SSL VPN

SSL VPN provides support in the Cisco IOS software for remote user access to enterprise networks from anywhere on the Internet. Remote access is provided through a Secure Socket Layer (SSL)-enabled SSL VPN gateway. The SSL VPN gateway allows remote users to establish a secure VPN tunnel. The XE SSL VPN Support feature provides a comprehensive solution that allows easy access to a broad range of web resources and web-enabled applications using native HTTP over SSL (HTTPS) browser support through the full-tunnel client support.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Prerequisites for SSL VPN

To securely access resources on a private network behind an SSL VPN gateway, the remote user of an SSL VPN service must have the following:

  • An account (login name and password).

  • Support for full tunnel mode using Cisco AnyConnect Client.

  • Operating system support. For more information, see the “AnyConnect Secure Mobility Client 3.1 Computer OSs Supported” section in the Supported VPN Platforms, Cisco ASA 5500 Series document.

  • Administrative privileges to install Cisco AnyConnect client.


Note

This feature is supported on the Cisco CSR 1000V Series Cloud Services Router only.

Restrictions for SSL VPN

  • ACL’s do not support DENY statements.

  • Using Cisco AnyConnect VPN, if you create tunnels at a high bring up rate, a failure may occur. When creating a large number of VPN SSL sessions (for example, 1000) use a bring up rate of 15 TPS or lower. If you use a higher TPS rate, a failure may occur.

Information About SSL VPN

SSL VPN Overview

Cisco IOS SSL VPN is a router-based solution offering Secure Sockets Layer (SSL) VPN remote-access connectivity integrated with industry-leading security and routing features on a converged data, voice, and wireless platform. The security is transparent to the end user and easy to administer. With Cisco IOS SSL VPN, end users gain access securely from home or any Internet-enabled location such as wireless hotspots. Cisco IOS SSL VPN also enables companies to extend corporate network access to offshore partners and consultants, keeping corporate data protected all the while. Cisco IOS SSL VPN in conjunction with the dynamically downloaded Cisco AnyConnect VPN Client provides remote users with full network access to virtually any corporate application.

SSL VPN delivers the following three modes of SSL VPN access, of which only tunnel mode is supported in Cisco IOS XE software:

  • Clientless—Clientless mode provides secure access to private web resources and will provide access to web content. This mode is useful for accessing most content that you would expect to access in a web browser, such as Internet access, databases, and online tools that employ a web interface.

  • Thin Client (port-forwarding Java applet)—Thin client mode extends the capability of the cryptographic functions of the web browser to enable remote access to TCP-based applications such as Post Office Protocol version 3 (POP3), Simple Mail Transfer Protocol (SMTP), Internet Message Access protocol (IMAP), Telnet, and Secure Shell (SSH).

  • Tunnel Mode—Full tunnel client mode offers extensive application support through its dynamically downloaded Cisco AnyConnect VPN Client (next-generation SSL VPN Client) for SSL VPN. Full tunnel client mode delivers a lightweight, centrally configured and easy-to-support SSL VPN tunneling client that provides network layer access to virtually any application.


Note

SSL VPN will not work if ip http secure-server is enabled.

Modes of Remote Access

Tunnel Mode

In a typical clientless remote access scenario, remote users establish an SSL tunnel to move data to and from the internal networks at the application layer (for example, web and e-mail). In tunnel mode, remote users use an SSL tunnel to move data at the network (IP) layer. Therefore, tunnel mode supports most IP-based applications. Tunnel mode supports many popular corporate applications (for example, Microsoft Outlook, Microsoft Exchange, Lotus Notes E-mail, and Telnet).

SSL VPN support provided by full tunnel mode is as follows:

  • Works like “clientless” IPsec VPN

  • Tunnel client loaded through Java or ActiveX

  • Application agnostic—supports all IP-based applications

  • Scalable

  • Local administrative permissions required for installation

Full tunnel client mode offers extensive application support through its dynamically downloaded Cisco AnyConnect VPN Client (next-generation SSL VPN Client) for SSL VPN. Full tunnel client mode delivers a lightweight, centrally configured and easy-to-support SSL VPN tunneling client that provides network layer access to virtually any application. The advantage of SSL VPN comes from its accessibility from almost any Internet-connected system without needing to install additional desktop software. Cisco SSL AnyConnect VPN allows remote users to access enterprise networks on the Internet through an SSL VPN gateway. During the establishment of the SSL VPN with the gateway, the Cisco AnyConnect VPN Client is downloaded and installed on the remote user equipment (laptop, mobile, PDA, etc. ), and the tunnel connection is established when the remote user logs into the SSL VPN gateway. The tunnel connection is determined by the group policy configuration. By default, the Cisco AnyConnect VPN Client is removed from the client PC after the connection is closed. However, you have the option to keep the Cisco AnyConnect VPN Client installed on the client equipment.

