|
Command or Action |
Purpose |
Step 1 |
enable
Example:
|
Enables privileged EXEC mode.
-
Enter your password if prompted.
|
Step 2 |
configure terminal
Example:
Device# configure terminal
|
Enters global configuration mode. |
Step 3 |
ip sla operation-number
Example:
Device(config)# ip sla 10
|
Begins configuration for an IP SLAs operation and enters IP SLA configuration mode. |
Step 4 |
ftp get url [source-ip {ip-address | hostname}] [mode {passive | active}
Example:
Device(config-ip-sla)# ftp get ftp://username:password@hostip/filename
|
Defines an FTP operation and enters IP SLA FTP configuration mode. |
Step 5 |
history buckets-kept size
Example:
Device(config-ip-sla-ftp)# history buckets-kept 25
|
(Optional) Sets the number of history buckets that are kept during the lifetime of an IP SLAs operation. |
Step 6 |
history distributions-of-statistics-kept size
Example:
Device(config-ip-sla-ftp)# history distributions-of-statistics-kept 5
|
(Optional) Sets the number of statistics distributions kept per hop during an IP SLAs operation. |
Step 7 |
history enhanced [interval seconds] [buckets number-of-buckets]
Example:
Device(config-ip-sla-ftp)# history enhanced interval 900 buckets 100
|
(Optional) Enables enhanced history gathering for an IP SLAs operation. |
Step 8 |
history filter {none | all | overThreshold | failures}
Example:
Device(config-ip-sla-ftp)# history filter failures
|
(Optional) Defines the type of information kept in the history table for an IP SLAs operation. |
Step 9 |
frequency seconds
Example:
Device(config-ip-sla-ftp)# frequency 30
|
(Optional) Sets the rate at which a specified IP SLAs operation repeats. |
Step 10 |
history hours-of-statistics-kept hours
Example:
Device(config-ip-sla-ftp)# history hours-of-statistics-kept 4
|
(Optional) Sets the number of hours for which statistics are maintained for an IP SLAs operation. |
Step 11 |
history lives-kept lives
Example:
Device(config-ip-sla-ftp)# history lives-kept 5
|
(Optional) Sets the number of lives maintained in the history table for an IP SLAs operation. |
Step 12 |
owner owner-id
Example:
Device(config-ip-sla-ftp)# owner admin
|
(Optional) Configures the Simple Network Management Protocol (SNMP) owner of an IP SLAs operation. |
Step 13 |
history statistics-distribution-interval milliseconds
Example:
Device(config-ip-sla-ftp)# history statistics-distribution-interval 10
|
(Optional) Sets the time interval for each statistics distribution kept for an IP SLAs operation. |
Step 14 |
tag text
Example:
Device(config-ip-sla-ftp)# tag TelnetPollServer1
|
(Optional) Creates a user-specified identifier for an IP SLAs operation. |
Step 15 |
threshold milliseconds
Example:
Device(config-ip-sla-ftp)# threshold 10000
|
(Optional) Sets the upper threshold value for calculating network monitoring statistics created by an IP SLAs operation. |
Step 16 |
timeout milliseconds
Example:
Device(config-ip-sla-ftp)# timeout 10000
|
(Optional) Sets the amount of time an IP SLAs operation waits for a response from its request packet. |
Step 17 |
end
Example:
Device(config-ip-sla-ftp)# end
|
Exits to privileged EXEC mode. |