0.0 area 0
network 120.10.10.0 0.0.0.255 area 0
network 150.10.10.0 0.0.0.255 area 0
!
router bgp 100
no synchronization
bgp log-neighbor-changes
neighbor 3.3.3.3 remote-as 100
neighbor 3.3.3.3 update-source Loopback0
!
address-family ipv4 vrf Red
redistribute connected
redistribute static
no auto-summary
no synchronization
network 110.0.0.0
exit-address-family
!
address-family ipv4 vrf Green
redistribute connected
redistribute static
no auto-summary
no synchronization
network 100.0.0.0
exit-address-family
!
address-family vpnv4
neighbor 3.3.3.3 activate
neighbor 3.3.3.3 send-community extended
exit-address-family
!
ip classless
ip route 172.19.0.0 255.255.0.0 10.0.105.1
no ip http server
ip pim bidir-enable
!
call rsvp-sync
!
mgcp profile default
!
dial-peer cor custom
!
gatekeeper
shutdown
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password lab
login
!
end
Configuring the DHCP Pool as an ODAP for Non-MPLS VPNs Example
The following example shows how to configure an interface to retrieve an IP address from an on-demand address pool. In this
example, two non-VRF ODAPs are configured. There are two virtual-templates and two DHCP address pools, usergroup1 and usergroup2.
Each virtual-template interface is configured to obtain IP addresses for the peer from the associated address pool.
!
ip dhcp pool usergroup1
origin dhcp subnet size initial /24 autogrow /24
lease 0 1
!
ip dhcp pool usergroup2
origin dhcp subnet size initial /24 autogrow /24
lease 0 1
!
interface virtual-template1
ip unnumbered loopback1
peer default ip address dhcp-pool usergroup1
!
interface virtual-template2
ip unnumbered loopback1
peer default ip address dhcp-pool usergroup2
Configuring AAA and RADIUS Example
The following example shows one pool “Green” configured to obtain its subnets from the AAA (RADIUS) server located at IP address
172.16.1.1:
!
aaa new-model
!
aaa authorization configuration default group radius
aaa accounting network default start-stop group radius
aaa session-id common
!
ip subnet-zero
!
ip dhcp ping packets 0
!
ip dhcp pool Green
vrf Green
utilization mark high 50
utilization mark low 30
origin aaa subnet size initial /28 autogrow /28
!
ip vrf Green
rd 300:1
route-target export 300:1
route-target import 300:1
!
interface GigabitEthernet0/1/1
ip address 172.16.1.12 255.255.255.0
duplex half
!
interface Virtual-Template1
ip vrf forwarding Green
no ip address
!
ip radius source-interface GigabitEthernet0/1/1
!
!IP address of the RADIUS server host
radius-server host 172.16.1.1 auth-port 1645 acct-port 1646
radius-server retransmit 3
radius-server attribute 32 include-in-access-req
radius-server attribute 44 include-in-access-req
radius-server key cisco
radius-server vsa send accounting
radius-server vsa send authentication
Configuring a Global Pool for a Subnet Allocation Server Example
The following example shows how to configure a router to be a subnet allocation server and create a global subnet allocation
pool named “GLOBAL-POOL” that allocates subnets from the 10.0.0.0/24 network. The configuration of the subnet prefix-length command in this example configures the size of each subnet that is allocated from the subnet pool to support 254 host IP
addresses.
ip dhcp pool GLOBAL-POOL
network 10.0.0.0 255.255.255.0
subnet prefix-length 24
!
Configuring a VRF Pool for a Subnet Allocation Server Example
The following example shows how to configure a router to be a subnet allocation server and create a VRF subnet allocation
pool named “VRF-POOL” that allocates subnets from the 172.16.0.0/16 network and configures the VPN to match the VRF named
“RED.” The configuration of the subnet prefix-length command in this example configures the size of each subnet that is allocated from the subnet pool to support 62 host IP addresses.
ip dhcp pool VRF-POOL
vrf RED
network 172.16.0.0 /16
subnet prefix-length 26
!
