IP SLAs Configuration Guide, Cisco IOS XE Fuji 16.7.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This module describes how to configure an IP Service Level Agreements (SLAs) label switched path (LSP) Health Monitor. LSP
health monitors enable you to to proactively monitor Layer 3 Multiprotocol Label Switching (MPLS) Virtual Private Networks
(VPNs). This feature provides automated end-to-end verification in the control plane and data plane for all LSPs between the
participating Provider Edge (PE) devices. This end-to-end (PE-to-PE device) approach ensures that LSP connectivity is verified
along the paths that customer traffic is sent. Consequently, customer-impacting network connectivity issues that occur within
the MPLS core will be detected by the LSP Health Monitor. Once configured, the LSP Health Monitor will automatically create
and delete IP SLAs LSP ping or LSP traceroute operations based on network topology.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information,
see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module,
and to see a list of the releases in which each feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature
Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for LSP Health Monitor Operations
The participating PE devices of an LSP Health Monitor operation must support the MPLS LSP ping feature. It is recommended
that the Provider (P) devices also support the MPLS LSP Ping feature in order to obtain complete error reporting and diagnostics
information.
Ensure that the source PE device has enough memory to support the desired LSP Health Monitor functionality. Enabling the
LSP discovery option can potentially have a significant impact on device memory. If there is not enough memory available during
the LSP discovery process, the process will gracefully terminate and an error message will be displayed.
Note
The destination PE devices of an LSP Health Monitor operation do not require the IP SLAs Responder to be enabled.
Restrictions for LSP Health Monitor Operations
Once an LSP Health Monitor operation is started, its configuration parameters should not be changed until the operation has
ended. Changing the configuration parameters while the operation is actively running could cause delays in obtaining network
connectivity statistics.
Information About LSP Health Monitor Operations
Benefits of the LSP Health Monitor
End-to-end LSP connectivity measurements across equal-cost multipaths for determining network availability or testing network
connectivity in MPLS networks
Proactive threshold monitoring through SNMP trap notifications and syslog messages
Reduced network troubleshooting time for MPLS networks
Scalable network error detection using fast retry capability
Creation and deletion of IP SLAs operations based on network topology
Discovery of Border Gateway Protocol (BGP) next hop neighbors based on local VPN routing and forwarding instances (VRFs) and
global routing tables
Multioperation scheduling of IP SLAs operations
Pseudo-wire connectivity testing between MPLS network edges, with threshold violations and scalable operation scheduling
Monitoring and SNMP trap alerts for round-trip time (RTT) threshold violations, connection loss, and command response timeouts
How the LSP Health Monitor Works
The LSP Health Monitor feature provides the capability to proactively monitor Layer 3 MPLS VPNs. The general process for
how the LSP Health Monitor works is as follows:
The user configures an LSP Health Monitor operation and the BGP next hop neighbor discovery process is enabled.
Configuring an LSP Health Monitor operation is similar to configuring a standard IP SLAs operation. To illustrate, all operation
parameters for an LSP Health Monitor operation are configured after an identification number for the operation is specified.
However, unlike standard IP SLAs operations, these configured parameters are then used as the base configuration for the individual
IP SLAs LSP ping and LSP traceroute operations that will be created by the LSP Health Monitor. The LSP discovery process can
potentially have a significant impact on the memory and CPU of the source PE device. To prevent unnecessary device performance
issues, careful consideration should be taken when configuring the operational and scheduling parameters of an LSP Health
Monitor operation.
When the BGP next hop neighbor discovery process is enabled, a database of BGP next hop neighbors in use by any VRF associated
with the source PE device is generated based on information from the local VRF and global routing tables. For more information
about the BGP next hop neighbor discovery process, see the "Discovery of Neighboring PE Devices" section.
Note
By default, only a single path between the source and destination PE devices is discovered. If the LSP discovery option is
enabled, the equal-cost multipaths between the source and destination PE devices are discovered. For more information on how
the LSP discovery process works, see the "LSP Discovery Process" section.
The user configures proactive threshold monitoring parameters for the LSP Health Monitor operation. For more information
about proactive threshold monitoring, see the "Proactive Threshold Monitoring for the LSP Health Monitor" section.
Depending on the proactive threshold monitoring configuration options chosen, SNMP trap notifications or syslog messages
are generated as threshold violations are met.
The user configures multioperation scheduling parameters for the LSP Health Monitor operation. For more information about
multioperation scheduling, see the "Multioperation Scheduling for the LSP Health Monitor" section.
Once the LSP Health Monitor operation is started, a single IP SLAs operation is automatically created (based on parameters
configured in Step 1) for each applicable PE (BGP next hop) neighbor. The IP SLAs operations will measure network connectivity
between the source PE device and the discovered destination PE device. The start time and frequency of each measurement is
based on the multioperation scheduling parameters defined by the user.
Addition and Deletion of IP SLAs Operations
The LSP Health Monitor receives periodic notifications about BGP next hop neighbors that have been added to or removed from
a particular VPN. This information is stored in a queue maintained by the LSP Health Monitor. Based on the information in
the queue and user-specified time intervals, new IP SLAs operations are automatically created for newly discovered PE devices
and existing IP SLAs operations are automatically deleted for any PE devices that are no longer valid. The automatic deletion
of operations can be disabled. However, disabling this function is not recommended because these operations would then need
to be deleted manually.
If the LSP discovery option is enabled, creation of LSP discovery groups for newly discovered BGP next hop neighbors will
follow the same process as described in the "LSP Discovery Process" section. If a BGP next hop neighbor is removed from a
particular VPN, all the corresponding LSP discovery groups and their associated individual IP SLAs operations and statistics
are removed from the LSP discovery group database.
Access Lists for Filtering BGP Next Hop Neighbors
Standard IP access lists can be configured to restrict the number of IP SLAs operations that are automatically created by
the LSP Health Monitor. When the IP SLAs access list parameter is configured, the list of BGP next hop neighbors discovered
by the LSP Health Monitor is filtered based on the conditions defined by the associated standard IP access list. In other
words, the LSP Health Monitor will automatically create IP SLAs operations only for those BGP next hop neighbors with source
addresses that satisfy the criteria permitted by the standard IP access list.
Unique Identifier for Each Automatically Created IP SLAs Operation
The IP SLAs operations automatically created by the LSP Health Monitor are uniquely identified by their owner field. The
owner field of an operation is generated using all the parameters that can be configured for that particular operation. If
the length of the owner field is longer than 255 characters, it will be truncated.
Discovery of Neighboring PE Devices
A BGP next hop neighbor discovery process is used to find the BGP next hop neighbors in use by any VRF associated with the
source PE device. In most cases, these neighbors will be PE devices.
