QoS: Policing and Shaping Configuration Guide, Cisco IOS XE 17 (Cisco ASR 900 Series)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 31, 2021

Chapter: Feature History

Feature History

Feature History

The following table lists the new and modified features that are supported in the QoS: Policing and Shaping Configuration Guide in Cisco IOS XE 17 releases.


Feature	Description
Cisco IOS XE Bengaluru 17.5.1
IP Address Range-Based Filtering Support for CoPP ACL	This feature supports Ingress on In-band Management Loopback interface and Ingress on Data plane interface to block traffic using MPLS. CoPP ACL also enables you to configure the 830 and 5432 ports on the Cisco router. Both, Source IP and Destination IP based filtering are supported on Cisco RSP3 module; however, only Source IP based filtering is supported on the Cisco RSP2 module.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)