- RADIUS Attributes Overview and RADIUS IETF Attributes
- RADIUS Vendor-Proprietary Attributes
- RADIUS Vendor-Specific Attributes and RADIUS Disconnect-Cause Attribute Values
- Connect-Info RADIUS Attribute 77
- Encrypted Vendor-Specific Attributes
- RADIUS Attribute 5 NAS-Port Format Specified on a Per-Server Group Level
- RADIUS Attribute 8 Framed-IP-Address in Access Requests
- RADIUS Attribute 82 Tunnel Assignment ID
- RADIUS Attribute 104
- RADIUS Tunnel Attribute Extensions
- V.92 Reporting Using RADIUS Attribute v.92-info
- RADIUS Attribute 66 Tunnel-Client-Endpoint Enhancements
- RADIUS Attribute Screening
- RADIUS NAS-IP-Address Attribute Configurability
- AAA Per VC QoS Policy Support
Contents
- V.92 Reporting Using RADIUS Attribute v.92-info
- Finding Feature Information
- Prerequisites for V.92 Reporting Using RADIUS Attribute v.92-info
- Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info
- Information About V.92 Reporting Using RADIUS Attribute v.92-info
- V.92 Standard Overview
- VSA v.92-info
- How to Monitor and Verify V.92 Call Information
- Monitoring V.92 Call Information
- Verifying V.92 Call Information
- Troubleshooting Tips
- Additional References
- Related Documents
- Standards
- MIBs
- RFCs
- Technical Assistance
- Feature Information for V.92 Reporting Using RADIUS Attribute v.92-info
V.92 Reporting Using RADIUS Attribute v.92-info
The V.92 Reporting Using RADIUS Attribute v.92-info feature provides the ability to track V.92 call information, such as V.92 features that are supported, the Quick Connect feature set that was attempted, the duration for which the original call was put on hold, and how many times Modem On Hold was initiated. The vendor-specific attribute (VSA) v.92-info is included in accounting “start” and “stop” records when modems negotiate a V.92 connection.
- Finding Feature Information
- Prerequisites for V.92 Reporting Using RADIUS Attribute v.92-info
- Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info
- Information About V.92 Reporting Using RADIUS Attribute v.92-info
- How to Monitor and Verify V.92 Call Information
- Additional References
- Feature Information for V.92 Reporting Using RADIUS Attribute v.92-info
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for V.92 Reporting Using RADIUS Attribute v.92-info
Before the network access server (NAS) can send attribute v.92-info information in accounting “start” and “stop” records, you must perform the following tasks:
Configure your NAS for authentication, authorization, and accounting (AAA) and to accept incoming modem calls.
Enable AAA accounting by using the aaa accounting network default start-stop group radius command in global configuration mode.
Familiarize yourself with the V.92 Quick Connect and V.92 Modem on Hold features. See Related Documents.
Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info
If V.92 is not negotiated on your server, V.92 information will not be included in the accounting record.
Because the attribute v.92-info information is sent as a Cisco VSA, if you configure your RADIUS server as nonstandard (using a non-Cisco server), the V.92 call information will not be sent by default. However, you can still get the V.92 call information by first configuring the radius-server vsa sendcommand with the accounting keyword (that is, radius-server vsa send accounting).
Information About V.92 Reporting Using RADIUS Attribute v.92-info
V.92 Standard Overview
The International Telecommunication Union Telecommunication Standardization Sector (ITU-T) V.92 standard encompasses a number of specifications, including Quick Connect (QC), which dramatically improves how quickly users can connect with their Internet service provider (ISP), and Modem on Hold (MoH), which enables users to suspend and reactivate their dial-up connection to either receive or initiate a telephone call. V.92 also includes pulse code modulation (PCM) upstream, which boosts the upstream data rates from the user to the ISP to reduce transfer times for large files and e-mail attachments sent by the user.
VSA v.92-info
The VSA v.92-info information in RADIUS accounting “start” and “stop” records can help you track V.92 feature set information. The VSA is enabled by default for all sessions that reside over a modem call that is connected using V.92 model modulation.
The VSA information is displayed in the “start” and “stop” records as follows:
v92-info=<V.92 features supported>/<QC Exchange>/<Total MOH time>/<MOH count>
The VSA v92-info has the following four subfields:
V.92 features supported--All features that are available for the V.92 modem user who is dialing in. These features include QC, MoH, and PCM Upstream.
QC Exchange--If QC was initiated, this subfield states what feature set (within QC) was attempted.
Total MOH time--If MoH was initiated, this subfield indicates the duration for which the original call was put on hold.
MOH count--If MOH was initiated, this field indicates how many times the MOH was initiated.
The following is an example of VSA v92-info information displayed in an accounting recorF:\tips-migration
v92-info=V.92 QC MOH/QC Requested/60/1
How to Monitor and Verify V.92 Call Information
Monitoring V.92 Call Information
To monitor the V.92 information in the accounting “start” and “stop” records, you can perform the following task using some or all of the debug commands that are listeF:\tips-migration
1.
enable
2.
debug
aaa
accounting
3.
debug
aaa
authentication
4.
debug
aaa
authorization
5. debug isdn event
6. debug modem csm [slot/port | group group-number]
7. debug ppp {negotiation | authentication}
8.