When the BGP next hop neighbor discovery process is enabled, a database of BGP next hop neighbors in use by any VRF associated
with the source PE device is generated based on information from the local VRF and global routing tables. As routing updates
are received, new BGP next hop neighbors are added to and deleted from the database immediately.
The figure below shows how the BGP next hop neighbor discovery process works for a simple VPN scenario for an Internet service
provider (ISP). In this example, there are three VPNs associated with device PE1: red, blue, and green. From the perspective
of device PE1, these VPNs are reachable remotely through BGP next hop neighbors PE2 (device ID: 12.12.12.12) and PE3 (device
ID: 13.13.13.13). When the BGP next hop neighbor discovery process is enabled on device PE1, a database is generated based
on the local VRF and global routing tables. The database in this example contains two BGP next hop device entries: PE2 12.12.12.12
and PE3 13.13.13.13. The routing entries are maintained per next hop device to distinguish which next hop devices belong within
which particular VRF. For each next hop device entry, the IPv4 Forward Equivalence Class (FEC) of the BGP next hop device
in the global routing table is provided so that it can be used by the MPLS LSP ping operation.
Figure 1. BGP Next Hop Neighbor Discovery for a Simple VPN
LSP Discovery
The LSP discovery option of an LSP Health Monitor operation provides the capability to discover the equal-cost multipaths
for carrying MPLS traffic between the source and destination PE devices. Network connectivity measurements can then be performed
for each of the paths that were discovered.
The general process for LSP discovery is as follows:
BGP next hop neighbors are discovered using the BGP next hop neighbor discovery process. For more information about the BGP
next hop neighbor discovery process, see the "Discovery of Neighboring PE Routers" section.
Once the LSP Health Monitor operation is started, a single IP SLAs operation is automatically created for each applicable
PE (BGP next hop) neighbor. Only a single path to each applicable PE neighbor is discovered during this initial step of the
LSP discovery process. For each next hop neighbor, the LSP Health Monitor creates an LSP discovery group (that initially consists
of only the one discovered path) and assigns the group with a unique identification number. For more information about LSP
discovery groups, see the "LSP Discovery Groups" section.
An LSP discovery request is sent by the LSP Health Monitor to the LSP discovery subsystem for each applicable BGP next hop
neighbor. For each next hop neighbor in which an appropriate response is received, MPLS echo requests are sent one-by-one
from the source PE device to discover the equal-cost multipaths. The parameters that uniquely identify each equal-cost multipath
(127/8 destination IP address [LSP selector] and the PE outgoing interface) are added to the associated LSP discovery database.
Note
For a given LSP Health Monitor operation, the user can define the maximum number of BGP next hop neighbors that can be concurrently
undergoing LSP discovery.
Each individual IP SLAs operation (created for each applicable PE neighbor) uses an IP SLAs LSP ping superoperation to measure
network connectivity across all equal-cost multipaths between the source PE device and discovered destination PE device. The
IP SLAs superoperation operates by sending an LSP ping packet to the destination PE device and adjusting the LSP ping 127/8
LSP selector IP address for each discovered equal-cost multipath. For example, assume that there are three equal-cost multipaths
to a destination PE device and the identified LSP selector IP addresses are 127.0.0.1, 127.0.0.5, and 127.0.0.6. The IP SLAs
superoperation would sequentially send three LSP ping packets using the identified LSP selector IP addresses for directing
the superoperation across the three paths. This technique ensures that there is only a single IP SLAs LSP ping operation for
each source and destination PE device pair, and significantly reduces the number of active LSP ping operations sent by the
source PE device.
The figure below illustrates a simple VPN scenario. This network consists of a core MPLS VPN with two PE devices (device
PE1 and device PE2) belonging to the VRF named VPN blue. Suppose device PE1 is the source PE device for an LSP Health Monitor
operation with the LSP discovery option enabled and that device PE2 is discovered by the BGP discovery process as a BGP next
hop neighbor to device PE1. If path 1 and path 2 are equal-cost multipaths between device PE1 to device PE2, then the LSP
discovery process would create an LSP discovery group consisting of path 1 and path 2. An IP SLAs LSP ping superoperation
would also be created to monitor network availability across each path.
Figure 2. LSP Discovery for a Simple VPN
LSP Discovery Groups
A single LSP Health Monitor operation can be comprised of several LSP discovery groups depending on the number of BGP next
hop neighbors discovered by the BGP next hop neighbor discovery process. Each LSP discovery group corresponds to one BGP next
hop neighbor and is assigned a unique identification number (starting with the number 1). The figure below illustrates a simple
VPN scenario. This network consists of a core MPLS VPN with three PE devices (device PE1, PE2, and PE3) belonging to the VRF
named VPN blue. Suppose device PE1 is the source PE device for an LSP Health Monitor operation with the LSP discovery option
enabled and that device PE2 and PE3 are discovered by the BGP discovery process as BGP next hop neighbors to device PE1. LSP
discovery group 1 is created for the equal-cost multipaths between device PE1 to device PE2 and LSP discovery group 2 is created
for the equal-cost multipaths between device PE1 to device PE3.
Figure 3. LSP Discovery Groups for a Simple VPN
Once the LSP Health Monitor operation is started, a single IP SLAs operation is automatically created for each applicable
PE (BGP next hop) neighbor. Each IP SLAs operation (created for each applicable PE neighbor) uses an IP SLAs LSP ping superoperation
to measure network connectivity across all equal-cost multipaths between the source PE device and discovered destination PE
device. Each LSP ping superoperation corresponds to a single LSP discovery group.
The LSP ping superoperation operates by sending an LSP ping packet to the destination PE device and adjusting the LSP ping
127/8 LSP selector IP address for each discovered equal-cost multipath. The network connectivity statistics collected by each
equal-cost multipath is aggregated and stored in one-hour increments (data can be collected for a maximum of two hours). Results
are stored as group averages representative of all the equal-cost multipaths within the LSP discovery group for a given one-hour
increment.
Each equal-cost multipath discovered between the source PE device and a BGP next hop neighbor is uniquely identified with
the following parameters:
127/8 destination IP address (LSP selector) within the local host IP address range
PE outgoing interface
The database for an LSP discovery group is updated if any of the following events occur:
The corresponding LSP ping superoperation sends an LSP ping packet.
An active equal-cost multipath is added to or deleted from the LSP discovery group.
The user enters the Cisco command to delete all the aggregated statistical data for a particular LSP discovery group.
IP SLAs LSP Ping and LSP Traceroute
The LSP Health Monitor feature introduces support for the IP SLAs LSP ping and IP SLAs LSP traceroute operations. These operations
are useful for troubleshooting network connectivity issues and determining network availability in an MPLS VPN. When using
the LSP Health Monitor, IP SLAs LSP ping and LSP traceroute operations are automatically created to measure network connectivity
between the source PE device and the discovered destination PE devices. Individual IP SLAs LSP ping and LSP traceroute operations
can also be manually configured. Manual configuration of these operations can be useful for troubleshooting a connectivity
issue.