Cisco SSL AnyConnect VPN easy access to services within the company’s network and simplifies the VPN configuration on the SSL VPN gateway, reducing the overhead for system administrators.

SSL VPN CLI Constructs

SSL Proposal

SSL proposal specifies the cipher suites that are supported. Each cipher suite defines a key exchange algorithm, a bulk encryption algorithm, a MAC algorithm. One of the cipher suites configured would be chosen from the client's proposal during SSL negotiation. If the intersection between the client proposed suites and configured suites is a null set, the negotiation terminates. Ciphers are currently selected based on the client's priority.

The SSL proposal is used in SSL handshake protocol for negotiating encryption and decryption. The default SSL proposal is used with SSL policy in the absence of any user-defined proposal. The default proposal has ciphers in the order as show below: 
protection rsa-aes256-sha1 rsa-aes128-sha1 rsa-3des-ede-sha1 rsa-3des-ede-sha1

SSL Policy

SSL policy defines the cipher suites to be supported and the trust point to be used during SSL negotiation. SSL policy is a container of all the parameters used in the SSL negotiation. The policy selection would be done by matching the session parameters against the parameters configured under the policy. There is no default policy. Every policy is associated with a proposal and a trustpoint.

SSL Profile

The SSL VPN profile defines authentication and accounting lists. Profile selection depends on policy and URL values. Profile may, optionally, be associated with a default authorization policy.

The following rules apply:

  • The policy and URL must be unique for an SSL VPN profile.

  • At least one authorization method must be specified to bring up the session.

  • The three authorization types namely user, group and cached may coexist.

  • There is no default authorization.

  • The order of precedence for authorization is user authorization, cache authorization, and group authorization. If group authorization override is configured the order of precedence is group authorization, user authorization, and cache authorization.

SSL Authorization Policy

The SSL authorization policy is a container of authorization parameters that are pushed to the remote client and are applied either locally on the virtual-access interface or globally on the device. The authorization policy is referred from the SSL VPN profile.

SSL VPN MIB

The SSL VPN MIB represents the Cisco implementation-specific attributes of a Cisco entity that implements SSL VPN. The MIB provides operational information in Cisco’s SSL VPN implementation by managing the SSLVPN, trap control, and notification groups. For example, the SSL VPN MIB provides the number of active SSL tunnels on the device.

How to Configure SSL VPN

Configuring SSL Proposal

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. crypto ssl proposal proposal-name
  4. protection
  5. end
  6. show crypto ssl proposal [proposal name]

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

crypto ssl proposal proposal-name

Example:

Device(config)# crypto ssl proposal proposal1

Defines an SSL proposal name, and enters crypto SSL proposal configuration mode.

Step 4

protection

Example:

Device(config-crypto-ssl-proposal)# protection rsa-3des-ede-sha1 rsa-aes128-sha1

Specifies one or more cipher suites that are as follows:

  • rsa-3des-ede-sha1

  • rsa-aes128-sha1

  • rsa-aes256-sha1

  • rsa-rc4128-md5

Step 5

end

Example:

Device(config-crypto-ssl-proposal)# end

Exits SSL proposal configuration mode and returns to privileged EXEC mode.

Step 6

show crypto ssl proposal [proposal name]

Example:

Device# show crypto ssl proposal

(Optional) Displays the SSL proposal.

What to do next

After configuring the SSL proposal, configure the SSL policy. For more information, see the “Configuring SSL Policy” section.

Note

SSL VPN will not work if ip http secure-server is enabled.

Configuring SSL Policy

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. crypto ssl policy policy-name
  4. ip address local ip-address [vrf vrf-name] [port port-number] [standby redundancy-name]
  5. ip interface local interface-name [vrf vrf-name] [port port-number] [standby redundancy-name]
  6. pki trustpoint trustpoint-name sign
  7. ssl proposal proposal-name
  8. no shut
  9. end
  10. show crypto ssl policy [policy-name]

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

crypto ssl policy policy-name

Example:

Device(config)# crypto ssl policy policy1

Defines an SSL policy name and enters SSL policy configuration mode.