debug
radius
DETAILED STEPS
Examples
The following sample debug outputs display information about a V.92 reporting situation:
01:39:19: ISDN Se7/6:23: RX <- SETUP pd = 8 callref = 0x42A0 01:39:19: Bearer Capability i = 0x9090A2 01:39:19: Channel ID i = 0xA18396 01:39:19: Progress Ind i = 0x8183 - Origination address is non-ISDN 01:39:19: Calling Party Number i = 0xA1, '60112', Plan:ISDN, Type:National 01:39:19: Called Party Number i = 0xA1, '50138', Plan:ISDN, Type:National 01:39:19: Locking Shift to Codeset 6 01:39:19: Codeset 6 IE 0x28 i = 'ANALOG,savitha' 01:39:19: ISDN Se7/6:23: Incoming call id = 0x0038, dsl 0 01:39:19: ISDN Se7/6:23: NegotiateBchan: bchan 22 intid 0 serv_st 0 chan_st 0 callid 0x0000 ev 0x90 n/w? 0 01:39:19: Negotiated int_id 0 bchan 0 cr=0xC2A0 callid=0x0038 lo_chan 22 final int_id/bchan 0/22 cause 0x0 01:39:19: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_INCOMING 01:39:19: ISDN Se7/6:23: CALL_INCOMING dsl 0 bchan 21 01:39:19: voice_parse_intf_name: Using the old NAS_PORT string 01:39:19: AAA/ACCT/EVENT/(00000007): CALL START 01:39:19: AAA/ACCT(00000000): add node, session 9 01:39:19: AAA/ACCT/NET(00000007): add, count 1 01:39:19: AAA/ACCT/EVENT/(00000007): ATTR REPLACE 01:39:19: ISDN Se7/6:23: CALL_INCOMING: call type is VOICE ULAW, bchan = 21 01:39:19: ISDN Se7/6:23: Event: Received a VOICE call from 60112 on B21 at 64 Kb/s Tone Value 0 01:39:19: AAA/ACCT/DS0: channel=21, ds1=6, t3=0, slot=7, ds0=117465109 01:39:19: AAA/ACCT/DS0: channel=21, ds1=6, t3=0, slot=7, ds0=117465109 01:39:19: VDEV_ALLOCATE: 1/5 is allocated 01:39:19: ISDN Se7/6:23: RM returned call_type 1 resource type 0 response 2 01:39:19: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x0 bchan=0x15, event=0x1, cause=0x0 01:39:19: dev in call to isdn : set dnis_collected & fap_notify 01:39:19: EVENT_FROM_ISDN:(0038): DEV_INCALL at slot 1 and port 5 01:39:19: EVENT_FROM_ISDN: decode:calling oct3 0xA1, called oct3 0xA1, oct3a 0x0,mask 0x3D 01:39:19: EVENT_FROM_ISDN: csm_call_info:calling oct3 0xA1, called oct3 0xA1, oct3a 0x0,mask 0x3D 01:39:19: CSM_PROC_IDLE: CSM_EVENT_ISDN_CALL at slot 1, port 5 01:39:19: CSM DSPLIB(1/5/csm_flags=0x12): np_dsplib_prepare_modem 01:39:19: csm_connect_pri_vdev: TS allocated at bp_stream 0, bp_Ch 5, vdev_common 0x62EAD8F4 1/5 01:39:19: ISDN Se7/6:23: EVENT to CSM:DEV_INCALL: calltype=VOICE, bchan=21 01:39:19: ISDN Se7/6:23: TX -> CALL_PROC pd = 8 callref = 0xC2A0 01:39:19: Channel ID i = 0xA98396 01:39:19: ISDN Se7/6:23: TX -> ALERTING pd = 8 callref = 0xC2A0 01:39:19: CSM DSPLIB(1/5):DSPLIB_MODEM_INIT: Modem session transition to IDLE 01:39:19: CSM DSPLIB(1/5): Modem went offhook 01:39:19: CSM_PROC_IC2_RING: CSM_EVENT_MODEM_OFFHOOK at slot 1, port 5 01:39:19: ISDN Se7/6:23: VOICE_ANS Event: call id 0x38, bchan 21, ces 0 01:39:19: ISDN Se7/6:23: isdn_send_connect(): msg 74, call id 0x38, ces 0 bchan 21, call type VOICE 01:39:19: ISDN Se7/6:23: TX -> CONNECT pd = 8 callref = 0xC2A0 01:39:19: ISDN Se7/6:23: RX <- CONNECT_ACK pd = 8 callref = 0x42A0 01:39:19: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_PROGRESS 01:39:19: ISDN Se7/6:23: event CALL_PROGRESS dsl 0 01:39:19: ISDN Se7/6:23: CALL_PROGRESS: CALL_CONNECTED call id 0x38, bchan 21, dsl 0 01:39:19: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x0 bchan=0x15, event=0x4, cause=0x0 01:39:19: EVENT_FROM_ISDN:(0038): DEV_CONNECTED at slot 1 and port 5 01:39:19: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_ISDN_CONNECTED at slot 1, port 5 01:39:19: CSM DSPLIB(1/5): np_dsplib_call_accept 01:39:19: ISDN Se7/6:23: EVENT to CSM:DEV_CONNECTEF:\tips-migration calltype=VOICE, bchan=21 01:39:19: CSM DSPLIB(1/5):DSPLIB_MODEM_WAIT_ACTIVE: Modem session transition to ACTIVE 01:39:19: CSM DSPLIB(1/5): Modem state changed to (CONNECT_STATE) 01:39:22: CSM DSPLIB(1/5): Modem state changed to (V8BIS_EXCHANGE_STATE) 01:39:24: CSM DSPLIB(1/5): Modem state changed to (LINK_STATE) 01:39:28: CSM DSPLIB(1/5): Modem state changed to (RANGING_STATE) 01:39:30: CSM DSPLIB(1/5): Modem state changed to (HALF_DUPLEX_TRAIN_STATE) 01:39:45: CSM DSPLIB(1/5): Modem state changed to (TRAINUP_STATE) 01:39:45: CSM DSPLIB(1/5): Modem state changed to (EC_NEGOTIATING_STATE) 01:39:46: CSM DSPLIB(1/5): Modem state changed to (STEADY_STATE) 01:39:46: TTY1/05: DSR came up 01:39:46: tty1/05: Modem: IDLE->(unknown) 01:39:46: TTY1/05: EXEC creation 01:39:46: CHAT1/05: Attempting line activation script 