The IP SLAs LSP ping and IP SLAs LSP traceroute operations are based on the same infrastructure used by the MPLS LSP Ping
and MPLS LSP Traceroute features, respectively, for sending and receiving echo reply and request packets to test LSPs.
The LSP discovery does not support IP SLAs traceroute operations.
Proactive Threshold Monitoring for the LSP Health Monitor
Proactive threshold monitoring support for the LSP Health Monitor feature provides the capability for triggering SNMP trap
notifications and syslog messages when user-defined reaction conditions (such as a connection loss or timeout) are met. Configuring
threshold monitoring for an LSP Health Monitor operation is similar to configuring threshold monitoring for a standard IP
SLAs operation.
LSP Discovery Option Enabled
If the LSP discovery option for an LSP Health Monitor operation is enabled, SNMP trap notifications can be generated when
one of the following events occurs:
LSP discovery for a particular BGP next hop neighbor fails.
Operational status of an LSP discovery group changes.
Possible reasons for which LSP discovery can fail for a particular BGP next hop neighbor are as follows:
Expiration of time allowed for a BGP next hop neighbor to respond to an LSP discovery request.
Return code is “Broken” or “Unexplorable” for all paths leading to the BGP next hop neighbor.
The table below describes the conditions for which the operational status of an LSP discovery group can change. Whenever
an individual IP SLAs LSP ping operation of an LSP discovery group is executed, a return code is generated. Depending on the
value of the return code and the current status of the LSP discovery group, the group status can change.
Table 1. Conditions for Which an LSP Discovery Group Status Changes
Individual IP SLAs Operation Return Code
Current Group Status = UP
Current Group Status = PARTIAL
Current Group Status = DOWN
OK
No group status change.
If return codes for all paths in the group are OK, then the group status changes to UP.
Group status changes to PARTIAL.
Broken or Unexplorable
Group status changes to PARTIAL.
If return codes for all paths in the group are Broken or Unexplorable, then the group status changes to DOWN.
No group status change.
The return code for an individual IP SLAs LSP ping operation can be one of the following:
OK--Indicates that the LSP is working properly. The customer VPN traffic will be sent across this path.
Broken--Indicates that the LSP is broken. Customer VPN traffic will not be sent across this path and may be discarded.
Unexplorable--Indicates that not all the paths to this PE neighbor have been discovered. This may be due to a disruption
along the LSP or because the number of 127/8 IP addresses used for LSP selection has been exhausted.
The status of an LSP discovery group can be one of the following:
UNKNOWN--Indicates that group status has not yet been determined and that the paths belonging to the group are in the process
of being tested for the first time. Once this initial test is complete, the group status will change to UP, PARTIAL, or DOWN.
UP--Indicates that all the paths within the group are active and no operation failures have been detected.
PARTIAL--Indicates that an operation failure has been detected for one or more, but not all, of the paths within the group.
DOWN--Indicates that an operation failure has been detected for all the paths within the group.
Secondary Frequency Option
With the introduction of the LSP Health Monitor feature, a new threshold monitoring parameter has been added that allows
you to specify a secondary frequency. If the secondary frequency option is configured and a failure (such as a connection
loss or timeout) is detected for a particular path, the frequency at which the path is remeasured will increase to the secondary
frequency value (testing at a faster rate). When the configured reaction condition is met (such as N consecutive connection
losses or N consecutive timeouts), an SNMP trap and syslog message can be sent and the measurement frequency will return to
its original frequency value.
Multioperation Scheduling for an LSP Health Monitor
Multioperation scheduling support for the LSP Health Monitor feature provides the capability to easily schedule the automatically
created IP SLAs operations (for a given LSP Health Monitor operation) to begin at intervals equally distributed over a specified
duration of time (schedule period) and to restart at a specified frequency. Multioperation scheduling is particularly useful
in cases where the LSP Health Monitor is enabled on a source PE device that has a large number of PE neighbors and, therefore,
a large number of IP SLAs operations running at the same time.
Newly created IP SLAs operations (for newly discovered BGP next hop neighbors) are added to the same schedule period as the
operations that are currently running. To prevent too many operations from starting at the same time, the multioperation scheduling
feature will schedule the operations to begin at random intervals uniformly distributed over the schedule period.
Configuring a multioperation schedule for an LSP Health Monitor is similar to configuring a standard multioperation schedule
for a group of individual IP SLAs operations.
LSP Discovery Enabled
When a multioperation schedule for an LSP Health Monitor operation with LSP discovery is started, the BGP next hop neighbors
are discovered, and network connectivity to each applicable neighbor is monitored using only a single LSP. Initially, network
connectivity between the source PE device and discovered destination PE device is measured across only a single path. This
initial condition is the same as if an LSP Health Monitor operation was performed without LSP discovery.
Specific information about the IP SLAs LSP ping operations that are created for newly discovered equal-cost paths during
the succeeding iterations of the LSP discovery process are stored in the LSP discovery group database. These newly created
IP SLAs LSP ping operations will start collecting data at the next iteration of network connectivity measurements for their
associated LSP discovery group.
The start times for the individual IP SLAs LSP ping operations for each LSP discovery group is based on the number of LSP
discovery groups and the schedule period of the multioperation schedule. For example, if three LSP discovery groups (Group
1, Group 2, and Group 3) are scheduled to run over a period of 60 seconds, the first LSP ping operation of Group 1 will start
at 0 seconds, the first LSP ping operation of Group 2 will start at 20 seconds, and the first LSP ping operation of Group
3 will start at 40 seconds. The remaining individual IP SLAs LSP ping operations for each LSP discovery group will run sequentially
after completion of the first LSP ping operation. For each LSP discovery group, only one LSP ping operation runs at a time.
How to Configure LSP Health Monitor Operations
Configuring an LSP Health Monitor Operation
Perform only one of the following tasks:
Configuring an LSP Health Monitor Operation without LSP Discovery on a PE Device
Note
If LSP discovery is disabled, only a single path between the source PE device and each BGP next hop neighbor is discovered.
SUMMARY STEPS
enable
configure terminal
mpls discovery vpn next-hop
mpls discovery vpn interval seconds
auto ip sla mpls-lsp-monitor operation-number
Do one of the following:
type echo [ipsla-vrf-all |
vrf vpn-name]
type pathEcho [ipsla-vrf-all |
vrf vpn-name]
access-list access-list-number
scan-interval minutes
delete-scan-factor factor
force-explicit-null
exp exp-bits
lsp-selector ip-address
reply-dscp-bits dscp-value
reply-mode {ipv4 |
router-alert }
request-data-size bytes
secondary-frequency {both |
connection-loss |
timeout }
frequency
tag text
threshold milliseconds
timeout milliseconds
ttl time-to-live
exit
auto ip sla mpls-lsp-monitor reaction-configuration operation-numberreact {connectionLoss |
timeout } [action-type option] [threshold-type {consecutive [occurrences] |
immediate |
never }]
exit
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Device> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Device# configure terminal
Enters global configuration mode.
