cEigrpAcksSuppressed

Total number of individual acknowledgment packets that have been suppressed and combined in an already enqueued outbound reliable packet on an interface.

cEigrpAuthKeyChain

The name of the authentication key chain that is configured on the interface. The key chain is a reference to the set of secret keys that need to be accessed to determine the key string that needs to be used.

cEigrpAuthMode

The authentication mode that is configured for traffic that uses the interface. A value of 0 is displayed when no authentication is enabled. A value of 1 is displayed when message digest algorithm 5 (MD5) authentication is enabled.

cEigrpCRpkts

Total number conditional receive (CR) packets sent from the interface.

cEigrpHelloInterval

The configured time interval (in seconds) between hello packet transmissions on the interface.

cEigrpPacingReliable

The configured time interval (in milliseconds) between EIGRP packet transmissions on the interface when the reliable transport is used.

cEigrpPacingUnreliable

The configured time interval (in milliseconds) between EIGRP packet transmissions on the interface when the unreliable transport is used.

cEigrpPeerCount

Total number of neighbor adjacencies formed through the interface.

cEigrpPendingRoutes

Total number of routing updates that are queued for transmission on the interface.

cEigrpMcastExcept

Total number of EIGRP multicast exception transmissions that have occurred on the interface.

cEigrpMeanSrtt

The computed smooth round-trip time (SRTT) for packets that were transmitted to and received from all neighbors on the interface.

cEigrpMFlowTimer

The configured multicast flow control timer value (in milliseconds) for the interface.

cEigrpOOSrcvd

Total number of out-of-sequence packets received on the interface.

cEigrpRetranSent

Total number of packet retransmissions sent from the interface.

cEigrpRMcasts

Total number of reliable (acknowledgment required) multicast packets that were transmitted on the interface.

cEigrpRUcasts

Total number of reliable (acknowledgment required) unicast packets that were transmitted on the interface.

cEigrpUMcasts

Total number of unreliable (no acknowledgment required) multicast packets that were transmitted on the interface.

cEigrpUUcasts

Total number of unreliable (no acknowledgment required) unicast packets that were transmitted on the interface.

cEigrpXmitNextSerial

The serial number of the next packet that is queued for transmission on the interface.

cEigrpXmitReliableQ

Total number of packets waiting in the reliable transport transmission queue (acknowledgment required).

cEigrpXmitUnreliableQ

Total number of packets waiting in the unreliable transport transmission queue (no acknowledgment required).

cEigrpHoldTime

The hold timer value for an adjacency with a neighbor. If this timer expires, the neighbor is declared down and removed from the neighbor table.

cEigrpLastSeq

The number of the last sequence of a packet transmitted to a neighbor. This table object value increases as the sequence number increases.

cEigrpPeerAddr

The source IP address of a neighbor that was used to establish an EIGRP adjacency with the local device. The source IP address can be an IPv4 or IPv6 address.

cEigrpPeerAddrType

The protocol type of the remote source IP address that was used by a neighbor to establish an EIGRP adjacency with the local device. The protocol type can be IPv4 or IPv6.

cEigrpPeerIfIndex

The index of the local interface through which a neighbor can be reached.

cEigrpPeerInterface

The name of the local interface through which a neighbor can be reached.

cEigrpPktsEnqueued

Total number of EIGRP packets (all types) currently queued for transmission to a neighbor.

cEigrpRetrans

Cumulative number of packets retransmitted to a neighbor while the neighbor is in an up state.

cEigrpRetries

Total number of times an unacknowledged packet is sent to a neighbor.

cEigrpRto

The computed retransmission timeout (RTO) for a neighbor. The value for this table object is computed as an aggregate average of the time required for packet delivery.

cEigrpSrtt

The computed smooth round-trip time (SRTT) for packets that are transmitted to and received from a neighbor.

cEigrpUpTime

The period for which the EIGRP adjacency to a neighbor has been in an up state. The time period is displayed in hours:minutes:seconds.

cEigrpVersion

EIGRP version information reported by a remote neighbor.

cEigrpActive

Status of routes in the topology table. The value for this table object is displayed on a per-route basis. A value of 1 is displayed when a route is in active state. A value of 2 is displayed when a route is in passive state (normal).

cEigrpDestSuccessors

Total number of successors (a successor is a route that is the next hop to a destination network) for a topology table entry. The topology table will contain a successor for each path to a given destination. This table object value increases each time a successor is added.

cEigrpDistance

The computed distance to the destination network entry from the local router.

cEigrpFdistance

The feasible (best) distance to a destination network. This value is used to calculate a feasible successor for a topology table entry.

cEigrpNextHopAddress

The next-hop IP address for a route in a topology table entry. The next hop can be an IPv4 or IPv6 address.

cEigrpNextHopAddressType

The protocol type of the next-hop IP address for a route in a topology table entry. The protocol type can be IPv4 or IPv6.

