- Finding Feature Information
- Prerequisites for Enabling or Disabling CEF or dCEF
- Restrictions for Enabling or Disabling CEF or dCEF
- Information About Enabling or Disabling CEF or dCEF
- How to Enable or Disable Central CEF or dCEF
- Configuration Examples for Central CEF or dCEF
- Additional References
- Feature Information for Enabling or Disabling CEF or dCEF
- Glossary
Enabling or Disabling CEF or dCEF
This module contains information about Cisco Express Forwarding and describes the required and optional tasks for enabling or disabling Cisco Express Forwarding and distributed Cisco Express Forwarding. Cisco Express Forwarding is an advanced Layer 3 IP switching technology. It optimizes network performance and scalability for all kinds of networks: those that carry small amounts of traffic and those that carry large amounts of traffic in complex patterns, such as the Internet and networks characterized by intensive web-based applications or interactive sessions.
- Finding Feature Information
- Prerequisites for Enabling or Disabling CEF or dCEF
- Restrictions for Enabling or Disabling CEF or dCEF
- Information About Enabling or Disabling CEF or dCEF
- How to Enable or Disable Central CEF or dCEF
- Configuration Examples for Central CEF or dCEF
- Additional References
- Feature Information for Enabling or Disabling CEF or dCEF
- Glossary
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Enabling or Disabling CEF or dCEF
Cisco Express Forwarding requires a software image that includes Cisco Express Forwarding and IP routing enabled on the switch or router.
Restrictions for Enabling or Disabling CEF or dCEF
- The Cisco ASR 1000 Series Aggregation Services Router operates only in distributed Cisco Express Forwarding mode.
- If you enable Cisco Express Forwarding and then create an access list that uses the logkeyword, the packets that match the access list are not Cisco Express Forwarding switched. They are process switched. Logging disables Cisco Express Forwarding.
Information About Enabling or Disabling CEF or dCEF
- Cisco Platform Support for Central CEF and dCEF
- When to Enable or Disable Central CEF on a Router
- When to Enable dCEF on a Line Card
- When to Enable or Disable CEF on an Interface
Cisco Platform Support for Central CEF and dCEF
Cisco Express Forwarding is enable by default on the Cisco ASR 1000 Series Aggregation Services Routers.
To find out if Cisco Express Forwarding is enabled on your platform, enter the show ip cefcommand. If Cisco Express Forwarding is enabled, you receive output that looks like this:
Router# show ip cef
Prefix Next Hop Interface
[...]
10.2.61.8/24 192.168.100.1 FastEthernet1/0/0
192.168.101.1 FastEthernet2/1/0
[...]
If Cisco Express Forwarding is not enabled on your platform, the output for the show ip cefcommand looks like this:
Router# show ip cef
%CEF not running
If Cisco Express Forwarding is not enabled on your platform, use the ip cefcommand to enable central Cisco Express Forwarding or the ip cef distributed command to enable distributed Cisco Express Forwarding.
When to Enable or Disable Central CEF on a Router
Enable central Cisco Express Forwarding operation when line cards are not available for Cisco Express Forwarding switching or when you need to use features not compatible with distributed Cisco Express Forwarding switching. When central Cisco Express Forwarding operation is enabled, the Cisco Express Forwarding Forwarding Information Base (FIB) and adjacency tables reside on the RP, and the RP performs express forwarding.
Disable central Cisco Express Forwarding on a router when you want to turn off central Cisco Express Forwarding on the router and on all interfaces on the router. You might want to do this if your router and router interfaces are configured with a feature that central Cisco Express Forwarding or distributed Cisco Express Forwarding does not support.
To disable central Cisco Express Forwarding on a router and on all interfaces on the router, use the no ip cef command.
When to Enable dCEF on a Line Card
Enable distributed Cisco Express Forwarding on a line card when you want the line card to perform express forwarding so that the RP can handle routing protocols or switch packets from legacy interface processors. When distributed Cisco Express Forwarding is enabled, line cards maintain an identical copy of the FIB and adjacency tables. The line cards perform express forwarding between port adapters, thus relieving the RP of involvement in the switching operation. distributed Cisco Express Forwarding uses an interprocess communication (IPC) mechanism to ensure synchronization of FIB tables and adjacency tables on the RP and line cards.
The Cisco ASR 1000 Series Routers operate only in distributed Cisco Express Forwarding mode. In other routers you can mix various types of line cards in the same router, and all of the line cards you are using need not support Cisco Express Forwarding. When a line card that does not support Cisco Express Forwarding receives a packet, the line card forwards the packet to the next higher switching layer (the RP) or forwards the packet to the next hop for processing. This structure allows legacy interface processors to exist in the router with newer interface processors.