Step 3
mpls discovery vpn next-hop
Example:
Device(config)# mpls discovery vpn next-hop
(Optional) Enables the MPLS VPN BGP next hop neighbor discovery process.
Note
This command is automatically enabled when the
auto ip sla mpls-lsp-monitor command is entered.
Step 4
mpls discovery vpn interval seconds
Example:
Device(config)# mpls discovery vpn interval 120
(Optional) Specifies the time interval at which routing entries that are no longer valid are removed from the BGP next hop
neighbor discovery database of an MPLS VPN.
Step 5
auto ip sla mpls-lsp-monitor operation-number
Example:
Device(config)# auto ip sla mpls-lsp-monitor 1
Begins configuration for an LSP Health Monitor operation and enters auto IP SLA MPLS configuration mode.
Note
Entering this command automatically enables the
mpls discovery vpn next-hop command.
Step 6
Do one of the following:
type echo [ipsla-vrf-all |
vrf vpn-name]
type pathEcho [ipsla-vrf-all |
vrf vpn-name]
Example:
Device(config-auto-ip-sla-mpls)# type echo ipsla-vrf-all
Example:
Device(config-auto-ip-sla-mpls)# type pathEcho ipsla-vrf-all
Enters MPLS parameters configuration submode and allows the user to configure the parameters for an IP SLAs LSP ping operation
using the LSP Health Monitor.
or
Enters MPLS parameters configuration submode and allows the user to configure the parameters for an IP SLAs LSP traceroute
operation using the LSP Health Monitor.
(Optional) Specifies the number of times the LSP Health Monitor should check the scan queue before automatically deleting
IP SLAs operations for BGP next hop neighbors that are no longer valid.
The default scan factor is 1. Each time the LSP Health Monitor checks the scan queue for updates, it deletes IP SLAs operations
for BGP next hop neighbors that are no longer valid.
If the scan factor is set to 0, IP SLAs operations will not be automatically deleted by the LSP Health Monitor. This configuration
is not recommended.
This command must be used with the
scan-interval command.
(Optional) Specifies the amount of time the IP SLAs operation waits for a response from its request packet.
Step 20
ttl time-to-live
Example:
Device(config-auto-ip-sla-mpls-params)# ttl 200
(Optional) Specifies the maximum hop count for an echo request packet of an IP SLAs operation.
Step 21
exit
Example:
Device(config-auto-ip-sla-mpls-params)# exit
Exits MPLS parameters configuration submode and returns to global configuration mode.
Step 22
auto ip sla mpls-lsp-monitor reaction-configuration operation-numberreact {connectionLoss |
timeout } [action-type option] [threshold-type {consecutive [occurrences] |
immediate |
never }]
Example:
Device(config)# auto ip sla mpls-lsp-monitor reaction-configuration 1 react connectionLoss action-type trapOnly threshold-type consecutive 3
(Optional) Configures certain actions to occur based on events under the control of the LSP Health Monitor.
Step 23
exit
Example:
Device(config)# exit
Exits global configuration mode and returns to privileged EXEC mode.
Configuring the LSP Health Monitor Operation with LSP Discovery on a PE Device
Note
The LSP Health Monitor with LSP Discovery feature supports Layer 3 MPLS VPNs only.
The LSP discovery option does not support IP SLAs LSP traceroute operations.
The LSP discovery option does not support IP SLAs VCCV operations.
The LSP discovery process can potentially have a significant impact on the memory and CPU of the source PE device. To prevent
unnecessary device performance issues, careful consideration should be taken when configuring the operational and scheduling
parameters of an LSP Health Monitor operation.
SUMMARY STEPS
enable
configure terminal
mpls discovery vpn next-hop
mpls discovery vpn interval seconds
auto ip sla mpls-lsp-monitor operation-number
type echo [ipsla-vrf-all |
vrf vpn-name]
Configure optional parameters for the IP SLAs LSP echo operation.
path-discover
hours-of-statistics-kept hours
force-explicit-null
interval milliseconds
lsp-selector-base ip-address
maximum-sessions number
scan-period minutes
session-timeout seconds
timeout seconds
exit
exit
auto ip sla mpls-lsp-monitor reaction-configuration operation-numberreact lpd {lpd-group [retry number] |
tree-trace } [action-type trapOnly ]
ip sla logging traps
exit
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Device> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Device# configure terminal
Enters global configuration mode.
Step 3
mpls discovery vpn next-hop
Example:
Device(config)# mpls discovery vpn next-hop
(Optional) Enables the MPLS VPN BGP next hop neighbor discovery process.
Note
This command is automatically enabled when the
auto ip sla mpls-lsp-monitor command is entered.
Step 4
mpls discovery vpn interval seconds
Example:
Device(config)# mpls discovery vpn interval 120
(Optional) Specifies the time interval at which routing entries that are no longer valid are removed from the BGP next hop
neighbor discovery database of an MPLS VPN.
Step 5
auto ip sla mpls-lsp-monitor operation-number
Example:
Device(config)# auto ip sla mpls-lsp-monitor 1
Begins configuration for an LSP Health Monitor operation and enters auto IP SLAs MPLS configuration mode.
Note
Entering this command automatically enables the
mpls discovery vpn next-hop command.
Step 6
type echo [ipsla-vrf-all |
vrf vpn-name]
Example:
Device(config-auto-ip-sla-mpls)# type echo ipsla-vrf-all
Enters MPLS parameters configuration mode and allows the user to configure the parameters for an IP SLAs LSP ping operation
using the LSP Health Monitor.
Step 7
Configure optional parameters for the IP SLAs LSP echo operation.
(Optional) See Steps 7 through 21 in the "Configuring an LSP Health Monitor Operation Without LSP Discovery on a PE Device"
section.
(Optional) Specifies the time interval between MPLS echo requests that are sent as part of the LSP discovery process for
an LSP Health Monitor operation.
(Optional) Specifies the maximum number of BGP next hop neighbors that can be concurrently undergoing LSP discovery for a
single LSP Health Monitor operation.
Note
Careful consideration should be used when configuring this parameter to avoid a negative impact on the device’s CPU.
(Optional) Sets the amount of time the LSP discovery process for an LSP Health Monitor operation waits for a response to
its LSP discovery request for a particular BGP next hop neighbor.