Step 4

ip address local ip-address [vrf vrf-name] [port port-number] [standby redundancy-name]

Example:

Device(config-crypto-ssl-policy)# ip address local 10.0.0.1 port 446

Specifies the local IP address to start the TCP listener.

Note 
Either this command or the ip interface local command is mandatory.
Step 5

ip interface local interface-name [vrf vrf-name] [port port-number] [standby redundancy-name]

Example:

Device(config-crypto-ssl-policy)# ip interface local FastEthernet redundancy1

Specifies the local interface to start the TCP listener.

Note 
Either this command or the ip address local command is mandatory.
Step 6

pki trustpoint trustpoint-name sign

Example:

Device(config-crypto-ssl-policy)# pki trustpoint tp1 sign

(Optional) Specifies the trustpoint to be used to send server certificate during an SSL handshake.

Note 
If this command is not specified, a default self-signed trustpoint is used. If there is no default self-signed trustpoint, the system creates a default self-signed certificate.
Step 7

ssl proposal proposal-name

Example:

Device(config-crypto-ssl-policy)# ssl proposal pr1

(Optional) Specifies the cipher suites to be selected during an SSL handshake.

Note 
If a proposal is not specified, the default proposal is used.
Step 8

no shut

Example:

Device(config-crypto-ssl-policy)# no shut

Starts the TCP listener based on the configuration.

Step 9

end

Example:

Device(config-crypto-ssl-policy)# end

Exits SSL policy configuration mode and returns to privileged EXEC mode.

Step 10

show crypto ssl policy [policy-name]

Example:

Device# show crypto ssl policy

(Optional) Displays the SSL policies.

What to do next

After configuring the SSL policy, configure the SSL profile to match the policy. For more information, see the “Configuring SSL Profile” section.

Configuring an SSL Profile

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. crypto ssl profile profile-name
  4. aaa accounting list list-name
  5. aaa authentication list list-name
  6. aaa authorization group [override ] list aaa-listname aaa-username
  7. aaa authorization user {cached | list aaa-listname aaa-username}
  8. match policy policy-name
  9. match url url-name
  10. no shut
  11. end
  12. show crypto ssl profile [profile-name]

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

crypto ssl profile profile-name

Example:

Device(config)# crypto ssl profile profile1

Defines an SSL profile and enters SSL profile configuration mode.

Step 4

aaa accounting list list-name

Example:

Device(config-crypto-ssl-profile)# aaa accounting list list1

Specifies authentication, authorization, and accounting (AAA) accounting method list.

Step 5

aaa authentication list list-name

Example:

Device(config-crypto-ssl-profile)# aaa authentication list list2

Specifies the AAA authentication method list.

Step 6

aaa authorization group [override ] list aaa-listname aaa-username

Example:

Device(config-crypto-ssl-profile)# aaa authorization group override list list1 user1

Specifies the AAA method list and username for group authorization.

  • group —Specifies group authorization.

  • override —(Optional) Specifies that attributes from group authorization should take precedence while merging attributes. By default, user attributes take precedence.

  • aaa-listname —AAA method list name.

  • aaa-username —Username that must be used in the AAA authorization request. Refers to SSL authorization policy name defined on the device.

Step 7

aaa authorization user {cached | list aaa-listname aaa-username}

Example:

Device(config-crypto-ssl-profile)# aaa authorization user list list1 user1

Specifies the AAA method list and username for user authorization.

  • user —Specifies user authorization.

  • cached —Specifies that the attributes received during EAP authentication or obtained from the AAA preshared key must be cached.

  • aaa-listname —AAA method list name.

  • aaa-username —Specifies the username that must be used in the AAA authorization request.

Step 8

match policy policy-name

Example:

Device(config-crypto-ssl-profile)# match address policy policy1

Uses match statements to select an SSL profile for a peer based on the SSL policy name.

Step 9

match url url-name

Example:

Device(config-crypto-ssl-profile)# match url www.abc.com

Uses match statements to select an SSL profile for a peer based on the URL.

Step 10

no shut

Example:

Device(config-crypto-ssl-profile)# no shut
Specifies the profile cannot be shut until the policy specified in the match policy command is in use.
Step 11

end

Example:

Device(config-crypto-ssl-profile)# end
Exits SSL profile configuration mode and returns to privileged EXEC mode.
Step 12

show crypto ssl profile [profile-name]

Example:

Device# show crypto ssl profile

(Optional) Displays the SSL profile.

Configuring the SSL Authorization Policy

Perform this task to configure the SSL authorization policy.