01:39:46: CHAT1/05: Asserting DTR 01:39:50: voice_parse_intf_name: Using the old NAS_PORT string 01:39:50: voice_parse_intf_name: Using the old NAS_PORT string 01:39:50: AAA/AUTHEN/LOGIN (00000007): Pick method list 'default' 01:39:50: RADIUS/ENCODE(00000007): ask "Username: " 01:39:50: RADIUS/ENCODE(00000007): send packet; GET_USER 01:39:50: TTY1/05: set timer type 10, 30 seconds 01:39:50: TTY1/05: Autoselect(2) sample 7E 01:39:50: TTY1/05: Autoselect(2) sample 7EFF 01:39:50: TTY1/05: Autoselect(2) sample 7EFF7D 01:39:50: TTY1/05: Autoselect(2) sample 7EFF7D23 01:39:50: TTY1/05 Autoselect cmF:\tips-migration ppp negotiate 01:39:50: TTY1/05: EXEC creation 01:39:50: CHAT1/05: Attempting line activation script 01:39:50: CHAT1/05: Asserting DTR 01:39:54: voice_parse_intf_name: Using the old NAS_PORT string 01:39:54: voice_parse_intf_name: Using the old NAS_PORT string 01:39:54: TTY1/05: no timer type 1 to destroy 01:39:54: TTY1/05: no timer type 0 to destroy 01:39:54: As1/05 LCP: I CONFREQ [Closed] id 0 len 50 01:39:54: As1/05 LCP: ACCM 0x00000000 (0x020600000000) 01:39:54: As1/05 LCP: MagicNumber 0x00002EB8 (0x050600002EB8) 01:39:54: As1/05 LCP: PFC (0x0702) 01:39:54: As1/05 LCP: ACFC (0x0802) 01:39:54: As1/05 LCP: Callback 6 (0x0D0306) 01:39:54: As1/05 LCP: MRRU 1614 (0x1104064E) 01:39:54: As1/05 LCP: EndpointDisc 1 Local 01:39:54: As1/05 LCP: (0x131701CC7F60A0E7A211D6B549000102) 01:39:54: As1/05 LCP: (0x2BC43900000000) 01:39:54: As1/05 LCP: Lower layer not up, Fast Starting 01:39:54: voice_parse_intf_name: Using the old NAS_PORT string 01:39:54: voice_parse_intf_name: Using the old NAS_PORT string 01:39:54: As1/05 PPP: Treating connection as a callin 01:39:54: As1/05 PPP: Phase is ESTABLISHING, Passive Open 01:39:54: As1/05 LCP: State is Listen 01:39:54: As1/05 PPP: Authorization required 01:39:54: As1/05 LCP: O CONFREQ [Listen] id 1 len 25 01:39:54: As1/05 LCP: ACCM 0x000A0000 (0x0206000A0000) 01:39:54: As1/05 LCP: AuthProto CHAP (0x0305C22305) 01:39:54: As1/05 LCP: MagicNumber 0x099EBCBA (0x0506099EBCBA) 01:39:54: As1/05 LCP: PFC (0x0702) 01:39:54: As1/05 LCP: ACFC (0x0802) 01:39:54: As1/05 LCP: O CONFREJ [Listen] id 0 len 11 01:39:54: As1/05 LCP: Callback 6 (0x0D0306) 01:39:54: As1/05 LCP: MRRU 1614 (0x1104064E) 01:39:54: As1/05 LCP: I CONFACK [REQsent] id 1 len 25 01:39:54: As1/05 LCP: ACCM 0x000A0000 (0x0206000A0000) 01:39:54: As1/05 LCP: AuthProto CHAP (0x0305C22305) 01:39:54: As1/05 LCP: MagicNumber 0x099EBCBA (0x0506099EBCBA) 01:39:54: As1/05 LCP: PFC (0x0702) 01:39:54: As1/05 LCP: ACFC (0x0802) 01:39:54: As1/05 LCP: I CONFREQ [ACKrcvd] id 1 len 43 01:39:54: As1/05 LCP: ACCM 0x00000000 (0x020600000000) 01:39:54: As1/05 LCP: MagicNumber 0x00002EB8 (0x050600002EB8) 01:39:54: As1/05 LCP: PFC (0x0702) 01:39:54: As1/05 LCP: ACFC (0x0802) 01:39:54: As1/05 LCP: EndpointDisc 1 Local 01:39:54: As1/05 LCP: (0x131701CC7F60A0E7A211D6B549000102) 01:39:54: As1/05 LCP: (0x2BC43900000000) 01:39:54: As1/05 LCP: O CONFACK [ACKrcvd] id 1 len 43 01:39:54: As1/05 LCP: ACCM 0x00000000 (0x020600000000) 01:39:54: As1/05 LCP: MagicNumber 0x00002EB8 (0x050600002EB8) 01:39:54: As1/05 LCP: PFC (0x0702) 01:39:54: As1/05 LCP: ACFC (0x0802) 01:39:54: As1/05 LCP: EndpointDisc 1 Local 01:39:54: As1/05 LCP: (0x131701CC7F60A0E7A211D6B549000102) 01:39:54: As1/05 LCP: (0x2BC43900000000) 01:39:54: As1/05 LCP: State is Open 01:39:54: As1/05 PPP: Phase is AUTHENTICATING, by this end 01:39:54: As1/05 CHAP: O CHALLENGE id 1 len 26 from "s5400" 01:39:54: As1/05 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x00002EB8 MSRASV4.00 01:39:54: As1/05 LCP: I IDENTIFY [Open] id 3 len 23 magic 0x00002EB8 MSRAS-1-PTE-PC1 01:39:54: As1/05 CHAP: I RESPONSE id 1 len 34 from "Administrator" 01:39:54: As1/05 PPP: Phase is FORWARDING, Attempting Forward 01:39:54: As1/05 PPP: Phase is AUTHENTICATING, Unauthenticated User 01:39:54: AAA/AUTHEN/PPP (00000007): Pick method list 'default' 01:39:54: As1/05 PPP: Sent CHAP LOGIN Request 01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface 01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface-type 01:39:54: RADIUS/ENCODE(00000007): acct_session_iF:\tips-migration 9 01:39:54: RADIUS(00000007): sending 01:39:54: RADIUS: Send to unknown id 2 10.107.164.120:1645, Access-Request, len 128 01:39:54: RADIUS: authenticator 13 E4 F2 9F BC 3E CE 52 - CC 93 0C E0 01 0C 73 7B 01:39:54: RADIUS: Framed-Protocol [7] 6 PPP [1] 01:39:54: RADIUS: User-Name [1] 