Cisco Express Forwarding: Command Changes |
12.2(25)S 12.2(28)SB 12.2(33)SRA 12.2(33)SXH 12.4(20)T |
In Cisco IOS Releases 12.2(25)S, 12.2(28)SB, 12.2(33)SRA and 12.2(33)SXH, Cisco Express Forwarding has been updated to support new features and new hardware. These updates enable Cisco Express Forwarding to operate with the Multiprotocol Label Switching (MPLS) High Availability (HA) applications and the MPLS Forwarding Infrastructure (MFI). This feature module details changes to commands that are required to support updates to Cisco Express Forwarding. In 12.2(25)S, this feature was introduced and supported on the Cisco 7500 series routers. In 12.2(28)SB, this feature was integrated into Cisco IOS Release 12.2(28)SB and implemented on the Cisco 10000 series routers. In 12.2(33)SRA, this feature was integrated into Cisco IOS Release 12.2(33)SRA. In 12.2(33)SXH, this feature was integrated into Cisco IOS Release 12.2(33)SXH. In 12.4(20)T, this feature was integrated into a Cisco IOS 12.4T release. The following commands were modified: cef table consistency-check, clear adjacency, clear cef linecard, clear cef table, clear ip cef inconsistency, debug adjacency, debug cef, debug ip cef, debug ip cef accounting non-recursive, debug ip cef fragmentation, debug ip cef hash, debug ip cef subblock, debug ip cef table, ip route-cache, monitor event-trace (EXEC), monitor event-trace (global), show adjacency, show cef, show cef features global, show cef interface, show ip cef, show ip cef adjacency, show ip cef non-recursive, show ip cef switching statistics, show ip cef tree, show ip cef unresolved, show ip traffic, show monitor event-trace, show xdr. |