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. crypto ssl authorization policy policy-name
  4. banner banner-text
  5. client profile profile-name
  6. def-domain domain-name
  7. Do one of the following:
    • dns primary-server [secondary-server]
    • ipv6 dns primary-server [secondary-server]
  8. dpd-interval {client | server } interval
  9. homepage homepage-text
  10. include-local-lan
  11. ipv6 prefix prefix
  12. keepalive seconds
  13. module module-name
  14. msie-proxy exception exception-name
  15. msie-proxy option {auto | bypass | none }
  16. msie-proxy server {ip-address | dns-name}
  17. mtu bytes
  18. netmask mask
  19. Do one of the following:
    • pool name
    • ipv6 pool name
  20. rekey time seconds
  21. Do one of the following:
    • route set access-list acl-name
    • ipv6 route set access-list access-list-name
  22. smartcard-removal-disconnect
  23. split-dns string
  24. timeout {disconnect seconds | idle seconds | session seconds}
  25. wins primary-server [secondary-server]
  26. end
  27. show crypto ssl authorization policy [policy-name]

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:

Device# configure terminal

Enters global configuration mode.

Step 3

crypto ssl authorization policy policy-name

Example:

Device(config)# crypto ssl authorization policy policy1

Specifies the SSL authorization policy and enters SSL authorization policy configuration mode.

Step 4

banner banner-text

Example:

Device(config-crypto-ssl-auth-policy)# banner This is SSL VPN tunnel. NOTE: DO NOT dial emergency response numbers (e.g. 911,112) from
software telephony clients. Your exact location and the appropriate emergency response agency may not be easily identified.

Specifies the banner. The banner is displayed on successful tunnel set up.

Step 5

client profile profile-name

Example:

Device(config-crypto-ssl-auth-policy)# client profile profile1

Specifies the client profile. The profile must already be specified using the crypto ssl profile command.

Step 6

def-domain domain-name

Example:

Device(config-crypto-ssl-auth-policy)# def-domain example.com

Specifies the default domain. This parameter specifies the default domain that the client can use.

Step 7

Do one of the following:

  • dns primary-server [secondary-server]
  • ipv6 dns primary-server [secondary-server]

Example:

Device(config-crypto-ssl-auth-policy)# dns 198.51.100.1 198.51.100.100

Example:

Device(config-crypto-ssl-auth-policy)# ipv6 dns 2001:DB8:1::1 2001:DB8:2::2

Specifies an IPv4-or IPv6-based address for the primary and secondary Domain Name Service (DNS) servers.

  • primary-server —IP address of the primary DNS server.

  • secondary-server —(Optional) IP address of the secondary DNS server.

Step 8

dpd-interval {client | server } interval

Example:

Device(config-crypto-ssl-auth-policy)# dpd-interval client 1000

Configures Dead Peer Detection (DPD).globally for the client or server.

  • client —DPD for the client mode. The default value is 300 (five minutes).

  • server —DPD for the server mode. The default value is 300.

  • interval —Interval, in seconds. The range is from 5 to 3600.

Step 9

homepage homepage-text

Example:

Device(config-crypto-ssl-auth-policy)# homepage http://www.abc.com

Specifies the SSL VPN home page URL.

Step 10

include-local-lan

Example:

Device(config-crypto-ssl-auth-policy)# include-local-lan

Permits the remote user to access resources on a local LAN, such as a network printer.

Step 11

ipv6 prefix prefix

Example:

Device(config-crypto-ssl-auth-policy)# ipv6 prefix 64

Defines the IPv6 prefix for IPv6 addresses.

  • prefix —Prefix length. The range is from 1 to 128.

Step 12

keepalive seconds

Example:

Device(config-crypto-ssl-auth-policy)# keepalive 500

Enables setting the minimum, maximum, and default values for keepalive, in seconds.

Step 13

module module-name

Example:

Device(config-crypto-ssl-auth-policy)# module gina

Enables the server gateway to download the appropriate module for VPN to connect to a specific group.

  • dart —Downloads the AnyConnect Diagnostic and Reporting Tool (DART) module.

  • gina —Downloads the Start Before Logon (SBL) module.

Step 14

msie-proxy exception exception-name

Example:

Device(config-crypto-ssl-auth-policy)# msie-proxy exception 198.51.100.2

The DNS name or the IP address specified in the exception-name argument that must not be sent via the proxy.