15 "Administrator" 01:39:54: RADIUS: CHAP-Password [3] 19 * 01:39:54: RADIUS: Called-Station-Id [30] 7 "50138" 01:39:54: RADIUS: Calling-Station-Id [31] 7 "60112" 01:39:54: RADIUS: Vendor, Cisco [26] 30 01:39:54: RADIUS: cisco-nas-port [2] 24 "Async1/05*Serial7/6:21" 01:39:54: RADIUS: NAS-Port [5] 6 221 01:39:54: RADIUS: NAS-Port-Type [61] 6 Async [0] 01:39:54: RADIUS: Service-Type [6] 6 Framed [2] 01:39:54: RADIUS: NAS-IP-Address [4] 6 10.0.58.107 01:39:54: RADIUS: Received from id 2 10.107.164.120:1645, Access-Accept, len 62 01:39:54: RADIUS: authenticator EF 45 A3 D4 A7 EE D0 65 - 03 50 B4 3E 07 87 2E 2F 01:39:54: RADIUS: Vendor, Cisco [26] 30 01:39:54: RADIUS: cisco-nas-port [2] 24 "Async1/05*Serial7/6:21" 01:39:54: RADIUS: Service-Type [6] 6 Framed [2] 01:39:54: RADIUS: Framed-Protocol [7] 6 PPP [1] 01:39:54: RADIUS: Received from id 7 01:39:54: As1/05 PPP: Received LOGIN Response PASS 01:39:54: As1/05 PPP/AAA: Check Attr: interface 01:39:54: As1/05 PPP/AAA: Check Attr: service-type 01:39:54: As1/05 PPP/AAA: Check Attr: Framed-Protocol 01:39:54: As1/05 PPP: Phase is FORWARDING, Attempting Forward 01:39:54: As1/05 PPP: Phase is AUTHENTICATING, Authenticated User 01:39:54: As1/05 AAA/AUTHOR/LCP: Process Author 01:39:54: As1/05 AAA/AUTHOR/LCP: Process Attr: service-type 01:39:54: As1/05 CHAP: O SUCCESS id 1 len 4 01:39:54: AAA/ACCT/NET(00000007): Pick method list 'default' 01:39:54: AAA/ACCT/SETMLIST(00000007): Handle FFFFFFFF, mlist 630B11E4, Name default 01:39:54: AAA/ACCT/EVENT/(00000007): NET UP 01:39:54: AAA/ACCT/NET(00000007): Queueing record is START 01:39:54: As1/05 PPP: Phase is UP 01:39:54: As1/05 AAA/AUTHOR/IPCP: FSM authorization not needed 01:39:54: As1/05 AAA/AUTHOR/FSM: We can start IPCP 01:39:54: As1/05 IPCP: O CONFREQ [Closed] id 1 len 10 01:39:54: As1/05 IPCP: Address 10.1.1.2 (0x030646010102) 01:39:54: AAA/ACCT(00000007): Accouting method=radius (radius) 01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute timezone 01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface 01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface-type 01:39:54: RADIUS(00000007): sending 01:39:54: RADIUS: Send to unknown id 8 10.107.164.120:1646, Accounting-Request, len 243 01:39:54: RADIUS: authenticator 41 87 FA 03 EB F9 94 62 - B2 3A 24 B8 27 4C A4 BC 01:39:54: RADIUS: Acct-Session-Id [44] 10 "00000009" 01:39:54: RADIUS: Framed-Protocol [7] 6 PPP [1] 01:39:54: RADIUS: Connect-Info [77] 26 "52000/28800 V90/V44/LAPM" 01:39:54: RADIUS: Vendor, Cisco [26] 48 01:39:54: RADIUS: Cisco AVpair [1] 42 "v92-info=V.92 QC MOH/No QC Requested/0/0" 01:39:54: RADIUS: Vendor, Cisco [26] 32 01:39:54: RADIUS: Cisco AVpair [1] 26 "connect-progress=Call Up" 01:39:54: RADIUS: Authentic [45] 6 RADIUS [1] 01:39:54: RADIUS: User-Name [1] 15 "Administrator" 01:39:54: RADIUS: Acct-Status-Type [40] 6 Start [1] 01:39:54: RADIUS: Called-Station-Id [30] 7 "50138" 01:39:54: RADIUS: Calling-Station-Id [31] 7 "60112" 01:39:54: RADIUS: Vendor, Cisco [26] 30 01:39:54: RADIUS: cisco-nas-port [2] 24 "Async1/05*Serial7/6:21" 01:39:54: RADIUS: NAS-Port [5] 6 221 01:39:54: RADIUS: NAS-Port-Type [61] 6 Async [0] 01:39:54: RADIUS: Service-Type [6] 6 Framed [2] 01:39:54: RADIUS: NAS-IP-Address [4] 6 10.0.58.107 01:39:54: RADIUS: Acct-Delay-Time [41] 6 0 01:39:54: RADIUS: Received from id 8 10.107.164.120:1646, Accounting-response, len 20 01:39:54: RADIUS: authenticator E5 5C D3 69 88 D5 2E 8E - 49 AF 63 22 01 53 33 7B 01:39:54: AAA/ACCT/NET(00000007): START protocol reply PASS 01:39:54: As1/05 CCP: I CONFREQ [Not negotiated] id 4 len 211 01:39:54: As1/05 CCP: Type254 01:39:54: As1/05 CCP: (0xFEC90100000000000000000000000000) 01:39:54: As1/05 CCP: (0x000074FFC7000000000068000000A000) 01:39:54: As1/05 CCP: (0x00006C20563905000000C0000000A400) 01:39:54: As1/05 CCP: (0x0000BC000000186400007000E80018C8) 01:39:54: As1/05 CCP: (0x130017CCF1770000000001000000E8FE) 01:39:54: As1/05 CCP: (0xC70076CDF17706000000000000000000) 01:39:54: As1/05 CCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 CCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 CCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 CCP: (0x00000000000000000000220020000001) 01:39:54: As1/05 CCP: (0x0800000000005016B1CBA2E7D611B549) 01:39:54: As1/05 CCP: (0x0001022BC439C800000000000000C800) 01:39:54: As1/05 CCP: (0x00004D000000281FB8) 01:39:54: As1/05 CCP: MS-PPC supported bits 0x00000006 (0x120600000006) 01:39:54: As1/05 