- Configuring Authentication
- AAA Double Authentication Secured by Absolute Timeout
- Login Password Retry Lockout
- Throttling of AAA RADIUS Records
- MSCHAP Version 2
- Define Interface Policy-Map AV Pairs AAA
- RADIUS Packet of Disconnect
- Configuring MAC Authentication Bypass
- AAA Authorization and Authentication Cache
- Configuring Authorization
- Configuring Accounting
- AAA Broadcast Accounting-Mandatory Response Support
- AAA Dead-Server Detection
- AAA-SERVER-MIB Set Operation
- Per VRF AAA
RADIUS Packet of Disconnect
The RADIUS Packet of Disconnect feature is used to terminate a connected voice call.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for RADIUS Packet of Disconnect
- Configure AAA as described in Cisco IOS Security Configuration Guide: Securing User Services , Release 15.0(1)M.
- Use Cisco IOS Release 12.2(11)T or later.
Restrictions for RADIUS Packet of Disconnect
Proper matching identification information must be communicated by the following:
- Billing server and gateway configuration
- Gateway's original accounting start request
- Server's POD request
Information About RADIUS Packet of Disconnect
The Packet of Disconnect (POD) is a RADIUS access_request packet and is intended to be used in situations where the authenticating agent server wants to disconnect the user after the session has been accepted by the RADIUS access_accept packet.
When the POD is Needed
The POD may be needed in at least two situations:
- Detection of fraudulent use, which cannot be performed before accepting the call. A price structure so complex that the maximum session duration cannot be estimated before accepting the call. This may be the case when certain types of discounts are applied or when multiple users use the same subscription simultaneously.
- To prevent unauthorized servers from disconnecting users, the authorizing agent that issues the POD packet must include three parameters in its packet of disconnect request. For a call to be disconnected, all parameters must match their expected values at the gateway. If the parameters do not match, the gateway discards the packet of disconnect packet and sends a NACK (negative acknowledgement message) to the agent.
POD Parameters
The POD has the following parameters:
- An h323-conf-id vendor-specific attribute (VSA) with the same content as received from the gateway for this call.
- An h323-call-origin VSA with the same content as received from the gateway for the leg of interest.
- A 16-byte MD5 hash value that is carried in the authentication field of the POD request.
- Cisco allocated POD code 50 as the new code value for the Voice POD Request in Cisco IOS Release 12.2(27)SB and 12.4(15)T. This change was made because RFC 3576 Dynamic Authorization Extensions to RADIUS recently extended RADIUS standards to officially support both a Disconnect Message (DM) and Change-of-Authorization (CoA), which is supported through the POD.
RFC 3576 specifies the following POD codes:
How to Configure the RADIUS Packet of Disconnect
Configuring the RADIUS POD
Use the following tasks to configure the RADIUS POD:
DETAILED STEPS
Troubleshooting Tips
Use the following tips to troubleshoot POD issues:
- Ensure that the POD port is configured correctly in both the gateway (using aaa pod servercommand) and the radius server. Both should be the same.
- Ensure that the shared-secret key configured in the gateway (using aaa pod servercommand) and in the AAA server are the same.
- Turn on debug aaa pod command to see what's going on. This will let you know if the gateway receives the POD packet from the server and if so, it will display any errors encountered.
The following example shows output from a successful POD request, when using the show debug command.
Router# debug aaa podAAA POD packet processing debugging is on Router# show debugGeneral OS: AAA POD packet processing debugging is on Router# Apr 25 17:15:59.318:POD:172.19.139.206 request queued Apr 25 17:15:59.318:voice_pod_request: Apr 25 17:15:59.318:voip_populate_pod_attr_list: Apr 25 17:15:59.318:voip_pod_get_guid: Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val: Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val:attr_len=50 Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val:attr=h323-conf-id Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val:attr_len=50 value_len=35 Apr 25 17:15:59.318:voip_pod_get_guid:conf-id=FFA7785F F7F607BB 00000000 993FB1F4 n_bytes=35 Apr 25 17:15:59.318:voip_pod_get_guid:GUID = FFA7785F F7F607BB 00000000 993FB1F4 Apr 25 17:15:59.318:voip_populate_pod_attr_list: Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val: Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val:attr_len=23 Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val:attr=h323-originate Apr 25 17:15:59.318:voip_pod_get_vsa_attr_val:attr_len=23 value_len=6 Apr 25 17:15:59.318:voip_get_call_direction: Apr 25 17:15:59.318:voip_get_call_direction:returning answer Apr 25 17:15:59.318:voip_eval_pod_attr: Apr 25 17:15:59.318:cc_api_trigger_disconnect: Apr 25 17:15:59.322:POD:Sending ACK to 172.19.139.206/1700 Apr 25 17:15:59.322:voip_pod_clean:
Additional References
The following sections provide references related to the RADIUS Packet of Disconnect feature.
Related Documents
| Related Topic |
Document Title |
|---|---|
| AAA |
Cisco IOS Security Configuration Guide: Securing User Services, Release 15.0(1)M |
| Security commands |
Cisco IOS Security Command Reference |
| CLI Configuration |
Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.4T |
| Configuring AAA for voice gateways |
Configuring AAA for Cisco Voice Gateways, Release 12.4T |
Standards
| Standard |
Title |
|---|---|
| No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature. |
-- |
MIBs
| MIB |
MIBs Link |
|---|---|
| No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature. |
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: |
RFCs
| RFC |
Title |
|---|---|
| RFC 2865 |
Remote Authentication Dial-in User Service |
| RFC 3576 |
Dynamic Authorization Extensions to RADIUS |
Technical Assistance
| Description |
Link |
|---|---|
| The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for RADIUS Packet of Disconnect
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Table 1 | Feature Information for RADIUS Packet of Disconnect |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| RADIUS Packet of Disconnect |
12.2(2)XB 12.1(2)XH 12.3(11)T 12.2(27)SB 12.4(15)T |
The RADIUS Packet of Disconnect feature is used to terminate a connected voice call. In Cisco IOS Release12.2(2)XB, this feature was introduced on the Cisco 3600, Cisco 5350, and Cisco 5400. In Cisco IOS Release 12.1(2)XH and 12.1(3)T, this feature was introduced on the Cisco 5300 and Cisco 5800. In Cisco IOS Release 12.2(11)T, this feature was introduced on the Cisco 5400, Cisco 5850 In Cisco IOS Release 12.2(27)SB and 12.4(15)T, Cisco allocated POD code 50 as the new code value for the voice POD request The following commands were introduced or modified: aaa pod server and debug aaa pod |
Glossary
AAA --authentication, authorization, and accounting.
NACK --negative acknowledgement message.
POD --packet of disconnect. An access_reject packet sent from a RADIUS server to the gateway in order to disconnect a call which has been connected already. After validation of the packet, the gateway disconnects the user. The packet contains the information to disconnect the call.
POD server--a Cisco gateway configured to accept and process POD requests from a RADIUS authentication/authorization agent.
RADIUS --Remote Authentication Dial-In User Service. An authentication and accounting system used by many Internet service providers.
UDP --User Datagram Protocol. Connectionless transport layer protocol in the TCP/IP protocol stack. UDP is a simple protocol that exchanges datagrams without acknowledgments or guaranteed delivery, requiring that error processing and retransmission be handled by other protocols. UDP is defined in RFC 768.
VoIP-- voice over IP. The ability to carry normal telephony-style voice over an IP-based Internet with POTS-like functionality, reliability, and voice quality. VoIP is a blanket term that generally refers to the Cisco standards-based (for example, H.323) approach to IP voice traffic.
VSA --vendor-specific attribute.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Feedback