Note |
When you enable distributed Cisco Express Forwarding globally, all interfaces that support distributed Cisco Express Forwarding are enabled by default. |
When to Enable or Disable CEF on an Interface
You need to decide whether or not you want Cisco Express Forwarding operation on an interface. In some instances, you might want to disable Cisco Express Forwarding or distributed Cisco Express Forwarding on a particular interface because that interface is configured with a feature that Cisco Express Forwarding or distributed Cisco Express Forwarding does not support. Because all interfaces that support Cisco Express Forwarding or distributed Cisco Express Forwarding are enabled by default when you enable Cisco Express Forwarding operation globally, you must use the no form of the ip route-cache cefcommand to turn off Cisco Express Forwarding operation on a particular interface. To reenable Cisco Express Forwarding, use the ip route-cache cef command. To reenable distributed Cisco Express Forwarding, use the ip route-cache distributed command.
Disabling Cisco Express Forwarding or distributed Cisco Express Forwarding on an interface disables Cisco Express Forwarding switching for packets forwarded to the interface, but has no effect on packets forwarded out of the interface.
When you disable Cisco Express Forwarding or distributed Cisco Express Forwarding, Cisco IOS XE software switches packets received on the interface using the next fastest switching path. For Cisco Express Forwarding, the next fastest switching path is switching on the RP. For distributed Cisco Express Forwarding, the next fastest switching path is Cisco Express Forwarding on the RP.
The input interface determines the Cisco IOS XE switching path that a packet takes. Consider the following when enabling or disabling switching methods on a particular interface:
- You need Cisco Express Forwarding to be enabled on the incoming interface for packets to be Cisco Express Forwarding switched.
- Because Cisco Express Forwarding makes the forwarding decision on input, you need to use the no ip route-cache cefcommand on the ingress interface if you want to disable Cisco Express Forwarding.
How to Enable or Disable Central CEF or dCEF
To enable or disable Cisco Express Forwarding or distributed Cisco Express Forwarding, perform either of the following tasks depending on whether you want to enable or disable Cisco Express Forwarding or distributed Cisco Express Forwarding on the router or to enable or disable Cisco Express Forwarding or distributed Cisco Express Forwarding on an interface:
Enabling or Disabling CEF or dCEF on a Router
Perform the following task to enable or disable Cisco Express Forwarding or distributed Cisco Express Forwarding operation on a router. Cisco Express Forwarding can optimize your network performance and scalability.
DETAILED STEPS
Enabling or Disabling CEF or dCEF on an Interface
Perform the following task to enable or disable Cisco Express Forwarding or distributed Cisco Express Forwarding operation on an interface. Cisco Express Forwarding can optimize your network performance and scalability.
DETAILED STEPS
Configuration Examples for Central CEF or dCEF
- Example Enabling or Disabling CEF or dCEF on a Router
- Example Enabling or Disabling Central CEF or dCEF on an Interface
Example Enabling or Disabling CEF or dCEF on a Router
You might want to disable distributed Cisco Express Forwarding if your router and router interfaces are configured with a feature that distributed Cisco Express Forwarding does not support. The following example shows how to disable distributed Cisco Express Forwarding on a router:
configure terminal !
no ip cef distributed
end
Example Enabling or Disabling Central CEF or dCEF on an Interface
All interfaces that support Cisco Express Forwarding operation (central Cisco Express Forwarding or distributed Cisco Express Forwarding) are enabled by default when you enable Cisco Express Forwarding operation globally. You might want to disable central Cisco Express Forwarding or distributed Cisco Express Forwarding on a particular interface if that interface is configured with a feature that central Cisco Express Forwarding or distributed Cisco Express Forwarding does not support.
The following example shows how to disable central Cisco Express Forwarding on a particular interface:
configure terminal ! interface ethernet 1/1/0 no ip route-cache cef end
The following example shows how to disable distributed Cisco Express Forwarding on FastEthernet interface 0/0/0:
configure terminal ! interface fe0/0/0 no ip route-cache cef end
The following example shows how to reenable distributed Cisco Express Forwarding operation on FastEthernet interface 0/0/0:
configure terminal ! ip cef distributed ! interface fe0/0/0 # ip route-cache cef end
The following example shows how to enable distributed Cisco Express Forwarding operation on the router (globally) and turn off Cisco Express Forwarding operation on FastEthernet interface 0/0/0:
configure terminal ! ip cef distributed interface fe0/0/0 no ip route-cache cef end
The following example shows how to reenable distributed Cisco Express Forwarding operation on FastEthernet interface 0/0/0:
configure terminal ! ip cef distributed ! interface fe0/0/0 ip route-cache cef end
Additional References
Related Documents
Related Topic |
Document Title |
---|---|
Cisco IOS commands |
|
Commands for configuring and managing Cisco Express Forwarding |
Cisco IOS IP Switching Command Reference |
Overview of the Cisco Express Forwarding feature |
Cisco Express Forwarding Overview |
Tasks for verifying Cisco Express Forwarding information on your router |
Configuring Basic Cisco Express Forwarding for Improved Performance, Scalability, and Resiliency in Dynamic Networks |
Tasks for configuring a load-balancing scheme for Cisco Express Forwarding |
Configuring a Load-Balancing Scheme for Cisco Express Forwarding Traffic |
Tasks for configuring Cisco Express Forwarding consistency checkers |
Configuring Cisco Express Forwarding Consistency Checkers for Route Processors and Line Cards |
Tasks for configuring epochs for Cisco Express Forwarding tables |
Configuring Epochs to Clear and Rebuild Cisco Express Forwarding and Adjacency Tables |
Tasks for configuring and verifying Cisco Express Forwarding network accounting |
Configuring Cisco Express Forwarding Network Accounting |
Tasks for customizing the display of Cisco Express Forwarding event trace messages |
Customizing the Display of Cisco Express Forwarding Event Trace Messages |
Standards
Standard |
Title |
---|---|
No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature. |
-- |
MIBs
MIB |
MIBs Link |
---|---|
No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature. |
To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator found at the following URL: |
RFCs
RFC |
Title |
---|---|
No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature. |
-- |
Technical Assistance
Description |
Link |
---|---|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information for Enabling or Disabling CEF or dCEF
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1 | Feature Information for Enabling or Disabling Cisco Express Forwarding or Distributed Cisco Express Forwarding |
Feature Name |
Releases |
Feature Configuration Information |
---|---|---|
This table is intentionally left blank because no features were introduced or modified in Cisco IOS XE Release 2.1or later. This table will be updated when feature information is added to this module. |
-- |
-- |
Glossary
adjacency --A relationship formed between selected neighboring routers and end nodes for the purpose of exchanging routing information. Adjacency is based upon the use of a common media segment by the routers and nodes involved.