(Optional) Sets the amount of time the LSP discovery process for an LSP Health Monitor operation waits for a response to
its echo request packets.
Note
Careful consideration should be used when configuring this parameter to avoid a negative impact on the device’s CPU.
Step 17
exit
Example:
Device(config-auto-ip-sla-mpls-lpd-params)# exit
Exits LSP discovery parameters configuration submode and returns to MPLS parameters configuration mode.
Step 18
exit
Example:
Device(config-auto-ip-sla-mpls-params)# exit
Exits MPLS parameters configuration mode and returns to global configuration mode.
Step 19
auto ip sla mpls-lsp-monitor reaction-configuration operation-numberreact lpd {lpd-group [retry number] |
tree-trace } [action-type trapOnly ]
Example:
Device(config)# auto ip sla mpls-lsp-monitor reaction-configuration 1 react lpd lpd-group retry 3 action-type trapOnly
(Optional) Configures the proactive threshold monitoring parameters for an LSP Health Monitor operation with LSP discovery
enabled.
Step 20
ip sla logging traps
Example:
Device(config)# ip sla logging traps
(Optional) Enables the generation of SNMP system logging messages specific to IP SLAs trap notifications.
Step 21
exit
Example:
Device(config)# exit
Exits global configuration mode and returns to privileged EXEC mode.
Scheduling LSP Health Monitor Operations
Note
The LSP discovery process can potentially have a significant impact on the memory and CPU of the source PE device. Careful
consideration should be taken when configuring the scheduling parameters to prevent too many IP SLAs LSP ping operations from
running at the same time. The schedule period should be set to a relatively large value for large MPLS VPNs.
Newly created IP SLAs operations (for newly discovered BGP next hop neighbors) are added to the same mulioperation schedule
period as the operations that are currently running. To prevent too many operations from starting at the same time, the multioperation
scheduler will schedule the operations to begin at random intervals uniformly distributed over the schedule period.
Before you begin
All IP SLAs operations to be scheduled must be already configured.
SUMMARY STEPS
enable
configure terminal
auto ip sla mpls-lsp-monitor schedule operation-numberschedule-period seconds [frequency [seconds]] [start-time {after hh: mm: ss |
hh: mm[: ss] [monthday |
daymonth] |
now |
pending }]
exit
show ip sla configuration
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Device> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Device# configure terminal
Enters global configuration mode.
Step 3
auto ip sla mpls-lsp-monitor schedule operation-numberschedule-period seconds [frequency [seconds]] [start-time {after hh: mm: ss |
hh: mm[: ss] [monthday |
daymonth] |
now |
pending }]
Example:
Device(config)# auto ip sla mpls-lsp-monitor schedule 1 schedule-period 60 start-time now
Configures the scheduling parameters for an LSP Health Monitor operation.
Step 4
exit
Example:
Device(config)# exit
Exits to privileged EXEC mode.
Step 5
show ip sla configuration
Example:
Device# show ip sla configuration
(Optional) Displays the IP SLAs configuration details.
Troubleshooting Tips
Use the debug ip sla trace and debug ip sla error commands to help troubleshoot issues with an individual IP SLAs LSP ping or LSP traceroute operation. Use the debug ip sla mpls-lsp-monitor command to help troubleshoot issues with an IP SLAs LSP Health Monitor operation.
What to Do Next
To display the results of an individual IP SLAs operation use the show ip sla statistics and show ip sla statistics aggregated commands. Checking the output for fields that correspond to criteria in your service level agreement will help you determine
whether the service metrics are acceptable.
Manually Configuring and Scheduling an IP SLAs LSP Ping or LSP Traceroute Operation
The first example configures the IP SLAs operation as an LSP ping operation and enters LSP ping configuration mode.
The second example configures the IP SLAs operation as an LSP trace operation and enters LSP trace configuration mode.
Step 5
exp exp-bits
Example:
Device(config-sla-monitor-lspPing)# exp 5
(Optional) Specifies the experimental field value in the header for an echo request packet of an IP SLAs operation.
Note
The LSP ping configuration mode is used in this example and in the remaining steps. Except where noted, the same commands
are also supported in the LSP trace configuration mode.
(Optional) Configures certain actions to occur based on events under the control of IP SLAs.
Step 14
ip sla logging traps
Example:
Device(config)# ip sla logging traps
(Optional) Enables the generation of SNMP system logging messages specific to IP SLAs trap notifications.
Step 15
ip sla schedule operation-number [life {forever |
seconds}] [start-time {hh: mm[: ss] [monthday |
daymonth] |
pending |
now |
after hh: mm: ss}] [ageout seconds] [recurring ]
Example:
Device(config)# ip sla schedule 1 start-time now
Configures the scheduling parameters for an IP SLAs operation.
Step 16
exit
Example:
Device(config)# exit
Exits global configuration submode and returns to privileged EXEC mode.
Troubleshooting Tips
Use the debug ip sla trace and debug ip sla error commands to help troubleshoot issues with an individual IP SLAs LSP ping or LSP traceroute operation.
What to Do Next
To display the results of an individual IP SLAs operation use the show ip sla statistics and show ip sla statistics aggregated commands. Checking the output for fields that correspond to criteria in your service level agreement will help you determine
whether the service metrics are acceptable.
Verifying and Troubleshooting LSP Health Monitor Operations
SUMMARY STEPS
debug ip sla error [operation-number]
debug ip sla mpls-lsp-monitor [operation-number]
debug ip sla trace [operation-number]
show ip sla mpls-lsp-monitor collection-statistics [group-id]
show ip sla mpls-lsp-monitor configuration [operation-number]
show ip sla mpls-lsp-monitor lpd operational-state [group-id]
show ip sla mpls-lsp-monitor neighbors
show ip sla mpls-lsp-monitor scan-queue operation-number
show ip sla mpls-lsp-monitor summary [operation-number [group [group-id]]]
show ip sla statistics [operation-number] [details ]
show ip sla statistics aggregated [operation-number] [details ]
show mpls discovery vpn
DETAILED STEPS
Command or Action
Purpose
Step 1
debug ip sla error [operation-number]
Example:
Device# debug ip sla error
(Optional) Enables debugging output of IP SLAs operation run-time errors.
Step 2
debug ip sla mpls-lsp-monitor [operation-number]
Example:
Device# debug ip sla mpls-lsp-monitor
(Optional) Enables debugging output of LSP Health Monitor operations.
Step 3
debug ip sla trace [operation-number]
Example:
Device# debug ip sla trace
(Optional) Enables debugging output for tracing the execution of IP SLAs operations.
Step 4
show ip sla mpls-lsp-monitor collection-statistics [group-id]
Example:
Device# show ip sla mpls-lsp-monitor collection-statistics 100001
(Optional) Displays the statistics for IP SLAs operations belonging to an LSP discovery group of an LSP Health Monitor operation.