LCP: O PROTREJ [Open] id 2 len 217 protocol CCP 01:39:54: As1/05 LCP: (0x80FD010400D3FEC90100000000000000) 01:39:54: As1/05 LCP: (0x000000000000000074FFC70000000000) 01:39:54: As1/05 LCP: (0x68000000A00000006C20563905000000) 01:39:54: As1/05 LCP: (0xC0000000A4000000BC00000018640000) 01:39:54: As1/05 LCP: (0x7000E80018C8130017CCF17700000000) 01:39:54: As1/05 LCP: (0x01000000E8FEC70076CDF17706000000) 01:39:54: As1/05 LCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 LCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 LCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 LCP: (0x00000000000000000000000000000000) 01:39:54: As1/05 LCP: (0x2200200000010800000000005016B1CB) 01:39:54: As1/05 LCP: (0xA2E7D611B5490001022BC439C8000000) 01:39:54: As1/05 LCP: (0x00000000C80000004D000000281FB812) 01:39:54: As1/05 LCP: (0x0600000006) 01:39:54: As1/05 IPCP: I CONFREQ [REQsent] id 5 len 34 01:39:54: As1/05 IPCP: Address 0.0.0.0 (0x030600000000) 01:39:54: As1/05 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000) 01:39:54: As1/05 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000) 01:39:54: As1/05 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000) 01:39:54: As1/05 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000) 01:39:54: As1/05 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 10.2.2.6 01:39:54: As1/05 AAA/AUTHOR/IPCP: Authorization succeeded 01:39:54: As1/05 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 10.2.2.6 01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for primary dns 01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for primary wins 01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for seconday dns 01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for seconday wins 01:39:54: As1/05 IPCP: O CONFREJ [REQsent] id 5 len 28 01:39:54: As1/05 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000) 01:39:54: As1/05 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000) 01:39:54: As1/05 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000) 01:39:54: As1/05 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000) 01:39:54: As1/05 IPCP: I CONFACK [REQsent] id 1 len 10 01:39:54: As1/05 IPCP: Address 70.1.1.2 (0x030646010102) 01:39:54: As1/05 IPCP: I CONFREQ [ACKrcvd] id 6 len 10 01:39:54: As1/05 IPCP: Address 0.0.0.0 (0x030600000000) 01:39:54: As1/05 IPCP: O CONFNAK [ACKrcvd] id 6 len 10 01:39:54: As1/05 IPCP: Address 70.2.2.6 (0x030646020206) 01:39:55: As1/05 IPCP: I CONFREQ [ACKrcvd] id 7 len 10 01:39:55: As1/05 IPCP: Address 70.2.2.6 (0x030646020206) 01:39:55: As1/05 IPCP: O CONFACK [ACKrcvd] id 7 len 10 01:39:55: As1/05 IPCP: Address 70.2.2.6 (0x030646020206) 01:39:55: As1/05 IPCP: State is Open 01:39:55: AAA/ACCT/EVENT/(00000007): IPCP_PASS 01:39:55: As1/05 IPCP: Install route to 10.2.2.6 01:39:55: As1/05 IPCP: Add link info for cef entry 10.2.2.6
01:40:50: ISDN Se7/6:23: RX <- DISCONNECT pd = 8 callref = 0x42A0 01:40:50: Cause i = 0x8190 - Normal call clearing 01:40:50: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_DISC 01:40:50: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x0 bchan=0x15, event=0x0, cause=0x10 01:40:50: EVENT_FROM_ISDN:(0038): DEV_IDLE at slot 1 and port 5 01:40:50: CSM_PROC_IC7_OC6_CONNECTEF:\tips-migration CSM_EVENT_ISDN_DISCONNECTED at slot 1, port 5 01:40:50: CSM DSPLIB(1/5): np_dsplib_call_hangup reason 14 01:40:50: CSM(1/5): Enter csm_enter_disconnecting_state 01:40:50: VDEV_DEALLOCATE: slot 1 and port 5 is deallocated 01:40:50: ISDN Se7/6:23: EVENT to CSM:DEV_IDLE: calltype=VOICE, bchan=21 01:40:50: ISDN Se7/6:23: process_disc_ack(): call id 0x38, ces 0, call type VOICE cause 0x10 01:40:50: ISDN Se7/6:23: TX -> RELEASE pd = 8 callref = 0xC2A0 01:40:50: AAA/ACCT/EVENT/(00000007): CALL STOP 01:40:50: AAA/ACCT/CALL STOP(00000007): Sending stop requests 01:40:50: AAA/ACCT(00000007): Send all stops 01:40:50: AAA/ACCT/NET(00000007): STOP 01:40:50: AAA/ACCT/NET(00000007): Queueing record is STOP osr 1 01:40:50: AAA/ACCT(00000007): Accouting method=radius (radius) 01:40:50: RADIUS/ENCODE(00000007): Unsupported AAA attribute timezone 01:40:50: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface 01:40:50: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface-type 01:40:50: RADIUS(00000007): sending 01:40:50: RADIUS: Send to unknown id 9 10.107.164.120:1646, Accounting-Request, len 315 01:40:50: RADIUS: authenticator 2E 6A 04 D0 04 9A D3 D5 - F7 DD 99 