Step 15

msie-proxy option {auto | bypass | none }

Example:

Device(config-crypto-ssl-auth-policy)# msie-proxy option bypass

Specifies the proxy settings for the Microsoft Internet Explorer browser. The proxy settings are required to specify an internal proxy server and to route the browser traffic through the proxy server when connecting to the corporate network.

  • auto —Browser is configured to auto detect proxy server settings.

  • bypass —Local addresses bypass the proxy server.

  • none —Browser is configured to not use the proxy server.

Step 16

msie-proxy server {ip-address | dns-name}

Example:

Device(config-crypto-ssl-auth-policy)# msie-proxy server 198.51.100.2

The IP address or the DNS name, optionally followed by the port number, of the proxy server.

Note 

This command is required if the msie-proxy option bypass command is specified.

Step 17

mtu bytes

Example:

Device(config-crypto-ssl-auth-policy)# mtu 1000

(Optional) Enables setting the minimum, maximum, and default MTU value.

Note 

The value specified in this command overrides the default MTU specified in Cisco AnyConnect Secure client configuration. If not specified, the value specified Cisco AnyConnect Secure client configuration is the MTU value. If the calculated MTU is less than the MTU specified in this command, this command is ignored.

Step 18

netmask mask

Example:

Device(config-crypto-ssl-auth-policy)# netmask 255.255.255.0

Specifies the netmask of the subnet from which the IP address is assigned to the client.

  • mask —Subnet mask address.

Step 19

Do one of the following:

  • pool name
  • ipv6 pool name

Example:

Device(config-crypto-ssl-auth-policy)# pool abc

Example:

Device(config-crypto-ssl-auth-policy)# ipv6 pool ipv6pool

Defines a local IPv4 or IPv6 address pool for assigning IP addresses to the remote access client.

  • name —Name of the local IP address pool.

Note 
The local IP address pool must already be defined using the ip local pool command.
Step 20

rekey time seconds

Example:

Device(config-crypto-ssl-auth-policy)# rekey time 1110

Specifies the rekey interval, in seconds. The default value is 3600.

Step 21

Do one of the following:

  • route set access-list acl-name
  • ipv6 route set access-list access-list-name

Example:

Device(config-crypto-ssl-auth-policy)# route set access-list acl1

Example:

Device(config-crypto-ssl-auth-policy)# ipv6 route set access-list acl1

Establishes IPv4 or IPv6 routes via the access list that must be secured through tunnels.

  • acl-name —Access list name.

Step 22

smartcard-removal-disconnect

Example:

Device(config-crypto-ssl-auth-policy)# smartcard-removal-disconnect

Enables smartcard removal disconnect and specifies that the client should terminate the session when the smart card is removed.

Step 23

split-dns string

Example:

Device(config-crypto-ssl-auth-policy)# split-dns example.com example.net

Allows you to specify up to ten split domain names, which the client should use for private networks.

Step 24

timeout {disconnect seconds | idle seconds | session seconds}

Example:

Device(config-crypto-ssl-auth-policy)# timeout disconnect 10000

Specifies the timeout, in seconds.

  • disconnect seconds —Specifies the retry duration, in seconds, for Cisco AnyConnect client to reconnect to the server gateway. The default value is 0.

  • idle seconds —Specifies the idle timeout, in seconds. The default value is 1800 (30 minutes).

  • session seconds —Specifies the session timeout, in seconds. The default value is 43200 (12 hours).

Step 25

wins primary-server [secondary-server]

Example:

Device(config-crypto-ssl-auth-policy)# wins 203.0.113.1 203.0.113.115

Specifies the internal Windows Internet Naming Service (WINS) server addresses.

  • primary-server —IP address of the primary WINS server.

  • secondary-server —(Optional) IP address of the secondary WINS server.

Step 26

end

Example:

Device(config-crypto-ssl-auth-policy)# end

Exits SSL authorization policy configuration mode and returns to privileged EXEC mode.

Step 27

show crypto ssl authorization policy [policy-name]

Example:

Device(config-crypto-ssl-auth-policy)# show crypto ssl authorization policy

(Optional) Displays the SSL authorization policy.

Verifying SSL VPN Configurations

This section describes how to use show commands to verify the SSL VPN configurations:

SUMMARY STEPS

  1. enable
  2. show crypto ssl proposal [name]
  3. show crypto ssl policy [name]
  4. show crypto ssl profile [name]
  5. show crypto ssl authorization policy [name]
  6. show crypto ssl session {user user-name | profile profile-name}
  7. show crypto ssl stats [profile profile-name] [tunnel ] [detail ]
  8. clear crypto ssl session {profile profile-name| user user-name}

DETAILED STEPS

Step 1

enable

Example:

Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

show crypto ssl proposal [name]

Example:

Device# show crypto ssl proposal
 
SSL Proposal: sslprop
    Protection: 3DES-SHA1

Displays the SSL proposal.