Using a VPN ID to Configure a VRF Pool on a Subnet Allocation Server Example
The following example shows how to configure a router to be a subnet allocation server and create a VRF subnet allocation
pool named “VRF-POOL” that allocates subnets from the 192.168.0.0/24 network and configures the VRF named “RED.” The VPN ID
must match the unique identifier that is assigned to the client site. The route target and route distinguisher are configured
in the as-number:network-number format. The route target and route distinguisher must match. The configuration of the subnet prefix-length command in this example configures the size of each subnet that is allocated from the subnet pool to support 30 host IP addresses.
ip vrf RED
rd 100:1
route-target both 100:1
vpn id 1234:123456
exit
ip dhcp pool VPN-POOL
vrf RED
network 192.168.0.0 /24
subnet prefix-length /27
exit
Verifying Local Configuration on a Subnet Allocation Server Example
The following example is output from the show running-config command. This command can be used to verify the local configuration on a subnet allocation server. The output from this command
displays the configuration of the subnet prefix-length command under the DHCP pool named “GLOBAL-POOL.” The total size of
the subnet allocation pool is set to 254 addresses with the network command. The configuration of the subnet prefix-length command configures this pool to allocate a subnet that will support 254 host IP addresses. Because the total pool size supports
only 254 addresses, only one subnet can be allocated from this pool.
Router# show running-config | begin dhcp
ip dhcp pool GLOBAL-POOL
network 10.0.0.0 255.255.255.0
subnet prefix-length 24
!
Verifying Address Pool Allocation Information Example
The following examples are output from the show ip dhcp pool command. This command can be used to verify subnet allocation pool configuration on the subnet allocation server and the ODAP
manager. The output from this command displays information about the address pool name, utilization level, configured subnet
size, total number of addresses (from subnet), pending events, and specific subnet lease information.
The following sample output shows that the configured subnet allocation size is /24 (254 IP addresses), that there is a pending
subnet allocation request, and there are no subnets in the pool:
Router> show ip dhcp pool ISP-1
Pool ISP-1 :
Utilization mark (high/low) :100 / 0
Subnet size (first/next) :24 / 24 (autogrow)
Total addresses :0
Leased addresses :0
Pending event :subnet request
0 subnet is currently in the pool
The next example shows that the configured subnet allocation size is /24 (254 IP address), the configured VRF name is “RED”,
and a subnet containing 254 IP addresses has been allocated but no IP addresses have been leased from the subnet:
Router> show ip dhcp pool SUBNET-ALLOC
Pool SUBNET-ALLOC :
Utilization mark (high/low) :100 / 0
Subnet size (first/next) :24 / 24 (autogrow)
VRF name :RED
Total addresses :254
Leased addresses :0
Pending event :none
1 subnet is currently in the pool :
Current index IP address range Leased addresses
10.0.0.1 10.0.0.1 - 10.0.0.254 0
Verifying Subnet Allocation and DHCP Bindings Example
The following example is from the show ip dhcp binding command. This command can be used to display subnet allocation to DHCP binding mapping information. The output of this command
shows the subnet lease to MAC address mapping, the lease expiration, and the lease type (subnet lease bindings are configured
to be automatically created and released by default). The output that is generated for DHCP IP address assignment and subnet
allocation is almost identical, except that subnet leases display an IP address followed by the subnet mask (which shows the
size of the allocated subnet) in CIDR bit count notation. Bindings for individual IP address only display an IP address and
are not followed by a subnet mask.
Router# show ip dhcp binding
Bindings from all pools not associated with VRF:
IP address Client-ID/ Lease expiration Type
Hardware address/
User name
10.0.0.0/26 0063.6973.636f.2d64. Mar 29 2009 04:36 AM Automatic
656d.6574.6572.2d47.
4c4f.4241.4c
Additional References
The following sections provide references related to configuring the DHCP ODAP manager.
Cisco IOS IP Addressing Services Command Reference
DHCP conceptual information
“DHCP Overview” module
DHCP server configuration
“Configuring the Cisco IOS XE DHCP Server” module
DHCP client configuration
“Configuring the Cisco IOS XE DHCP Client” module
DHCP relay agent configuration
“Configuring the Cisco IOS XE DHCP Relay Agent” module
DHCP advanced features
“Configuring DHCP Services for Accounting and Security” module
Standards
Standards
Title
No new or modified standards are supported by this functionality.
--
MIBs
MIBs
MIBs Link
No new or modified MIBs are supported by this feature.