E0 C3 99 27 60 01:40:50: RADIUS: Acct-Session-Id [44] 10 "00000009" 01:40:50: RADIUS: Framed-Protocol [7] 6 PPP [1] 01:40:50: RADIUS: Framed-IP-Address [8] 6 70.2.2.6 01:40:50: RADIUS: Acct-Terminate-Cause[49] 6 lost-carrier [2] 01:40:50: RADIUS: Vendor, Cisco [26] 33 01:40:50: RADIUS: Cisco AVpair [1] 27 "disc-cause-ext=No Carrier" 01:40:50: RADIUS: Vendor, Cisco [26] 35 01:40:50: RADIUS: Cisco AVpair [1] 29 "connect-progress=LAN Ses Up" 01:40:50: RADIUS: Acct-Session-Time [46] 6 56 01:40:50: RADIUS: Connect-Info [77] 26 "52000/28800 V90/V44/LAPM" 01:40:50: RADIUS: Vendor, Cisco [26] 48 01:40:50: RADIUS: Cisco AVpair [1] 42 "v92-info=V.92 QC MOH/No QC Requested/0/0" 01:40:50: RADIUS: Acct-Input-Octets [42] 6 285 01:40:50: RADIUS: Acct-Output-Octets [43] 6 295 01:40:50: RADIUS: Acct-Input-Packets [47] 6 5 01:40:50: RADIUS: Acct-Output-Packets [48] 6 5 01:40:50: RADIUS: User-Name [1] 15 "Administrator" 01:40:50: RADIUS: Acct-Status-Type [40] 6 Stop [2] 01:40:50: RADIUS: Called-Station-Id [30] 7 "50138" 01:40:50: RADIUS: Calling-Station-Id [31] 7 "60112" 01:40:50: RADIUS: Vendor, Cisco [26] 30 01:40:50: RADIUS: cisco-nas-port [2] 24 "Async1/05*Serial7/6:21" 01:40:50: RADIUS: NAS-Port [5] 6 221 01:40:50: RADIUS: NAS-Port-Type [61] 6 Async [0] 01:40:50: RADIUS: Service-Type [6] 6 Framed [2] 01:40:50: RADIUS: NAS-IP-Address [4] 6 10.0.58.107 01:40:50: RADIUS: Acct-Delay-Time [41] 6 0 01:40:50: RADIUS: Received from id 9 10.107.164.120:1646, Accounting-response, len 20 01:40:50: RADIUS: authenticator D0 3F 32 D7 7C 8C 5E 22 - 9A 69 EF 17 AC 32 81 21 01:40:50: AAA/ACCT/NET(00000007): STOP protocol reply PASS 01:40:50: AAA/ACCT/NET(00000007): Cleaning up from Callback osr 0 01:40:50: AAA/ACCT(00000007): del node, session 9 01:40:50: AAA/ACCT/NET(00000007): free_rec, count 0 01:40:50: AAA/ACCT/NET(00000007) reccnt 0, csr TRUE, osr 0 01:40:50: AAA/ACCT/NET(00000007): Last rec in db, intf not enqueued 01:40:50: ISDN Se7/6:23: RX <- RELEASE_COMP pd = 8 callref = 0x42A0 01:40:50: ISDN Se7/6:23: CCPRI_ReleaseCall(): bchan 22, call id 0x38, call type VOICE 01:40:50: CCPRI_ReleaseChan released b_dsl 0 B_Chan 22 01:40:50: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_CLEARED 01:40:50: ISDN Se7/6:23: received CALL_CLEARED call_id 0x38 01:40:50: no resend setup, no redial 01:40:50: no resend setup, no redial 01:40:50: AAA/ACCT/DS0: channel=21, ds1=6, t3=0, slot=7, ds0=117465109 01:40:50: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x1 bchan=0x15, event=0x0, cause=0x0 01:40:50: ISDN Se7/6:23: EVENT to CSM:DEV_IDLE: calltype=VOICE, bchan=21 01:40:51: CSM DSPLIB(1/5): Modem state changed to (TERMINATING_STATE) 01:40:51: CSM DSPLIB(1/5): Modem went onhook 01:40:51: CSM_PROC_IC8_OC8_DISCONNECTING: CSM_EVENT_MODEM_ONHOOK at slot 1, port 5 01:40:51: CSM(1/5): Enter csm_enter_idle_state 01:40:51: CSM DSPLIB(1/5):DSPLIB_IDLE: Modem session transition to FLUSHING 01:40:51: CSM DSPLIB(1/5):DSPLIB_IDLE: Modem session transition to IDLE 01:40:51: TTY1/05: DSR was dropped 01:40:51: tty1/05: Modem: READY->(unknown) 01:40:52: TTY1/05: dropping DTR, hanging up 01:40:52: DSPLIB(1/5): np_dsplib_process_dtr_notify() 01:40:52: CSM DSPLIB(1/5): Modem went onhook 01:40:52: CSM_PROC_IDLE: CSM_EVENT_MODEM_ONHOOK at slot 1, port 5 01:40:52: TTY1/05: Async Int reset: Dropping DTR 01:40:52: tty1/05: Modem: HANGUP->(unknown) 01:40:52: AAA/ACCT/EVENT/(00000007): NET DOWN 01:40:52: As1/05 IPCP: Remove link info for cef entry 70.2.2.6 01:40:52: As1/05 IPCP: State is Closed 01:40:52: As1/05 PPP: Phase is TERMINATING 01:40:52: As1/05 LCP: State is Closed 01:40:52: As1/05 PPP: Phase is DOWN 01:40:52: As1/05 IPCP: Remove route to 70.2.2.6 01:40:52: As1/05 LCP: State is Closed 01:40:53: TTY1/05: cleanup pending. Delaying DTR 01:40:54: TTY1/05: cleanup pending. Delaying DTR 01:40:55: TTY1/05: cleanup pending. Delaying DTR 01:40:56: TTY1/05: cleanup pending. Delaying DTR 01:40:57: TTY1/05: no timer type 0 to destroy 01:40:57: TTY1/05: no timer type 1 to destroy 01:40:57: TTY1/05: no timer type 3 to destroy 01:40:57: TTY1/05: no timer type 4 to destroy 01:40:57: TTY1/05: no timer type 2 to destroy 01:40:57: Async1/05: allowing modem_process to continue hangup 01:40:57: TTY1/05: restoring DTR 01:40:57: TTY1/05: autoconfigure probe started 01:40:57: As1/05 LCP: State is Closed
Verifying V.92 Call Information
To verify that the V.92 call was correctly established, use the following show commands:
1.