Step 3

show crypto ssl policy [name]

Example:

Device# show crypto ssl policy 
 
 SSL Policy: sslpolicy
  Status     : ACTIVE
  Proposal   : sslprop
  IP Address : 10.78.106.23
  Port       : 443
  fvrf       : 0
  Trust Point: TP-self-signed-1183786860
  Redundancy : none

Displays the SSL policies.

Step 4

show crypto ssl profile [name]

Example:

Device# show crypto ssl profile 
 
SSL Profile: sslprofile
 Status: ACTIVE
 Match Criteria:
   URL: none
   Policy: 
    sslpolicy
 AAA accounting List      : local
 AAA authentication List  :none
 AAA authorization cached  :true     
 AAA authorization user List   :default
 AAA authorization user name: sslauth
 AAA authorization group List   :none
 AAA authorization group name: none
 Authentication Mode      : user credentials
 Interface                : SSLVPN-VIF1
   Status: ENABLE

Displays the SSL profile.

Step 5

show crypto ssl authorization policy [name]

Example:

Device# show crypto ssl authorization policy 
 
SSL Auth Policy: sslauth
 V4 Parameter:
   Address Pool: SVC_POOL
   Netmask: 255.255.255.0
   Route ACL : split-include
 Banner                  : none
 Home Page               : none
 Idle timeout            : 300
 Disconnect Timeout      : 0
 Session Timeout         : 43200
 Keepalive Interval      : 0
 DPD Interval            : 300
 Rekey 
   Interval: 0
   Method  : none
 Split DNS               : none
 Default domain          : none
 Proxy Settings
     Server: none
     Option: NULL
     Exception(s): none
 Anyconnect Profile Name : 
 SBL Enabled             : NO
 MAX MTU                 : 1406
 Smart Card
 Removal Disconnect      : NO

Displays the SSL authorization policy.

Step 6

show crypto ssl session {user user-name | profile profile-name}

Example:

Device# show crypto ssl session user LAB

Session Type      : Full Tunnel
Client User-Agent : AnyConnect Windows 3.0.08057

Username          : LAB                  Num Connection : 1
Public IP         : 72.163.209.245
Profile           : sslprofile              Policy Group   : sslauth
Last-Used         : 00:00:02           Created        : *00:58:44.219 PDT Thu Jul 25 2013
Session Timeout   : 43200           Idle Timeout   : 300
DPD GW Timeout    : 300           DPD CL Timeout : 300
Address Pool      : sslvpn-pool     MTU Size       : 1406
Rekey Time        : 0                     Rekey Method   :
Lease Duration    : 43200
Tunnel IP         : 50.1.1.2             Netmask        : 255.255.255.0
Rx IP Packets     : 0                     Tx IP Packets  : 125
CSTP Started      : 00:01:12        Last-Received  : 00:00:02
CSTP DPD-Req sent : 0             Virtual Access : 0
Msie-ProxyServer  : None          Msie-PxyPolicy : Disabled
Msie-Exception    :
Client Ports      : 34552

Device# show crypto ssl session profile sslprofile

SSL profile name: sslprofile
Client_Login_Name  Client_IP_Address  No_of_Connections  Created  Last_Used
LAB                72.163.209.245             1         00:00:33  00:00:00
Error receiving show session info from remote cores

Displays SSL VPN session information.

Step 7

show crypto ssl stats [profile profile-name] [tunnel ] [detail ]

Example:

Device# show crypto ssl stats

SSLVPN Global statistics:
    Active connections       : 0          AAA pending reqs         : 0
    Peak connections         : 1          Peak time                : 1w6d
    Authentication failures  : 21
    VPN session timeout      : 1          VPN idle timeout         : 0
    User cleared VPN sessions: 0          Login Denined            : 0
    Connect succeed          : 1          Connect failed           : 0
    Reconnect succeed        : 0          Reconnect failed         : 0
    IP Addr Alloc Failed     : 0          VA creation failed       : 0
    Route Insertion Failed   : 0
    IPV6 Addr Alloc Failed   : 0
    IPV6 Route Insert Failed : 0
    IPV6 Hash Insert Failed  : 0
    IPV6 STC Alloc Failed    : 0
    in  CSTP control         : 5          out CSTP control         : 3
    in  CSTP data            : 21         out CSTP data            : 8