Cisco Express Forwarding --A Layer 3 switching technology. Cisco Express Forwarding can also refer to central Cisco Express Forwarding mode, one of two modes of Cisco Express Forwarding operation. Cisco Express Forwarding enables a Route Processor to perform express forwarding. Distributed Cisco Express Forwarding is the other mode of Cisco Express Forwarding operation.
distributed Cisco Express Forwarding --A mode of Cisco Express Forwarding operation in which line cards maintain identical copies of the forwarding information base (FIB) and adjacency tables. The line cards perform the express forwarding between port adapters; this relieves the Route Processor of involvement in the switching operation.
FIB --forwarding information base. A component of Cisco Express Forwarding that is conceptually similar to a routing table or information base. The router uses the FIB lookup table to make destination-based switching decisions during Cisco Express Forwarding operation. The router maintains a mirror image of the forwarding information in an IP routing table.
GRE --generic routing encapsulation. A tunneling protocol developed by Cisco that enables encapsulation of a wide variety of protocol packet types inside IP tunnels. GRE creates a virtual point-to-point link to Cisco routers at remote points over an IP internetwork. By connecting multiprotocol subnetworks in a single-protocol backbone environment, IP tunneling using GRE allows the expansion of a network across a single-protocol backbone environment.
IPC --interprocess communication. The mechanism that enables the distribution of Cisco Express Forwarding tables from the Route Processor (RP) to the line card when the router is operating in distributed Cisco Express Forwarding mode.
label disposition --The removal of Multiprotocol Label Switching (MPLS) headers at the edge of a network. In MPLS label disposition, packets arrive on a router as MPLS packets and, with the header removed, are transmitted as IP packets.
label imposition --The action of putting a label on a packet.
LER --label edge router. A router that performs label imposition.
LFIB --Label Forwarding Information Base. The data structure used by switching functions to switch labeled packets.
LIB --Label information base. A database used by a label switch router (LSR) to store labels learned from other LSRs, as well as labels assigned by the local LSR.
line card --A general term for an interface processor that can be used in various Cisco products.
LSP --label switched path. A sequence of hops (Router 0...Router n). A packet travels from R0 to Rn by means of label switching mechanisms. An LSP can be chosen dynamically, based on normal routing mechanisms, or you can configure the LSP manually.
LSR --label switch router. A Layer 3 router that forwards a packet based on the value of a label encapsulated in the packet.
MPLS --Multiprotocol Label Switching. An emerging industry standard for the forwarding of packets along the normal routing paths (sometimes called MPLS hop-by-hop forwarding).
prefix --The network address portion of an IP address. A prefix is specified by a network and mask and is generally represented in the format network/mask. The mask indicates which bits are the network bits. For example, 1.0.0.0/16 means that the first 16 bits of the IP address are masked, making them the network bits. The remaining bits are the host bits. In this example, the network number is 10.0.
RIB --Routing Information Base. A central repository of routes that contains Layer 3 reachability information and destination IP addresses or prefixes. The RIB is also known as the routing table.
RP --Route Processor. The processor module in the router that contains the CPU, system software, and most of the memory components that are used in the router. It is sometimes called a supervisory processor.
VPN --Virtual Private Network. The result of a router configuration that enables IP traffic to use tunneling to travel securely over a public TCP/IP network.
VRF --A Virtual Private Network (VPN) routing/forwarding instance. A VRF consists of an IP routing table, a derived forwarding table, a set of interfaces that use the forwarding table, and a set of rules and routing protocols that determine what goes into the forwarding table. In general, a VRF includes the routing information that defines a customer VPN site that is attached to a PE router.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.