Note
This command is applicable only if the LSP discovery option is enabled.
Step 5
show ip sla mpls-lsp-monitor configuration [operation-number]
Example:
Device# show ip sla mpls-lsp-monitor configuration 1
(Optional) Displays configuration settings for LSP Health Monitor operations.
Step 6
show ip sla mpls-lsp-monitor lpd operational-state [group-id]
Example:
Device# show ip sla mpls-lsp-monitor lpd operational-state 100001
(Optional) Displays the operational status of the LSP discovery groups belonging to an LSP Health Monitor operation.
Note
This command is applicable only if the LSP discovery option is enabled.
Step 7
show ip sla mpls-lsp-monitor neighbors
Example:
Device# show ip sla mpls-lsp-monitor neighbors
(Optional) Displays routing and connectivity information about MPLS VPN BGP next hop neighbors discovered by the LSP Health
Monitor operation.
Step 8
show ip sla mpls-lsp-monitor scan-queue operation-number
Example:
Device# show ip sla mpls-lsp-monitor scan-queue 1
(Optional) Displays information about adding or deleting BGP next hop neighbors from a particular MPLS VPN of an LSP Health
Monitor operation.
Step 9
show ip sla mpls-lsp-monitor summary [operation-number [group [group-id]]]
Example:
Device# show ip sla mpls-lsp-monitor summary
(Optional) Displays BGP next hop neighbor and LSP discovery group information for LSP Health Monitor operations.
Note
This command is applicable only if the LSP discovery option is enabled.
Step 10
show ip sla statistics [operation-number] [details ]
Example:
Device# show ip sla statistics 100001
(Optional) Displays the current operational status and statistics of all IP SLAs operations or a specified operation.
Note
This command applies only to manually configured IP SLAs operations.
Step 11
show ip sla statistics aggregated [operation-number] [details ]
Example:
Device# show ip sla statistics aggregated 100001
(Optional) Displays the aggregated statistical errors and distribution information for all IP SLAs operations or a specified
operation.
Note
This command applies only to manually configured IP SLAs operations.
Step 12
show mpls discovery vpn
Example:
Device# show mpls discovery vpn
(Optional) Displays routing information relating to the MPLS VPN BGP next hop neighbor discovery process.
Configuration Examples for LSP Health Monitors
Example Configuring and Verifying the LSP Health Monitor Without LSP Discovery
The figure below illustrates a simple VPN scenario for an ISP. This network consists of a core MPLS VPN with four PE devices
belonging to three VPNs: red, blue, and green. From the perspective of device PE1, these VPNs are reachable remotely through
BGP next hop devices PE2 (device ID: 10.10.10.5), PE3 (device ID: 10.10.10.7), and PE4 (device ID: 10.10.10.8).
Figure 4. Network Used for LSP Health Monitor Example
The following example shows how to configure operation parameters, proactive threshold monitoring, and scheduling options
on PE1 (see the figure above) using the LSP Health Monitor. In this example, the LSP discovery option is enabled for LSP Health
Monitor operation 1. Operation 1 is configured to automatically create IP SLAs LSP ping operations for all BGP next hop neighbors
(PE2, PE3, and PE4) in use by all VRFs (red, blue, and green) associated with device PE1. The BGP next hop neighbor process
is enabled, and the time interval at which routing entries that are no longer valid are removed from the BGP next hop neighbor
discovery database is set to 60 seconds. The time interval at which the LSP Health Monitor checks the scan queue for BGP next
hop neighbor updates is set to 1 minute. The secondary frequency option is enabled for both connection loss and timeout events,
and the secondary frequency is set to 10 seconds. As specified by the proactive threshold monitoring configuration, when three
consecutive connection loss or timeout events occur, an SNMP trap notification is sent. Multioperation scheduling and the
generation of IP SLAs SNMP system logging messages are enabled.
PE1 Configuration
mpls discovery vpn interval 60
mpls discovery vpn next-hop
!
auto ip sla mpls-lsp-monitor 1
type echo ipsla-vrf-all
timeout 1000
scan-interval 1
secondary-frequency both 10
!
auto ip sla mpls-lsp-monitor reaction-configuration 1 react connectionLoss threshold-type consecutive 3 action-type trapOnly
auto ip sla mpls-lsp-monitor reaction-configuration 1 react timeout threshold-type consecutive 3 action-type trapOnly
ip sla traps
snmp-server enable traps rtr
!
auto ip sla mpls-lsp-monitor schedule 1 schedule-period 60 start-time now
The following is sample output from the
show ip sla mpls-lsp-monitor configuration command for PE1:
PE1# show ip sla mpls-lsp-monitor configuration 1
Entry Number : 1
Modification time : *12:18:21.830 PDT Fri Aug 19 2005
Operation Type : echo
Vrf Name : ipsla-vrf-all
Tag :
EXP Value : 0
Timeout(ms) : 1000
Threshold(ms) : 5000
Frequency(sec) : Equals schedule period
LSP Selector : 127.0.0.1
ScanInterval(min) : 1
Delete Scan Factor : 1
Operations List : 100001-100003
Schedule Period(sec): 60
Request size : 100
Start Time : Start Time already passed
SNMP RowStatus : Active
TTL value : 255
Reply Mode : ipv4
Reply Dscp Bits :
Secondary Frequency : Enabled on Timeout
Value(sec) : 10
Reaction Configs :
Reaction : connectionLoss
Threshold Type : Consecutive
Threshold Count : 3
Action Type : Trap Only
Reaction : timeout
Threshold Type : Consecutive
Threshold Count : 3
Action Type : Trap Only
The following is sample output from the
show mpls discovery vpn command for PE1:
PE1# show mpls discovery vpn
Refresh interval set to 60 seconds.
Next refresh in 46 seconds
Next hop 10.10.10.5 (Prefix: 10.10.10.5/32)
in use by: red, blue, green
Next hop 10.10.10.7 (Prefix: 10.10.10.7/32)
in use by: red, blue, green
Next hop 10.10.10.8 (Prefix: 10.10.10.8/32)
in use by: red, blue, green
The following is sample output from the
show ip sla mpls-lsp-monitor neighbors command for PE1:
PE1# show ip sla mpls-lsp-monitor neighbors
IP SLA MPLS LSP Monitor Database : 1
BGP Next hop 10.10.10.5 (Prefix: 10.10.10.5/32) OK
ProbeID: 100001 (red, blue, green)
BGP Next hop 10.10.10.7 (Prefix: 10.10.10.7/32) OK
ProbeID: 100002 (red, blue, green)
BGP Next hop 10.10.10.8 (Prefix: 10.10.10.8/32) OK
ProbeID: 100003 (red, blue, green)
The following is sample output from the
show ip sla mpls-lsp-monitor scan-queue 1 and
debug ip sla mpls-lsp-monitor commands when IP connectivity from PE1 to PE4 is lost. This output shows that connection loss to each of the VPNs associated
with PE4 (red, blue, and green) was detected and that this information was added to the LSP Health Monitor scan queue. Also,
since PE4 is no longer a valid BGP next hop neighbor, the IP SLAs operation for PE4 (Probe 10003) is being deleted.
