- Configuring RADIUS
- Framed-Route in RADIUS Accounting
- RFC-2867 RADIUS Tunnel Accounting
- RADIUS Centralized Filter Management
- RADIUS Debug Enhancements
- RADIUS Logical Line ID
- RADIUS Route Download
- RADIUS Server Load Balancing
- RADIUS Support of 56-Bit Acct Session-Id
- RADIUS Tunnel Preference for Load Balancing and Fail-Over
- RADIUS Server Reorder on Failure
RADIUS Route Download
The RADIUS Route Download feature allows users to configure their network access server (NAS) to direct RADIUS authorization. Users configure a separate named method list (in addition to the default method list) for static route download requests sent by their NAS to authorization, authentication, and accounting (AAA) servers.
Before this feature, RADIUS authorization for static route download requests was sent only to AAA servers specified by the default method list.
This feature extends the functionality of the aaa route download command to allow users to specify the name of the method list that will be used to direct static route download requests to the AAA servers. The aaa route downloadcommandmay be used to specify a separate method list for downloading static routes. This method list can be added by using the aaa authorization configuration command.
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for RADIUS Route Download
AAA network security must be enabled before you perform the tasks in this feature.
How to Configure RADIUS Route Download
Configuring RADIUS Route Download
To configure the NAS to send static route download requests to the servers specified by a named method list, use the following commands in global configuration mode:
DETAILED STEPS
| Command or Action | Purpose | |
|---|---|---|
|
|
|
Downloads static route configuration information from the AAA server using RADIUS. |
|
|
|
Enables the static route download feature. Use the authorization method-list attributes to specify a named method list to which RADIUS authorization requests for static route downloads are sent. |
Verifying RADIUS Route Download
To verify the routes that are installed, use the show ip route command in EXEC mode.
To display information that is associated with RADIUS, use the debug radius command in privileged EXEC mode.
Configuration Examples for RADIUS Route Download
RADIUS Route Download Configuration Example
The following example shows how to configure the NAS to send static route download requests to the servers specified by the method list named “list1”:
aaa new-model aaa group server radius rad1 server 10.2.2.2 auth-port 1645 acct-port 1646 ! aaa group server tacacs+ tac1 server 172.17.3.3 ! aaa authorization configuration default group radius aaa authorization configuration list1 group rad1 group tac1 aaa route download 1 authorization list1 tacacs-server host 172.17.3.3 tacacs-server key cisco tacacs-server administration ! radius-server host 10.2.2.2 auth-port 1645 acct-port 1646 radius-server key cisco
Additional References
The following sections provide references related to RADIUS Route Download.
Related Documents
| Related Topic |
Document Title |
|---|---|
| Configuring Large-Scale Dial-Out |
Cisco IOS Dial Technologies Command Reference |
| Cisco IOS Dial Technologies |
Standards
| Standard |
Title |
|---|---|
| None |
-- |
MIBs
| MIB |
MIBs Link |
|---|---|
| None |
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: |
RFCs
| RFC |
Title |
|---|---|
| None |
-- |
Technical Assistance
| Description |
Link |
|---|---|
| The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for RADIUS Route Download
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Table 1 | Feature Information for RADIUS Route Download |
| Feature Name |
Releases |
Feature Information |
|---|---|---|
| RADIUS Route Download |
12.2(8)T 12.2(28)SB 12.2(33)SRC |
The RADIUS Route Download feature allows users to configure their network access server (NAS) to direct RADIUS authorization. Users configure a separate named method list (in addition to the default method list) for static route download requests sent by their NAS to authorization, authentication, and accounting (AAA) servers. The aaa route download command was introduced by this feature. |
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
Feedback