Device# show crypto ssl stats tunnel profile prf1
SSLVPN Profile name : prf1
Tunnel Statistics:
    Active connections       : 0
    Peak connections         : 0          Peak time                : never
    Connect succeed          : 0          Connect failed           : 0
    Reconnect succeed        : 0          Reconnect failed         : 0
    DPD timeout              : 0
  Client
    in  CSTP frames          : 0          in  CSTP control         : 0
    in  CSTP data            : 0          in  CSTP bytes           : 0
    out CSTP frames          : 0          out CSTP control         : 0
    out CSTP data            : 0          out CSTP bytes           : 0
    cef in  CSTP data frames : 0          cef in  CSTP data bytes  : 0
    cef out CSTP data frames : 0          cef out CSTP data bytes  : 0
  Server
    In  IP pkts              : 0          In  IP bytes             : 0
    Out IP pkts              : 0          Out IP bytes             : 0

Displays SSL VPN statistics.

Step 8

clear crypto ssl session {profile profile-name| user user-name}

Example:

Device# clear crypto ssl session sslprofile

Clears SSL VPN session.

Configuration Examples for SSL VPN

Example: Specifying the AnyConnect Image and Profile

The following example shows how to specify the Cisco AnyConnect image and profile. 

Device> enable
Device# configure terminal
Device(config)# crypto vpn anyconnect bootflash:/webvpn/anyconnect-win-3.1.04072-k9.pkg sequence 1
Device(config)# crypto vpn anyconnect profile Employee bootflash:/Employee.xml
Device(config)# end

Example: Configuring SSL Proposal

The following example shows how to configure the SSL proposal. 

Device> enable
Device# configure terminal
Device(config)# crypto ssl proposal proposal1
Device(config-crypto-ssl-proposal)# protection rsa-3des-ede-sha1 rsa-aes128-sha1
Device(config-crypto-ssl-proposal)# end

Example: Configuring SSL Policy

The following example shows how to configure an SSL policy. 

Device> enable
Device# configure terminal
Device(config)# crypto ssl policy policy1
Device(config-crypto-ssl-policy)# ip address local 10.0.0.1 port 443
Device(config-crypto-ssl-policy)# pki trustpoint tp1 sign
Device(config-crypto-ssl-policy)# ssl proposal proposal1
Device(config-crypto-ssl-policy)# no shut
Device(config-crypto-ssl-policy)# end

Example: Configuring SSL Profile

The following example shows how to configure an SSL profile. 

Device> enable
Device# configure terminal
Device(config)# crypto ssl profile profile1
Device(config-crypto-ssl-profile)# aaa accounting list list1
Device(config-crypto-ssl-profile)# aaa authentication list list2
Device(config-crypto-ssl-profile)# aaa authorization group override list list1 user1
Device(config-crypto-ssl-profile)# aaa authorization user list list1 user1
Device(config-crypto-ssl-profile)# match address policy policy1
Device(config-crypto-ssl-profile)# match url www.abc.com
Device(config-crypto-ssl-profile)# no shut
Device(config-crypto-ssl-profile)# end

Example: Configuring SSL Authorization Policy

The following example shows how to configure an SSL authorization policy. 

Device> enable
Device# configure terminal
Device(config)# crypto ssl authorization policy policy1
Device(config-crypto-ssl-auth-policy)# banner This is SSL VPN tunnel.
Device(config-crypto-ssl-auth-policy)# client profile profile1
Device(config-crypto-ssl-auth-policy)# def-domain cisco
Device(config-crypto-ssl-auth-policy)# dns 198.51.100.1 198.51.100.100
Device(config-crypto-ssl-auth-policy)# dpd client 1000
Device(config-crypto-ssl-auth-policy)# homepage http://www.abc.com
Device(config-crypto-ssl-auth-policy)# include-local-lan
Device(config-crypto-ssl-auth-policy)# keepalive 500
Device(config-crypto-ssl-auth-policy)# module gina
Device(config-crypto-ssl-auth-policy)# msie-proxy exception 198.51.100.2
Device(config-crypto-ssl-auth-policy)# msie-proxy option bypass
Device(config-crypto-ssl-auth-policy)# msie-proxy server 198.51.100.2
Device(config-crypto-ssl-auth-policy)# mtu 1000
Device(config-crypto-ssl-auth-policy)# netmask 255.255.255.0
Device(config-crypto-ssl-auth-policy)# pool abc
Device(config-crypto-ssl-auth-policy)# rekey interval 1110
Device(config-crypto-ssl-auth-policy)# route set access-list acl1
Device(config-crypto-ssl-auth-policy)# smartcard-removal-disconnect
Device(config-crypto-ssl-auth-policy)# split-dns abc1
Device(config-crypto-ssl-auth-policy)# timeout disconnect 10000
Device(config-crypto-ssl-auth-policy)# wins 203.0.113.1 203.0.113.115
Device(config-crypto-ssl-auth-policy)# end

The following example shows how to enable IPv6 support for SSL VPN. 