PE1# show ip sla mpls-lsp-monitor scan-queue 1
Next scan Time after: 20 Secs
Next Delete scan Time after: 20 Secs
BGP Next hop Prefix vrf Add/Delete?
10.10.10.8 0.0.0.0/0 red Del(100003)
10.10.10.8 0.0.0.0/0 blue Del(100003)
10.10.10.8 0.0.0.0/0 green Del(100003)
PE1# debug ip sla mpls-lsp-monitor
IP SLAs MPLSLM debugging for all entries is on
*Aug 19 19:48: IP SLAs MPLSLM(1):Next hop 10.10.10.8 added in DeleteQ(1)
*Aug 19 19:49: IP SLAs MPLSLM(1):Removing vrf red from tree entry 10.10.10.8
*Aug 19 19:56: IP SLAs MPLSLM(1):Next hop 10.10.10.8 added in DeleteQ(1)
*Aug 19 19:56: IP SLAs MPLSLM(1):Next hop 10.10.10.8 added in DeleteQ(1)
*Aug 19 19:49: IP SLAs MPLSLM(1):Removing vrf blue from tree entry 10.10.10.8
*Aug 19 19:49: IP SLAs MPLSLM(1):Removing vrf green from tree entry 10.10.10.8
*Aug 19 19:49: IP SLAs MPLSLM(1):Removing Probe 100003
The following is sample output from the
show ip sla mpls-lsp-monitor scan-queue 1 and
debug ip sla mpls-lsp-monitor commands when IP connectivity from PE1 to PE4 is restored. This output shows that each of the VPNs associated with PE4 (red,
blue, and green) were discovered and that this information was added to the LSP Health Monitor scan queue. Also, since PE4
is a newly discovered BGP next hop neighbor, a new IP SLAs operation for PE4 (Probe 100005) is being created and added to
the LSP Health Monitor multioperation schedule. Even though PE4 belongs to three VPNs, only one IP SLAs operation is being
created.
PE1# show ip sla mpls-lsp-monitor scan-queue 1
Next scan Time after: 23 Secs
Next Delete scan Time after: 23 Secs
BGP Next hop Prefix vrf Add/Delete?
10.10.10.8 10.10.10.8/32 red Add
10.10.10.8 10.10.10.8/32 blue Add
10.10.10.8 10.10.10.8/32 green Add
PE1# debug ip sla mpls-lsp-monitor
IP SLAs MPLSLM debugging for all entries is on
*Aug 19 19:59: IP SLAs MPLSLM(1):Next hop 10.10.10.8 added in AddQ
*Aug 19 19:59: IP SLAs MPLSLM(1):Next hop 10.10.10.8 added in AddQ
*Aug 19 19:59: IP SLAs MPLSLM(1):Next hop 10.10.10.8 added in AddQ
*Aug 19 19:59: IP SLAs MPLSLM(1):Adding vrf red into tree entry 10.10.10.8
*Aug 19 19:59: IP SLAs MPLSLM(1):Adding Probe 100005
*Aug 19 19:59: IP SLAs MPLSLM(1):Adding ProbeID 100005 to tree entry 10.10.10.8 (1)
*Aug 19 19:59: IP SLAs MPLSLM(1):Adding vrf blue into tree entry 10.10.10.8
*Aug 19 19:59: IP SLAs MPLSLM(1):Duplicate in AddQ 10.10.10.8
*Aug 19 19:59: IP SLAs MPLSLM(1):Adding vrf green into tree entry 10.10.10.8
*Aug 19 19:59: IP SLAs MPLSLM(1):Duplicate in AddQ 10.10.10.8
*Aug 19 19:59: IP SLAs MPLSLM(1):Added Probe(s) 100005 will be scheduled after 26 secs over schedule period 60
Example Configuring and Verifying the LSP Health Monitor with LSP Discovery
The figure below illustrates a simple VPN scenario for an ISP. This network consists of a core MPLS VPN with two PE devices
belonging to a VPN named red. From the perspective of device PE1, there are three equal-cost multipaths available to reach
device PE2.
Figure 5. Network Used for LSP Health Monitor with LSP Discovery Example
The following example shows how to configure operation parameters, proactive threshold monitoring, and scheduling options
on PE1 (see the figure above) using the LSP Health Monitor. In this example, the LSP discovery option is enabled for LSP Health
Monitor operation 100. Operation 100 is configured to automatically create IP SLAs LSP ping operations for all equal-cost
multipaths between PE1 and PE2. The BGP next hop neighbor process is enabled, and the time interval at which routing entries
that are no longer valid are removed from the BGP next hop neighbor discovery database is set to 30 seconds. The time interval
at which the LSP Health Monitor checks the scan queue for BGP next hop neighbor updates is set to 1 minute. The secondary
frequency option is enabled for both connection loss and timeout events, and the secondary frequency is set to 5 seconds.
The explicit null label option for echo request packets is enabled. The LSP rediscovery time period is set to 3 minutes. As
specified by the proactive threshold monitoring configuration, an SNMP trap notification will be sent when an LSP discovery
group status changes occurs. Multioperation scheduling and the generation of IP SLAs SNMP system logging messages are enabled.
PE1 Configuration
mpls discovery vpn next-hop
mpls discovery vpn interval 30
!
auto ip sla mpls-lsp-monitor 100
type echo ipsla-vrf-all
scan-interval 1
secondary-frequency both 5
!
path-discover
force-explicit-null
scan-period 3
!
auto ip sla mpls-lsp-monitor reaction-configuration 100 react lpd-group retry 3 action-type trapOnly
!
auto ip sla mpls-lsp-monitor schedule 100 schedule-period 30 start-time now
!
ip sla logging traps
snmp-server enable traps rtr
The following is sample output from the
show ip sla mpls-lsp-monitor configuration command for PE1:
PE1# show ip sla mpls-lsp-monitor configuration
Entry Number : 100
Modification time : *21:50:16.411 GMT Tue Jun 20 2006
Operation Type : echo
Vrf Name : ipsla-vrf-all
Tag :
EXP Value : 0
Timeout(ms) : 5000
Threshold(ms) : 50
Frequency(sec) : Equals schedule period
ScanInterval(min) : 1
Delete Scan Factor : 1
Operations List : 100002
Schedule Period(sec): 30
Request size : 100
Start Time : Start Time already passed
SNMP RowStatus : Active
TTL value : 255
Reply Mode : ipv4
Reply Dscp Bits :
Path Discover : Enable
Maximum sessions : 1
Session Timeout(seconds) : 120
Base LSP Selector : 127.0.0.0
Echo Timeout(seconds) : 5
Send Interval(msec) : 0
Label Shimming Mode : force-explicit-null
Number of Stats Hours : 2
Scan Period(minutes) : 3
Secondary Frequency : Enabled on Connection Loss and Timeout
Value(sec) : 5
Reaction Configs :
Reaction : Lpd Group
Retry Number : 3
Action Type : Trap Only
The following is sample output from the
show mpls discovery vpn command for PE1:
PE1# show mpls discovery vpn
Refresh interval set to 30 seconds.