To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator
found at the following URL:
Clarifications and Extensions for the Bootstrap Protocol
RFC 2131
Dynamic Host Configuration Protocol
RFC 2685
Virtual Private Networks Identifier
RFC 3046
DHCP Relay Information Option
Technical Assistance
Description
Link
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and
resolving technical issues with Cisco products and technologies.
To receive security and technical information about your products, you can subscribe to various services, such as the Product
Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.
Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.
Feature Information for the DHCP Server On-Demand Address Pool Manager
The following table provides release information about the feature or features described in this module. This table lists
only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco
Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for the DHCP On-Demand Address Pool Manager
Feature Name
Releases
Feature Configuration Information
DHCP Server On-Demand Address Pool Manager for Non-MPLS VPNs
Cisco IOS XE Release 2.3
Cisco IOS XE Release 3.9S
This feature was enhanced to provide ODAP support for non-MPLS VPNs.
The following command was modified by this feature:
peer default ip address
DHCP ODAP Server Support
Cisco IOS XE Release 2.3
Cisco IOS XE Release 3.9S
This feature introduces the capability to configure a DHCP server (or router) as a subnet allocation server. This capability
allows the Cisco IOS DHCP server to be configured with a pool of subnets for lease to ODAP clients.
The following commands were introduced or modified by this feature:
subnet prefix-length and
show ip dhcp binding
DHCP Server On-Demand Address Pool Manager
Cisco IOS XE Release 2.3
The ODAP manager is used to centralize the management of large pools of addresses and simplify the configuration of large
networks. ODAP provides a central management point for the allocation and assignment of IP addresses. When a Cisco IOS router
is configured as an ODAP manager, pools of IP addresses are dynamically increased or reduced in size depending on the address
utilization level.
The following commands were introduced by this feature:
aaa session-id ,
clear ip dhcp subnet ,
ip address pool ,
ip dhcp aaa default username ,
origin ,
show ip dhcp pool ,
utilization mark high ,
utilization mark low ,
vrf .
The following commands were modified by this feature:
clear ip dhcp binding ,
clear ip dhcp conflict ,
ip address-pool ,
peer default ip address .
Glossary
AAA --authentication, authorization, and accounting. Suite of network security services that provide the primary framework through
which access control can be set up on your Cisco router or access server.
Cisco Access Registrar --A RADIUS server that supports service provider deployment of access services by centralizing AAA information and simplifying
provisioning and management.
client --A host trying to configure its interface (obtain an IP address) using DHCP or BOOTP protocols.
DHCP --Dynamic Host Configuration Protocol.
incremental subnet size --The desired size of the second and subsequent subnets requested for an on-demand pool.
initial subnet size --The desired size of the first subnet requested for an on-demand pool.
IPCP --IP Control Protocol. Protocol that establishes and configures IP over PPP.
MPLS --Multiprotocol Label Switching. Emerging industry standard upon which tag switching is based.
ODAP --on-demand address pool.
PE router --provider edge router.
PPP --Point-to-Point Protocol.
RADIUS -- Remote Authentication Dial-In User Service. Database for authenticating modem and ISDN connections and for tracking connection
time.
relay agent --A router that forwards DHCP and BOOTP messages between a server and a client on different subnets.
releasable subnet --A leased subnet that has no address leased from it.
server --DHCP or BOOTP server.
VHG --Virtual Home Gateway. A Cisco IOS software component that terminates PPP sessions. It is owned and managed by the service
provider on behalf of its customer to provide access to remote users of that customers network. A single service provider
device (router) can host multiple VHGs of different customers. A VHG can be dynamically brought up and down based on the access
pattern of the remote users. Note that there is no single IOS feature called the VHG; it is a collection of function and features.
VHG/PE router--A device that terminates PPP sessions and maps the remote users to the corresponding MPLS VPNs.
VPN --Virtual Private Network. Enables IP traffic to use tunneling to travel securely over a public TCP/IP network.
VPN information --In this document, VPN information refers to VRF name or VPN ID.
VRF --VPN routing and forwarding instance. A VRF consists of an IP routing table, a derived forwarding table, a set of interfaces
that use the forwarding table, and a set of rules and routing protocols that determine what goes into the forwarding table.
In general, a VRF includes the routing information that defines a customer VPN site that is attached to a PE router. Each
VPN instantiated on the PE router has its own VRF.
Feedback