show
modem
[slot/port |
group
number]
2.
show
port
modem
log
[reverse
slot/port] [slot |
slot/port]
3.
show
users
[all]
DETAILED STEPS
| Command or Action | Purpose | |
|---|---|---|
| Step 1 |
show
modem
[slot/port |
group
number]
Example: Router# show modem 1/0 group 1 |
Displays a high-level performance report for all the modems or a single modem inside Cisco access servers. |
| Step 2 |
show
port
modem
log
[reverse
slot/port] [slot |
slot/port]
Example: Router# show port modem log |
Displays the events generated by the modem sessions. |
| Step 3 |
show
users
[all]
Example: Router# show users |
Displays information about the active lines on the router. |
Examples
The following V.92 reporting outputs are from the show port modem log and show users commands:
Router# show port modem log 1/05
Port 1/05 Events Log
01:46:19: Service Type: DATA_FAX_MODEM
01:46:19: Service Mode: DATA_FAX_MODEM
01:46:19: Session State: IDLE
01:46:19: incoming caller number: 60112
01:46:19: incoming called number: 50138
01:46:19: Service Type: DATA_FAX_MODEM
01:46:19: Service Mode: DATA_FAX_MODEM
01:46:19: Session State: IDLE
01:46:19: Service Type: DATA_FAX_MODEM
01:46:19: Service Mode: DATA_FAX_MODEM
01:46:19: Session State: ACTIVE
01:46:19: Modem State event:
State: Connect
01:46:20: Modem State event:
State: V.8bis Exchange
01:46:20: Modem State event:
State: Link
01:46:20: Modem State event:
State: Ranging
01:46:20: Modem State event:
State: Half Duplex Train
01:46:20: Modem State event:
State: Train Up
01:46:20: Modem State event:
State: EC Negotiating
01:46:20: Modem State event:
State: Steady
01:46:20: Modem Static event:
Connect Protocol : LAP-M
Compression : V.44
Connected Standard : V.90
TX,RX Symbol Rate : 8000, 3200
TX,RX Carrier Frequency : 0, 1829
TX,RX Trellis Coding : 16/No trellis
Frequency Offset : 0 Hz
Round Trip Delay : 0 msecs
TX,RX Bit Rate : 52000, 28800
Robbed Bit Signalling (RBS) pattern : 255
Digital Pad : 6 dB
Digital Pad Compensation : Enabled
MNP10EC : Off-None
QC Exchange : No QC Requested
TX,RX Negotiated String Length : 255, 255
DC TX,RX Negotiated Codewords : 1024, 1024
DC TX,RX Negotiated History Size : 4096, 5120
01:46:21: ISDN Se7/6:23: RX <- SERVICE pd = 3 callref = 0x0000
01:46:21: Change Status i = 0xC0 - in-service
01:46:21: Channel ID i = 0xA98381
01:46:21: ISDN Se7/6:23: Incoming call id = 0x003A, dsl 0
01:46:21: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x0 CHAN_STATUS
01:46:21: ISDN Se7/6:23: CHAN_STATUS B-chan=1, action=2; Maintenance.