Next refresh in 4 seconds
Next hop 192.168.1.11 (Prefix: 192.168.1.11/32)
in use by: red
The following is sample output from the
show ip sla mpls-lsp-monitor neighbors command for PE1:
PE1# show ip sla mpls-lsp-monitor neighbors
IP SLA MPLS LSP Monitor Database : 100
BGP Next hop 192.168.1.11 (Prefix: 192.168.1.11/32) OK Paths: 3
ProbeID: 100001 (red)
The following is sample output from the
show ip sla mpls-lsp-monitor lpd operational-state command for LSP discovery group 100001:
PE1# show ip sla mpls-lsp-monitor lpd operational-state
Entry number: 100001
MPLSLM Entry Number: 100
Target FEC Type: LDP IPv4 prefix
Target Address: 192.168.1.11
Number of Statistic Hours Kept: 2
Last time LPD Stats were reset: *21:21:18.239 GMT Tue Jun 20 2006
Traps Type: 3
Latest Path Discovery Mode: rediscovery complete
Latest Path Discovery Start Time: *21:59:04.475 GMT Tue Jun 20 2006
Latest Path Discovery Return Code: OK
Latest Path Discovery Completion Time(ms): 3092
Number of Paths Discovered: 3
Path Information :
Path Outgoing Lsp Link Conn Adj Downstream
Index Interface Selector Type Id Addr Label Stack Status
1 Et0/0 127.0.0.8 90 0 10.10.18.30 21 OK
2 Et0/0 127.0.0.2 90 0 10.10.18.30 21 OK
3 Et0/0 127.0.0.1 90 0 10.10.18.30 21 OK
The following is sample output from the
show ip sla mpls-lsp-monitor collection-statistics command for LSP discovery group 100001:
PE1# show ip sla mpls-lsp-monitor collection-statistics
Entry number: 100001
Start Time Index: *21:52:59.795 GMT Tue Jun 20 2006
Path Discovery Start Time: *22:08:04.507 GMT Tue Jun 20 2006
Target Destination IP address: 192.168.1.11
Path Discovery Status: OK
Path Discovery Completion Time: 3052
Path Discovery Minimum Paths: 3
Path Discovery Maximum Paths: 3
LSP Group Index: 100002
LSP Group Status: up
Total Pass: 36
Total Timeout: 0 Total Fail: 0
Latest Probe Status: 'up,up,up'
Latest Path Identifier: '127.0.0.8-Et0/0-21,127.0.0.2-Et0/0-21,127.0.0.1-Et0/0-21'
Minimum RTT: 280 Maximum RTT: 324 Average RTT: 290
The following is sample output from the
show ip sla mpls-lsp-monitor summary command for LSP Health Monitor operation 100:
PE1# show ip sla mpls-lsp-monitor summary 100
Index - MPLS LSP Monitor probe index
Destination - Target IP address of the BGP next hop
Status - LPD group status
LPD Group ID - Unique index to identify the LPD group
Last Operation Time - Last time an operation was attempted by
a particular probe in the LPD Group
Index Destination Status LPD Group ID Last Operation Time
100 192.168.1.11 up 100001 *22:20:29.471 GMT Tue Jun 20 2006
The following is sample output from the
show ip sla mpls-lsp-monitor summary command for LSP discovery group 100001:
PE1#show ip sla mpls-lsp-monitor summary 100 group 100001
Group ID - unique number to identify a LPD group
Lsp-selector - Unique 127/8 address used to identify a LPD
Last Operation status - Latest probe status
Last RTT - Latest Round Trip Time
Last Operation Time - Time when the last operation was attempted
Group ID Lsp-Selector Status Failures Successes RTT Last Operation Time
100001 127.0.0.8 up 0 55 320 *22:20:29.471 GMT Tue Jun 20 2006
100001 127.0.0.2 up 0 55 376 *22:20:29.851 GMT Tue Jun 20 2006
100001 127.0.0.1 up 0 55 300 *22:20:30.531 GMT Tue Jun 20 2006
Example Manually Configuring an IP SLAs LSP Ping Operation
The following example shows how to manually configure and schedule an IP SLAs LSP ping operation:
ip sla 1
mpls lsp ping ipv4 192.168.1.4 255.255.255.255 lsp-selector 127.1.1.1
frequency 120
secondary-frequency timeout 30
!
ip sla reaction-configuration 1 react connectionLoss threshold-type consecutive 3 action-type trapOnly
ip sla reaction-configuration 1 react timeout threshold-type consecutive 3 action-type trapOnly
ip sla logging traps
!
ip sla schedule 1 start-time now life forever
Additional References
Related Documents
Related Topic
Document Title
MPLS LSP discovery management tool
"MPLS EM-MPLS LSP Multipath Tree Trace" chapter of the
Multiprotocol Label Switching Configuration Guide
Configuring standard IP access lists
"Access Control Lists" chapter of the
Security Configuration Guide: Securing the Data Plane guide
Multioperation scheduling for IP SLAs
"Configuring Multioperation Scheduling of IP SLAs Operations" chapter of the
Cisco IOS P SLAs Configuration Guide
Proactive threshold monitoring for IP SLAs
" Configuring Proactive Threshold Monitoring of IP SLAs Operations" chapter of the
Cisco IOS IP SLAs Configuration Guide
No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature.
--
Technical Assistance
Description
Link
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use
these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products
and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.
Feature Information for LSP
Health Monitor Operations
The following table provides release information about the feature or features described in this module. This table lists
only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco
Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 2. Feature Information for the
LSP Health Monitor
Feature
Name
Releases
Feature
Information
IP
SLAs--LSP Health Monitor
Cisco IOS XE Release 2.2
Cisco IOS XE 3.1.0SG
The IP SLAs
LSP Health Monitor feature provides the capability to proactively monitor Layer
3 MPLS VPNs.
IP
SLAs--LSP Health Monitor
For
software releases in which this feature was already introduced, new
command-line interface (CLI) was implemented that replaces the CLI introduced
in the earlier releases
Feedback