- Cisco Unified Border Element Protocol-Independent Features and Setup
- Interworking Between RSVP Capable and RSVP Incapable Networks
- SIP INFO Method for DTMF Tone Generation
- WebEx Telepresence Media Support Over Single SIP Session
- DTMF Events through SIP Signaling
- Call Progress Analysis Over IP-to-IP Media Session
- Codec Preference Lists
- AAC-LD MP4A-LATM Codec Support on Cisco UBE
- Multicast Music-on-Hold Support on Cisco UBE
- Network-Based Recording
- Video Recording - Additional Configurations
- TDoS Attack Mitigation
- Cisco Unified Communications Gateway Services--Extended Media Forking
- Dynamic Payload Type Interworking for DTMF and Codec Packets for SIP-to-SIP Calls
- Acoustic Shock Protection
- Noise Reduction
- iLBC Support for SIP and H.323
- Configuring RTP Media Loopback for SIP Calls
- SIP Ability to Send a SIP Registration Message on a Border Element
- Session Refresh with Reinvites
- SIP Stack Portability
- Interworking of Secure RTP calls for SIP and H.323
- Cisco UBE Support for SRTP-RTP Internetworking
- Support for SRTP Termination
- Configuring RTCP Report Generation
- SIP SRTP Fallback to Nonsecure RTP
- Configuring Support for Interworking Between RSVP Capable and RSVP Incapable Networks
- VoIP for IPv6
- Mid-call Signaling Consumption
- Support for Software Media Termination Point
- Cisco Unified Communication Trusted Firewall Control
- Cisco Unified Communication Trusted Firewall Control-Version II
- Domain-Based Routing Support on the Cisco UBE
- URI-Based Dialing Enhancements
- Fax Detection for SIP Call and Transfer
- Finding Feature Information
- Restrictions for WebEx Telepresence Media Support Over Single SIP Session
- Information About WebEx Telepresence Media Support Over Single SIP Session
- Monitoring WebEx Telepresence Media Support Over Single SIP Session
- Feature Information for WebEx Telepresence Media Support Over Single SIP Session
WebEx Telepresence Media Support Over Single SIP Session
The WebEx Telepresence Media Support over Single SIP Session feature provides support for end-to-end negotiation of up to 6 m-lines or media lines over a single Session Initiation Protocol (SIP) session. The media types can be audio, video, or application.
- Finding Feature Information
- Restrictions for WebEx Telepresence Media Support Over Single SIP Session
- Information About WebEx Telepresence Media Support Over Single SIP Session
- Monitoring WebEx Telepresence Media Support Over Single SIP Session
- Feature Information for WebEx Telepresence Media Support Over Single SIP Session
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Restrictions for WebEx Telepresence Media Support Over Single SIP Session
Information About WebEx Telepresence Media Support Over Single SIP Session
The WebEx Telepresence Media Support over Single SIP Session feature provides the following support:
End-to-end negotiation of multiple m-lines.
Negotiation of Binary Floor Control Protocol (BFCP), IX, and H.224 protocol m-lines (m=application) and creation of Real-time Transport Protocol (RTP) or UDP streams for the same.
Early-Offer (EO-EO) and Delayed-Offer (DO-DO) calls' support by the Cisco Unified Border Element (Cisco UBE) with multiple m-lines.
End-to-end negotiation of multiple m-lines of same media type for video and application (but not audio).
Mid-call escalation and de-escalation for multiple application and video m-lines.
Secure RTP (SRTP) passthrough for all RTP streams (audio, video, and application).
SRTP-RTP interworking for video (ASR only).
Multiple dynamic payload types in the same m-line for the H.264 codec.
You can use the show voip rtp connections and show call active video compact commands to see the details about additional video and application streams.
Monitoring WebEx Telepresence Media Support Over Single SIP Session
Perform this task to see the details about additional video and application streams. The show commands can be entered in any order.
1.
enable
2.
show call active video compact
3.
show voip rtp connections
4.
show sip-ua calls
DETAILED STEPS
Feature Information for WebEx Telepresence Media Support Over Single SIP Session
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to . An account on Cisco.com is not required.Feature Name |
Releases |
Feature Information |
---|---|---|
WebEx Telepresence Media Support Over Single SIP Session |
15.3(2)T |
The WebEx Telepresence Media Support over Single SIP Session feature provides support for end-to-end negotiation of up to 6 m-lines or media lines over a single Session Initiation Protocol (SIP) session. The media types can be audio, video, or application. |
WebEx Telepresence Media Support Over Single SIP Session |
Cisco IOS XE Release 3.9S |
The WebEx Telepresence Media Support over Single SIP Session feature provides support for end-to-end negotiation of up to 6 m-lines or media lines over a single Session Initiation Protocol (SIP) session. The media types can be audio, video, or application. |