cEigrpNextHopInterface

The interface through which the next-hop IP address is reached to forward traffic to the destination.

cEigrpReportDistance

The computed distance to the destination network in the topology entry as reported by the originator of the route.

cEigrpRouteOriginAddr

The IP address of the router that originated the route in the topology table entry. This table is populated only if the topology table entry was not locally originated. The route origin address can be an IPv4 or IPv6 address.

cEigrpRouteOriginType

The protocol type of the IP address defined as the origin of the topology route entry. The protocol type can be IPv4 or IPv6.

cEigrpStuckInActive

Stuck-in-active (SIA) status of a route. The value for this table object is displayed on a per-route basis. A value of 1 is displayed when a route is in SIA state (that is, no reply has been received for queries about alternate paths). SIA queries are transmitted when a route is placed in this state.

cEigrpAcksRcvd

Total number of acknowledgment packets that are received in response to the transmitted update packets. This table object value increases as packets are received.

cEigrpAcksSent

Total number of acknowledgment packets that are transmitted in response to received update packets. This table object value increases as packets are transmitted.

cEigrpAsRouterId

The configured or automatically selected router ID in IP address format. This table object is updated if the router ID is manually reconfigured or if the IP address that was automatically selected is removed.

cEigrpAsRouterIdType

The type of IP address that is used as the router ID. The value for this table object is an IPv4 address.

cEigrpInputQDrops

Total number of packets that are dropped from the input queue because the input queue was full. This table object value increases each time a packet is dropped.

cEigrpInputQHighMark

The highest number of packets that have been in the input queue. This table object value increases only when the previous highest number is exceeded.

cEigrpHeadSerial

Internal sequencing number (serial) that is applied to EIGRP topology table routes. Routes are sequenced starting with 1. A value of 0 is displayed when there are no routes in the topology table. The “Head” serial number is applied to the first route in the sequence.

cEigrpHellosRcvd

Total number of received hello packets. This table object value increases as packets are received.

cEigrpHellosSent

Total number of hello packets transmitted. This table object value increases as packets are transmitted.

cEigrpNbrCount

Total number of live neighbors. This table object value increases or decreases as peering sessions are established or expired.

cEigrpNextSerial

Serial number that is applied to the next route in the sequence.

cEigrpQueriesSent

Total number of alternate route query packets that are transmitted. This table object value increases as packets are transmitted.

cEigrpQueriesRcvd

Total number of alternate route query packets that are received. This table object value increases as packets are received.

cEigrpRepliesSent

Total number of reply packets that are transmitted in response to the received query packets. This table object value increases as packets are transmitted.

cEigrpRepliesRcvd

Total number of reply packets that are received in response to transmitted query packets. This table object value increases as packets are received.

cEigrpSiaQueriesSent

Total number of query packets that are sent in response to a destination that is in a stuck-in-active (SIA) state for a down peer. This table object value increases each time an SIA query packet is sent.

cEigrpSiaQueriesRcvd

Total number of SIA query packets that are received from neighbors searching for an alternate path to a destination. This table object value increases each time an SIA query packet is received.

cEigrpTopoRoutes

Total number of EIGRP-derived routes in the topology table. This table object value increases if a route is added.

cEigrpUpdatesRcvd

Total number of routing update packets that are received. This table object value increases as packets are received.

cEigrpUpdatesSent

Total number of routing update packets that are transmitted. This table object value increases as packets are transmitted.

cEigrpXmitDummies

Total number of temporary entries in the topology table. Dummies are internal entries and not transmitted in routing updates.

cEigrpXmitPendReplies

Total number of replies expected in response to locally transmitted query packets. This table object contains a value of 0 until a route is placed in an active state.

cEigrpVpnName

The VPN routing and forwarding (VRF) name. Only VRFs that are configured to run an EIGRP routing process are populated.

cEigrpAuthFailureEvent

When EIGRP message digest algorithm 5 (MD5) authentication is enabled on any interface and neighbor adjacencies are formed, a notification is sent if any adjacency goes down because of an authentication failure. This notification will be sent once per down event. This notification includes the source IP address of the neighbor from which the authentication failure occurred.

cEigrpNbrDownEvent

This notification is sent when a neighbor goes down for any reason, such as hold time expiry, neighbor shutdown, interface shutdown, SIA events, or authentication failure. If a neighbor is down because of an authentication failure, both cEigrpAuthFailureEvent and cEigrpNbrDownEvent notifications are sent.

cEigrpRouteStuckInActive

During the query phase for a new route to a destination network, the route is placed in active state (during which an alternate path is actively sought) and a query packet is broadcast to the network. If no replies are received for the query, SIA query packets are broadcast. If no replies are received for the SIA queries, the neighbor adjacency is dropped, the route is declared to be in an SIA state, and this notification is sent.