Device> enable
Device# configure terminal
Device(config)# crypto ssl authorization policy policy1
Device(config-crypto-ssl-auth-policy)# banner This is SSL VPN tunnel.
Device(config-crypto-ssl-auth-policy)# client profile profile1
Device(config-crypto-ssl-auth-policy)# def-domain cisco
Device(config-crypto-ssl-auth-policy)# ipv6 dns 2001:DB8:1::1 2001:DB8:2::2
Device(config-crypto-ssl-auth-policy)# dpd client 1000
Device(config-crypto-ssl-auth-policy)# homepage http://www.abc.com
Device(config-crypto-ssl-auth-policy)# include-local-lan
Device(config-crypto-ssl-auth-policy)# ipv6 prefix 64
Device(config-crypto-ssl-auth-policy)# ipv6 route set access-list acl1
Device(config-crypto-ssl-auth-policy)# keepalive 500
Device(config-crypto-ssl-auth-policy)# module gina
Device(config-crypto-ssl-auth-policy)# msie-proxy exception 198.51.100.2
Device(config-crypto-ssl-auth-policy)# msie-proxy option bypass
Device(config-crypto-ssl-auth-policy)# msie-proxy server 198.51.100.2
Device(config-crypto-ssl-auth-policy)# mtu 1000
Device(config-crypto-ssl-auth-policy)# ipv6 pool ipv6pool
Device(config-crypto-ssl-auth-policy)# rekey interval 1110
Device(config-crypto-ssl-auth-policy)# route set access-list acl1
Device(config-crypto-ssl-auth-policy)# smartcard-removal-disconnect
Device(config-crypto-ssl-auth-policy)# split-dns abc1
Device(config-crypto-ssl-auth-policy)# timeout disconnect 10000
Device(config-crypto-ssl-auth-policy)# wins 203.0.113.1 203.0.113.115
Device(config-crypto-ssl-auth-policy)# end

Additional References for SSL VPN

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Command List, All Releases

Security commands

Recommended cryptographic algorithms

Next Generation Encryption

Technical Assistance

Description

Link

The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for SSL VPN

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for SSL VPN

Feature Name

Release

Feature Information

XE SSL VPN Support

Cisco IOS XE Release 3.12S

SSL VPN provides support in the Cisco IOS software for remote user access to enterprise networks from anywhere on the Internet. Remote access is provided through a Secure Socket Layer (SSL)-enabled SSL VPN gateway. The SSL VPN gateway allows remote users to establish a secure VPN tunnel. The XE SSL VPN Support feature provides a comprehensive solution that allows easy access to a broad range of web resources and web-enabled applications using native HTTP over SSL (HTTPS) browser support through the full-tunnel client support.

In Cisco IOS XE Release 3.12.1S, this feature supported Cisco CSR 1000V Series Cloud Services Router.

The following commands were introduced by this feature: aaa accounting list , aaa authentication list , aaa authorization , banner , client profile , crypto ssl authorization policy , crypto ssl policy , crypto ssl profile , crypto ssl proposal , def-domain , dns , dpd , homepage , include-local-lan , ip address local , ip interface local , keepalive , match policy , match url , module , msie-proxy , mtu , netmask , pki trustpoint , pool , protection , rekey interval , route set access-list , show crypto ssl authorization policy , show crypto ssl policy , show crypto ssl profile , show crypto ssl proposal , shut , smartcard-removal-disconnect , split-dns , ssl proposal , timeout , wins .

SSL VPN MIB

Cisco IOS XE Release 3.15S

The SSL VPN MIB represents the Cisco implementation-specific attributes of a Cisco entity that implements SSL VPN. The MIB provides operational information in Cisco’s SSL VPN implementation by managing the SSLVPN, trap control, and notification groups. For example, the SSL VPN MIB provides the number of active SSL tunnels on the device.