01:46:21: ISDN Se7/6:23: TX -> SERVICE ACKNOWLEDGE pd = 3 callref = 0x8000
01:46:21: Change Status i = 0xC0 - in-service
01:46:21: Channel ID i = 1
s5400#sh port modem log 1/05
Port 1/05 Events Log
01:46:30: Service Type: DATA_FAX_MODEM
01:46:30: Service Mode: DATA_FAX_MODEM
01:46:30: Session State: IDLE
01:46:30: incoming caller number: 60112
01:46:30: incoming called number: 50138
01:46:30: Service Type: DATA_FAX_MODEM
01:46:30: Service Mode: DATA_FAX_MODEM
01:46:30: Session State: IDLE
01:46:30: Service Type: DATA_FAX_MODEM
01:46:30: Service Mode: DATA_FAX_MODEM
01:46:30: Session State: ACTIVE
01:46:30: Modem State event:
State: Connect
01:46:30: Modem State event:
State: V.8bis Exchange
01:46:30: Modem State event:
State: Link
01:46:30: Modem State event:
State: Ranging
01:46:30: Modem State event:
State: Half Duplex Train
01:46:30: Modem State event:
State: Train Up
01:46:31: Modem State event:
State: EC Negotiating
01:46:31: Modem State event:
State: Steady
01:46:31: Modem Static event:
Connect Protocol : LAP-M
Compression : V.44
Connected Standard : V.90
TX,RX Symbol Rate : 8000, 3200
TX,RX Carrier Frequency : 0, 1829
TX,RX Trellis Coding : 16/No trellis
Frequency Offset : 0 Hz
Round Trip Delay : 0 msecs
TX,RX Bit Rate : 52000, 28800
Robbed Bit Signalling (RBS) pattern : 255
Digital Pad : 6 dB
Digital Pad Compensation : Enabled
MNP10EC : Off-None
QC Exchange : No QC Requested
TX,RX Negotiated String Length : 255, 255
DC TX,RX Negotiated Codewords : 1024, 1024
DC TX,RX Negotiated History Size : 4096, 5120
Diagnostic Code : 00 00 00 00 00 00 00 00
V.92 Status : V.92 QC MOH
01:46:32: Modem Dynamic event:
Sq Value : 6
Signal Noise Ratio : 38 dB
Receive Level : -11 dBm
Phase Jitter Frequency : 0 Hz
Phase Jitter Level : 0 degrees
Far End Echo Level : 0 dBm
Phase Roll : 0 degrees
Total Retrains : 0
EC Retransmission Count : 0
Characters transmitted, received : 0, 0
Characters received BAD : 0
PPP/SLIP packets transmitted, received : 0, 0
PPP/SLIP packets received (BAD/ABORTED) : 0
EC packets transmitted, received OK : 0, 0
EC packets (Received BAD/ABORTED) : 0
Total Speedshifts : 0
Total MOH Time : 0 secs
Current MOH Time : 0 secs
MOH Status : Modem is Not on Hold
MOH Count : 0
MOH Request Count : 0
Retrains due to Call Waiting : 0
DC Encoder,Decoder State : compressed/compressed
DC TX,RX Compression Ratio : not calculated/not calculated
DC TX,RX Dictionary Reset Count : 0, 0
Diagnostic Code : 00 00 00 00 00 00 00 00
01:46:35: Modem State event:
State: Terminate
01:46:35: Service Type: DATA_FAX_MODEM
01:46:35: Service Mode: DATA_FAX_MODEM
01:46:35: Session State: FLUSHING
01:46:35: Service Type: DATA_FAX_MODEM
01:46:35: Service Mode: DATA_FAX_MODEM
01:46:35: Session State: IDLE
01:46:35: Modem End Connect event:
Call Timer : 65 secs
Disconnect Reason Info : 0x220
Type (=0 ): <unknown>
Class (=2 ): EC condition - locally detected
Reason (=32 ): received DISC frame -- normal LAPM termination
Total Retrains : 0
EC Retransmission Count : 0
Characters transmitted, received : 677, 817
Characters received BAD : 0
PPP/SLIP packets transmitted, received : 10, 10
PPP/SLIP packets received (BAD/ABORTED) : 0
EC packets transmitted, received OK : 10, 21
EC packets (Received BAD/ABORTED) : 0
TX,RX Bit Rate : 52000, 28800
Total Speedshifts : 0
Total MOH Time : 0 secs
Current MOH Time : 0 secs
MOH Status : Modem is Not on Hold
MOH Count : 0
MOH Request Count : 0
Retrains due to Call Waiting : 0
DC Encoder,Decoder State : compressed/compressed
DC TX,RX Compression Ratio : 1.67:1/1.65:1
DC TX,RX Dictionary Reset Count : 0, 1
Diagnostic Code : 00 00 00 00 00 00 00 00
01:46:37:Modem Link Rate event:
Router# show users
Line User Host(s) Idle Location
* 0 con 0 idle 00:00:00
tty 1/05 Administra Async interface 00:00:29 PPP: 70.2.2.6
Interface User Mode Idle Peer Address
Troubleshooting Tips
If you see that V.92 call information is not being reported by AAA, ensure that the call is a V.92 call by using the show modem command or by looking at the modem logs by using the show modem logcommand.
Additional References
The following sections provide references related to theV.92 Reporting Using RADIUS Attribute v.92-info feature.
Related Documents
|
Related Topic |
Document Title |
|---|---|
|
AAA accounting |
“ AAA Accounting ” module. |
|
AAA accounting commands |
Cisco IOS Security Command Reference |
|
V.92 Quick Connect feature |
V.92 Quick Connect for Cisco AS5300 and Cisco AS5800 Universal Access Servers |
|
V.92 Modem on Hold feature |
V.92 Modem on Hold for Cisco AS5300 and Cisco AS5800 Universal Access Servers |
Standards
|
Standards |
Title |
|---|---|
|
None. |
-- |
MIBs
|
MIBs |
MIBs Link |
|---|---|
|
None. |
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: |
RFCs
|
RFCs |
Title |
|---|---|
|
None. |
-- |
Technical Assistance
|
Description |
Link |
|---|---|
|
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for V.92 Reporting Using RADIUS Attribute v.92-info
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
|
Feature Name |
Releases |
Feature Information |
|---|---|---|
|
V.92 Reporting Using RADIUS Attribute v.92-info |
12.3(1) |
The V.92 Reporting Using RADIUS Attribute v.92-info feature provides the ability to track V.92 call information, such as V.92 features that are supported, the Quick Connect feature set that was attempted, the duration for which the original call was put on hold, and how many times Modem On Hold was initiated. The vendor-specific attribute (VSA) v.92-info is included in accounting “start” and “stop” records when modems negotiate a V.92 connection. This feature was introduced in Cisco IOS Release 12.3(1). |